Add dt-binding schema for the Qualcomm SNPS eUSB2 repeater.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 .../usb/qcom,snps-eusb2-repeater.yaml         | 43 +++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/qcom,snps-eusb2-repeater.yaml

diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-eusb2-repeater.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-eusb2-repeater.yaml
new file mode 100644
index 000000000000..f2b5ace675eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,snps-eusb2-repeater.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/qcom,snps-eusb2-repeater.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Synopsis eUSB2 to USB 2.0 repeater
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+
+properties:
+  compatible:
+    const: qcom,pm8550b-eusb2-repeater
+
+  reg:
+    maxItems: 1
+
+  vdd18-supply: true
+
+  vdd3-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+    pm8550b: pmic@7 {
+        compatible = "qcom,pm8550", "qcom,spmi-pmic";
+        reg = <0x7 SPMI_USID>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pm8550b_eusb2_repeater: usb-repeater@fd00 {
+            compatible = "qcom,pm8550b-eusb2-repeater";
+            reg = <0xfd00>;
+        };
+    };
+...
-- 
2.34.1

On Wed, 16 Nov 2022 14:30:18 +0200, Abel Vesa wrote:
> Add dt-binding schema for the Qualcomm SNPS eUSB2 repeater.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  .../usb/qcom,snps-eusb2-repeater.yaml         | 43 +++++++++++++++++++
>  1 file changed, 43 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/qcom,snps-eusb2-repeater.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/qcom,snps-eusb2-repeater.example.dtb: pmic@7: compatible:0: 'qcom,pm8550' is not one of ['qcom,pm6150', 'qcom,pm6150l', 'qcom,pm6350', 'qcom,pm660', 'qcom,pm660l', 'qcom,pm7250b', 'qcom,pm7325', 'qcom,pm8004', 'qcom,pm8005', 'qcom,pm8009', 'qcom,pm8019', 'qcom,pm8028', 'qcom,pm8110', 'qcom,pm8150', 'qcom,pm8150b', 'qcom,pm8150c', 'qcom,pm8150l', 'qcom,pm8226', 'qcom,pm8350', 'qcom,pm8350b', 'qcom,pm8350c', 'qcom,pm8841', 'qcom,pm8909', 'qcom,pm8916', 'qcom,pm8941', 'qcom,pm8950', 'qcom,pm8953', 'qcom,pm8994', 'qcom,pm8998', 'qcom,pma8084', 'qcom,pmd9635', 'qcom,pmi8950', 'qcom,pmi8962', 'qcom,pmi8994', 'qcom,pmi8998', 'qcom,pmk8002', 'qcom,pmk8350', 'qcom,pmm8155au', 'qcom,pmp8074', 'qcom,pmr735a', 'qcom,pmr735b', 'qcom,pms405', 'qcom,pmx55', 'qcom,pmx65', 'qcom,smb2351']
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/qcom,snps-eusb2-repeater.example.dtb: pmic@7: 'usb-repeater@fd00' does not match any of the regexes: '(.*)?(wled|leds)@[0-9a-f]+$', '^adc-tm@[0-9a-f]+$', '^adc@[0-9a-f]+$', '^audio-codec@[0-9a-f]+$', '^mpps@[0-9a-f]+$', '^rtc@[0-9a-f]+$', '^temp-alarm@[0-9a-f]+$', '^vibrator@[0-9a-f]+$', 'extcon@[0-9a-f]+$', 'gpio(s)?@[0-9a-f]+$', 'pinctrl-[0-9]+', 'pon@[0-9a-f]+$', 'pwm@[0-9a-f]+$'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
Documentation/devicetree/bindings/usb/qcom,snps-eusb2-repeater.example.dtb:0:0: /example-0/pmic@7: failed to match any schema with compatible: ['qcom,pm8550', 'qcom,spmi-pmic']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.