From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>

Add bindings for Xilinx ZynqMP OCM controller.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Co-developed-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../xlnx,zynqmp-ocmc-1.0.yaml                 | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml

diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml
new file mode 100644
index 000000000000..ca9fc747bf4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynqmp OCM(On-Chip Memory) Controller
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+  - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
+
+description: |
+  The OCM supports 64-bit wide ECC functionality to detect multi-bit errors
+  and recover from a single-bit memory fault.On a write, if all bytes are
+  being written, the ECC is generated and written into the ECC RAM along with
+  the write-data that is written into the data RAM. If one or more bytes are
+  not written, then the read operation results in an correctable error or
+  uncorrectable error.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-ocmc-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    memory-controller@ff960000 {
+      compatible = "xlnx,zynqmp-ocmc-1.0";
+      reg = <0xff960000 0x1000>;
+      interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+    };
-- 
2.25.1

On 02/11/2022 08:06, Sai Krishna Potthuri wrote:
> From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> 
> Add bindings for Xilinx ZynqMP OCM controller.
> 
> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> Co-developed-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
> Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Use subject prefixes matching the subsystem (git log --oneline -- ...).

Subsystem is memory-controllers.

Drop redundant, second "bindings" (so "bindings for").

With changes above my tag can stay.

Best regards,
Krzysztof

On 02/11/2022 08:06, Sai Krishna Potthuri wrote:
> From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> 
> Add bindings for Xilinx ZynqMP OCM controller.
> 

Applied with fixes in subject - please use prefixes matching the
subsystem (memory-controllers) and do not put twice "bindings" (one is
enough).

Best regards,
Krzysztof

On Wed, 2 Nov 2022 12:36:54 +0530, Sai Krishna Potthuri wrote:
> From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> 
> Add bindings for Xilinx ZynqMP OCM controller.
> 
> 

Applied, thanks!

[1/2] dt-bindings: edac: Add bindings for Xilinx ZynqMP OCM
      https://git.kernel.org/krzk/linux-mem-ctrl/c/efd1547170c3b153f161c293fc11b9fe2f1ece01

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>