Fix typos in comment.

Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
---
 drivers/scsi/megaraid/megaraid_sas_fusion.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 6650f8c8e9b0..c53c29a0a018 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -80,7 +80,7 @@ static void megasas_fusion_crash_dump(struct megasas_instance *instance);
  * @ocr_context:			If called from OCR context this will
  *					be set to 1, else 0
  *
- * This function initates a chip reset followed by a wait for controller to
+ * This function initiates a chip reset followed by a wait for controller to
  * transition to ready state.
  * During this, driver will block all access to PCI config space from userspace
  */
@@ -334,7 +334,7 @@ megasas_fire_cmd_fusion(struct megasas_instance *instance,
  *
  * This function is only for fusion controllers.
  * Update host can queue, if firmware downgrade max supported firmware commands.
- * Firmware upgrade case will be skiped because underlying firmware has
+ * Firmware upgrade case will be skipped because underlying firmware has
  * more resource than exposed to the OS.
  *
  */
@@ -2588,7 +2588,7 @@ static void megasas_stream_detect(struct megasas_instance *instance,
 			if ((io_info->ldStartBlock != current_sd->next_seq_lba)	&&
 			    ((!io_info->isRead) || (!is_read_ahead)))
 				/*
-				 * Once the API availible we need to change this.
+				 * Once the API available we need to change this.
 				 * At this point we are not allowing any gap
 				 */
 				continue;
@@ -4650,7 +4650,7 @@ megasas_issue_tm(struct megasas_instance *instance, u16 device_handle,
 }
 
 /*
- * megasas_fusion_smid_lookup : Look for fusion command correpspodning to SCSI
+ * megasas_fusion_smid_lookup : Look for fusion command corresponding to SCSI
  * @instance: per adapter struct
  *
  * Return Non Zero index, if SMID found in outstanding commands
-- 
2.11.0

Hi--

These changes all look good.
One small nit below:

On 11/24/22 01:25, Yu Zhe wrote:
> Fix typos in comment.
> 
> Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
> ---
>  drivers/scsi/megaraid/megaraid_sas_fusion.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
> index 6650f8c8e9b0..c53c29a0a018 100644
> --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
> +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
> @@ -80,7 +80,7 @@ static void megasas_fusion_crash_dump(struct megasas_instance *instance);
>   * @ocr_context:			If called from OCR context this will
>   *					be set to 1, else 0
>   *
> - * This function initates a chip reset followed by a wait for controller to
> + * This function initiates a chip reset followed by a wait for controller to
>   * transition to ready state.
>   * During this, driver will block all access to PCI config space from userspace
>   */
> @@ -334,7 +334,7 @@ megasas_fire_cmd_fusion(struct megasas_instance *instance,
>   *
>   * This function is only for fusion controllers.
>   * Update host can queue, if firmware downgrade max supported firmware commands.
> - * Firmware upgrade case will be skiped because underlying firmware has
> + * Firmware upgrade case will be skipped because underlying firmware has
>   * more resource than exposed to the OS.
>   *
>   */
> @@ -2588,7 +2588,7 @@ static void megasas_stream_detect(struct megasas_instance *instance,
>  			if ((io_info->ldStartBlock != current_sd->next_seq_lba)	&&
>  			    ((!io_info->isRead) || (!is_read_ahead)))
>  				/*
> -				 * Once the API availible we need to change this.
> +				 * Once the API available we need to change this.

				 * Once the API is available we need to change this.

>  				 * At this point we are not allowing any gap
>  				 */
>  				continue;
> @@ -4650,7 +4650,7 @@ megasas_issue_tm(struct megasas_instance *instance, u16 device_handle,
>  }
>  
>  /*
> - * megasas_fusion_smid_lookup : Look for fusion command correpspodning to SCSI
> + * megasas_fusion_smid_lookup : Look for fusion command corresponding to SCSI
>   * @instance: per adapter struct
>   *
>   * Return Non Zero index, if SMID found in outstanding commands

Reviewed-by: Randy Dunlap <rdunlap@infradead.org>

Thanks.
-- 
~Randy

Fix typos in comment.

Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
---
 drivers/scsi/megaraid/megaraid_sas_fusion.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 6650f8c8e9b0..fe70f8f11435 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -80,7 +80,7 @@ static void megasas_fusion_crash_dump(struct megasas_instance *instance);
  * @ocr_context:			If called from OCR context this will
  *					be set to 1, else 0
  *
- * This function initates a chip reset followed by a wait for controller to
+ * This function initiates a chip reset followed by a wait for controller to
  * transition to ready state.
  * During this, driver will block all access to PCI config space from userspace
  */
@@ -334,7 +334,7 @@ megasas_fire_cmd_fusion(struct megasas_instance *instance,
  *
  * This function is only for fusion controllers.
  * Update host can queue, if firmware downgrade max supported firmware commands.
- * Firmware upgrade case will be skiped because underlying firmware has
+ * Firmware upgrade case will be skipped because underlying firmware has
  * more resource than exposed to the OS.
  *
  */
@@ -2588,7 +2588,7 @@ static void megasas_stream_detect(struct megasas_instance *instance,
 			if ((io_info->ldStartBlock != current_sd->next_seq_lba)	&&
 			    ((!io_info->isRead) || (!is_read_ahead)))
 				/*
-				 * Once the API availible we need to change this.
+				 * Once the API is available we need to change this.
 				 * At this point we are not allowing any gap
 				 */
 				continue;
@@ -4650,7 +4650,7 @@ megasas_issue_tm(struct megasas_instance *instance, u16 device_handle,
 }
 
 /*
- * megasas_fusion_smid_lookup : Look for fusion command correpspodning to SCSI
+ * megasas_fusion_smid_lookup : Look for fusion command corresponding to SCSI
  * @instance: per adapter struct
  *
  * Return Non Zero index, if SMID found in outstanding commands
-- 
2.11.0

On Fri, 25 Nov 2022 10:07:03 +0800, Yu Zhe wrote:

> Fix typos in comment.
> 
> 

Applied to 6.2/scsi-queue, thanks!

[1/1] scsi: megaraid_sas: fix some spelling mistakes in comment
      https://git.kernel.org/mkp/scsi/c/76dc609556c6

-- 
Martin K. Petersen	Oracle Linux Engineering

Yu,

> Fix typos in comment.

Applied to 6.2/scsi-staging, thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering