This is the start of the stable review cycle for the 5.10.153 release.
There are 91 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.153-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.10.153-rc1

Lukas Wunner <lukas@wunner.de>
    serial: Deassert Transmit Enable on probe in driver-specific way

Lino Sanfilippo <LinoSanfilippo@gmx.de>
    serial: core: move RS485 configuration tasks from drivers into core

Biju Das <biju.das.jz@bp.renesas.com>
    can: rcar_canfd: rcar_canfd_handle_global_receive(): fix IRQ storm on global FIFO receive

Anshuman Khandual <anshuman.khandual@arm.com>
    arm64/kexec: Test page size support with new TGRAN range values

James Morse <james.morse@arm.com>
    arm64/mm: Fix __enable_mmu() for new TGRAN range values

Yu Kuai <yukuai3@huawei.com>
    scsi: sd: Revert "scsi: sd: Remove a local variable"

D Scott Phillips <scott@os.amperecomputing.com>
    arm64: Add AMPERE1 to the Spectre-BHB affected list

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: enetc: survive memory pressure without crashing

Suresh Devarakonda <ramad@nvidia.com>
    net/mlx5: Fix crash during sync firmware reset

Tariq Toukan <tariqt@nvidia.com>
    net/mlx5: Fix possible use-after-free in async command interface

Hyong Youb Kim <hyonkim@cisco.com>
    net/mlx5e: Do not increment ESN when updating IPsec ESN state

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    nh: fix scope used to find saddr when adding non gw nh

Yang Yingliang <yangyingliang@huawei.com>
    net: ehea: fix possible memory leak in ehea_register_port()

Aaron Conole <aconole@redhat.com>
    openvswitch: switch from WARN to pr_warn

Takashi Iwai <tiwai@suse.de>
    ALSA: aoa: Fix I2S device accounting

Yang Yingliang <yangyingliang@huawei.com>
    ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()

Juergen Borleis <jbe@pengutronix.de>
    net: fec: limit register access on i.MX6UL

Sudeep Holla <sudeep.holla@arm.com>
    PM: domains: Fix handling of unavailable/disabled idle states

Yang Yingliang <yangyingliang@huawei.com>
    net: ksz884x: fix missing pci_disable_device() on error in pcidev_init()

Slawomir Laba <slawomirx.laba@intel.com>
    i40e: Fix flow-type by setting GL_HASH_INSET registers

Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
    i40e: Fix VF hang when reset is triggered on another VF

Slawomir Laba <slawomirx.laba@intel.com>
    i40e: Fix ethtool rx-flow-hash setting for X722

Eric Dumazet <edumazet@google.com>
    ipv6: ensure sane device mtu in tunnels

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: vivid: set num_in/outputs to 0 if not supported

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced'

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: v4l2-dv-timings: add sanity checks for blanking values

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: vivid: dev->bitmap_cap wasn't freed in all cases

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: vivid: s_fbuf: add more sanity checks

Mario Limonciello <mario.limonciello@amd.com>
    PM: hibernate: Allow hybrid sleep to work with s2idle

Dongliang Mu <dzm91@hust.edu.cn>
    can: mcp251x: mcp251x_can_probe(): add missing unregister_candev() in error path

Dongliang Mu <dzm91@hust.edu.cn>
    can: mscan: mpc5xxx: mpc5xxx_can_probe(): add missing put_clock() in error path

Neal Cardwell <ncardwell@google.com>
    tcp: fix indefinite deferral of RTO with SACK reneging

Lu Wei <luwei32@huawei.com>
    tcp: fix a signed-integer-overflow bug in tcp_add_backlog()

Eric Dumazet <edumazet@google.com>
    tcp: minor optimization in tcp_add_backlog()

Zhang Changzhong <zhangchangzhong@huawei.com>
    net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY

Zhengchao Shao <shaozhengchao@huawei.com>
    net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed

Eric Dumazet <edumazet@google.com>
    kcm: annotate data-races around kcm->rx_wait

Eric Dumazet <edumazet@google.com>
    kcm: annotate data-races around kcm->rx_psock

Íñigo Huguet <ihuguet@redhat.com>
    atlantic: fix deadlock at aq_nic_stop

Raju Rangoju <Raju.Rangoju@amd.com>
    amd-xgbe: add the bit rate quirk for Molex cables

Raju Rangoju <Raju.Rangoju@amd.com>
    amd-xgbe: fix the SFP compliance codes check for DAC cables

Chen Zhongjin <chenzhongjin@huawei.com>
    x86/unwind/orc: Fix unreliable stack dump with gcov

Zhengchao Shao <shaozhengchao@huawei.com>
    net: hinic: fix the issue of double release MBOX callback of VF

Zhengchao Shao <shaozhengchao@huawei.com>
    net: hinic: fix the issue of CMDQ memory leaks

Zhengchao Shao <shaozhengchao@huawei.com>
    net: hinic: fix memory leak when reading function table

Zhengchao Shao <shaozhengchao@huawei.com>
    net: hinic: fix incorrect assignment issue in hinic_set_interrupt_cfg()

Yang Yingliang <yangyingliang@huawei.com>
    net: netsec: fix error handling in netsec_register_mdio()

Xin Long <lucien.xin@gmail.com>
    tipc: fix a null-ptr-deref in tipc_topsrv_accept

Maxim Levitsky <mlevitsk@redhat.com>
    perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()

Yang Yingliang <yangyingliang@huawei.com>
    ALSA: ac97: fix possible memory leak in snd_ac97_dev_register()

Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
    ASoC: qcom: lpass-cpu: Mark HDMI TX parity register as volatile

Randy Dunlap <rdunlap@infradead.org>
    arc: iounmap() arg is volatile

Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
    ASoC: qcom: lpass-cpu: mark HDMI TX registers as volatile

Nathan Huckleberry <nhuck@google.com>
    drm/msm: Fix return type of mdp4_lvds_connector_mode_valid

Alexander Stein <alexander.stein@ew.tq-group.com>
    media: v4l2: Fix v4l2_i2c_subdev_set_name function documentation

Wei Yongjun <weiyongjun1@huawei.com>
    net: ieee802154: fix error return code in dgram_bind()

Rik van Riel <riel@surriel.com>
    mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages

Yuanzheng Song <songyuanzheng@huawei.com>
    mm/memory: add non-anonymous page check in the copy_present_page()

M. Vefa Bicakci <m.v.b@runbox.com>
    xen/gntdev: Prevent leaking grants

Jan Beulich <jbeulich@suse.com>
    Xen/gntdev: don't ignore kernel unmapping error

Heiko Carstens <hca@linux.ibm.com>
    s390/pci: add missing EX_TABLE entries to __pcistg_mio_inuser()/__pcilg_mio_inuser()

Heiko Carstens <hca@linux.ibm.com>
    s390/futex: add missing EX_TABLE entry to __futex_atomic_op()

Adrian Hunter <adrian.hunter@intel.com>
    perf auxtrace: Fix address filter symbol name match for modules

Christian A. Ehrhardt <lk@c--e.de>
    kernfs: fix use-after-free in __kernfs_remove

William Breathitt Gray <william.gray@linaro.org>
    counter: microchip-tcb-capture: Handle Signal1 read and Synapse

Matthew Ma <mahongwei@zeku.com>
    mmc: core: Fix kernel panic when remove non-standard SDIO card

Brian Norris <briannorris@chromium.org>
    mmc: sdhci_am654: 'select', not 'depends' REGMAP_MMIO

Johan Hovold <johan+linaro@kernel.org>
    drm/msm/dp: fix IRQ lifetime

Johan Hovold <johan+linaro@kernel.org>
    drm/msm/hdmi: fix memory corruption with too many bridges

Johan Hovold <johan+linaro@kernel.org>
    drm/msm/dsi: fix memory corruption with too many bridges

Manish Rangankar <mrangankar@marvell.com>
    scsi: qla2xxx: Use transport-defined speed mask for supported_speeds

Miquel Raynal <miquel.raynal@bootlin.com>
    mac802154: Fix LQI recording

Bernd Edlinger <bernd.edlinger@hotmail.de>
    exec: Copy oldsighand->action under spin-lock

Li Zetao <lizetao1@huawei.com>
    fs/binfmt_elf: Fix memory leak in load_elf_binary()

Hyunwoo Kim <imv4bel@gmail.com>
    fbdev: smscufx: Fix several use-after-free bugs

Cosmin Tanislav <cosmin.tanislav@analog.com>
    iio: temperature: ltc2983: allocate iio channels once

Shreeya Patel <shreeya.patel@collabora.com>
    iio: light: tsl2583: Fix module unloading

Matti Vaittinen <mazziesaccount@gmail.com>
    tools: iio: iio_utils: fix digit calculation

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: Remove device endpoints from bandwidth list when freeing the device

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: Add quirk to reset host back to default state at shutdown

Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
    mtd: rawnand: marvell: Use correct logic for nand-keep-config

Jens Glathe <jens.glathe@oldschoolsolutions.biz>
    usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller

Justin Chen <justinpopo6@gmail.com>
    usb: bdc: change state when port disconnected

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: gadget: Don't set IMI for no_interrupt

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: gadget: Stop processing more requests on IMI

Hannu Hartikainen <hannu@hrtk.in>
    USB: add RESET_RESUME quirk for NVIDIA Jetson devices in RCM

Jason A. Donenfeld <Jason@zx2c4.com>
    ALSA: rme9652: use explicitly signed char

Jason A. Donenfeld <Jason@zx2c4.com>
    ALSA: au88x0: use explicitly signed char

Steven Rostedt (Google) <rostedt@goodmis.org>
    ALSA: Use del_timer_sync() before freeing timer

Anssi Hannula <anssi.hannula@bitwise.fi>
    can: kvaser_usb: Fix possible completions during init_completion

Yang Yingliang <yangyingliang@huawei.com>
    can: j1939: transport: j1939_session_skb_drop_old(): spin_unlock_irqrestore() before kfree_skb()


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arc/include/asm/io.h                          |   2 +-
 arch/arc/mm/ioremap.c                              |   2 +-
 arch/arm64/include/asm/cpufeature.h                |   9 +-
 arch/arm64/include/asm/cputype.h                   |   4 +
 arch/arm64/include/asm/sysreg.h                    |  36 +++++---
 arch/arm64/kernel/head.S                           |   6 +-
 arch/arm64/kernel/proton-pack.c                    |   6 ++
 arch/arm64/kvm/reset.c                             |  10 ++-
 arch/s390/include/asm/futex.h                      |   3 +-
 arch/s390/pci/pci_mmio.c                           |   8 +-
 arch/x86/events/intel/lbr.c                        |   2 +-
 arch/x86/kernel/unwind_orc.c                       |   2 +-
 drivers/base/power/domain.c                        |   4 +
 drivers/counter/microchip-tcb-capture.c            |  18 +++-
 drivers/firmware/efi/libstub/arm64-stub.c          |   2 +-
 .../gpu/drm/msm/disp/mdp4/mdp4_lvds_connector.c    |   5 +-
 drivers/gpu/drm/msm/dp/dp_display.c                |   2 +-
 drivers/gpu/drm/msm/dsi/dsi.c                      |   6 ++
 drivers/gpu/drm/msm/hdmi/hdmi.c                    |   5 ++
 drivers/iio/light/tsl2583.c                        |   2 +-
 drivers/iio/temperature/ltc2983.c                  |  13 ++-
 drivers/media/test-drivers/vivid/vivid-core.c      |  38 +++++++-
 drivers/media/test-drivers/vivid/vivid-core.h      |   2 +
 drivers/media/test-drivers/vivid/vivid-vid-cap.c   |  27 ++++--
 drivers/media/v4l2-core/v4l2-dv-timings.c          |  14 +++
 drivers/mmc/core/sdio_bus.c                        |   3 +-
 drivers/mmc/host/Kconfig                           |   3 +-
 drivers/mtd/nand/raw/marvell_nand.c                |   2 +-
 drivers/net/can/mscan/mpc5xxx_can.c                |   8 +-
 drivers/net/can/rcar/rcar_canfd.c                  |   6 +-
 drivers/net/can/spi/mcp251x.c                      |   5 +-
 drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c  |   4 +-
 drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c   |   4 +-
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c        |  17 ++--
 drivers/net/ethernet/aquantia/atlantic/aq_macsec.c |  96 +++++++++++++++-----
 drivers/net/ethernet/aquantia/atlantic/aq_nic.h    |   2 +
 drivers/net/ethernet/freescale/enetc/enetc.c       |   5 ++
 drivers/net/ethernet/freescale/fec_main.c          |  46 +++++++++-
 drivers/net/ethernet/huawei/hinic/hinic_debugfs.c  |  18 ++--
 drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c  |   2 +-
 drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c   |   2 +-
 drivers/net/ethernet/huawei/hinic/hinic_sriov.c    |   1 -
 drivers/net/ethernet/ibm/ehea/ehea_main.c          |   1 +
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c     | 100 ++++++++++++---------
 drivers/net/ethernet/intel/i40e/i40e_type.h        |   4 +
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |  43 ++++++---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |   1 +
 drivers/net/ethernet/lantiq_etop.c                 |   1 -
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c      |  10 +--
 .../ethernet/mellanox/mlx5/core/en_accel/ipsec.c   |   3 -
 drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c |   6 +-
 drivers/net/ethernet/micrel/ksz884x.c              |   2 +-
 drivers/net/ethernet/socionext/netsec.c            |   2 +
 drivers/scsi/qla2xxx/qla_attr.c                    |  28 +++++-
 drivers/scsi/sd.c                                  |   3 +-
 drivers/tty/serial/8250/8250_omap.c                |   3 +
 drivers/tty/serial/8250/8250_pci.c                 |   9 +-
 drivers/tty/serial/8250/8250_port.c                |  12 +--
 drivers/tty/serial/fsl_lpuart.c                    |   8 +-
 drivers/tty/serial/imx.c                           |   8 +-
 drivers/tty/serial/serial_core.c                   |  61 ++++++++++---
 drivers/usb/core/quirks.c                          |   9 ++
 drivers/usb/dwc3/gadget.c                          |   8 +-
 drivers/usb/gadget/udc/bdc/bdc_udc.c               |   1 +
 drivers/usb/host/xhci-mem.c                        |  20 +++--
 drivers/usb/host/xhci-pci.c                        |  12 ++-
 drivers/usb/host/xhci.c                            |  10 ++-
 drivers/usb/host/xhci.h                            |   1 +
 drivers/video/fbdev/smscufx.c                      |  55 ++++++------
 drivers/xen/gntdev.c                               |  30 +++++--
 fs/binfmt_elf.c                                    |   3 +-
 fs/exec.c                                          |   4 +-
 fs/kernfs/dir.c                                    |   5 +-
 include/linux/mlx5/driver.h                        |   2 +-
 include/media/v4l2-common.h                        |   3 +-
 include/uapi/linux/videodev2.h                     |   3 +-
 kernel/power/hibernate.c                           |   2 +-
 mm/hugetlb.c                                       |   2 +-
 mm/memory.c                                        |  11 +++
 net/can/j1939/transport.c                          |   4 +-
 net/core/net_namespace.c                           |   7 ++
 net/ieee802154/socket.c                            |   4 +-
 net/ipv4/nexthop.c                                 |   2 +-
 net/ipv4/tcp_input.c                               |   3 +-
 net/ipv4/tcp_ipv4.c                                |   7 +-
 net/ipv6/ip6_gre.c                                 |  12 +--
 net/ipv6/ip6_tunnel.c                              |  11 +--
 net/ipv6/sit.c                                     |   8 +-
 net/kcm/kcmsock.c                                  |  23 +++--
 net/mac802154/rx.c                                 |   5 +-
 net/openvswitch/datapath.c                         |   3 +-
 net/tipc/topsrv.c                                  |  16 +++-
 sound/aoa/soundbus/i2sbus/core.c                   |   7 +-
 sound/pci/ac97/ac97_codec.c                        |   1 +
 sound/pci/au88x0/au88x0.h                          |   6 +-
 sound/pci/au88x0/au88x0_core.c                     |   2 +-
 sound/pci/rme9652/hdsp.c                           |  26 +++---
 sound/pci/rme9652/rme9652.c                        |  22 ++---
 sound/soc/qcom/lpass-cpu.c                         |  10 +++
 sound/synth/emux/emux.c                            |   7 +-
 tools/iio/iio_utils.c                              |   4 +
 tools/perf/util/auxtrace.c                         |  10 ++-
 103 files changed, 805 insertions(+), 337 deletions(-)

Hi Greg,

On Wed, Nov 02, 2022 at 03:32:43AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.153 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.

Build test (gcc version 11.3.1 20221016):
mips: 63 configs -> no failure
arm: 104 configs -> no failure
arm64: 3 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]

[1]. https://openqa.qa.codethink.co.uk/tests/2091
[2]. https://openqa.qa.codethink.co.uk/tests/2094


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

-- 
Regards
Sudip

On Wed, 2 Nov 2022 at 08:42, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.10.153 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.153-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

NOTE:
1)
Build failures: Perf on arm64/i386/x86 on 5.4/5.10/5.15, not on arm32.
perf build started to pass on stable-rc 6.0 and mainline and next
master branches.

Build error:
util/annotate.c: In function 'symbol__disassemble_bpf':
util/annotate.c:1739:9: error: too few arguments to function
'init_disassemble_info'
 1739 |         init_disassemble_info(&info, s,
      |         ^~~~~~~~~~~~~~~~~~~~~
In file included from util/annotate.c:1692:
/usr/include/dis-asm.h:472:13: note: declared here
  472 | extern void init_disassemble_info (struct disassemble_info
*dinfo, void *stream,
      |             ^~~~~~~~~~~~~~~~~~~~~
make[4]: *** [/    tools/build/Makefile.build:97:
/home/tuxbuild/.cache/tuxmake/builds/1/build/util/annotate.o] Error 1

Build log link,
https://builds.tuxbuild.com/2GyMi25XnyDaaKJ170L0VWShkT9/

2)
Following kernel warning always noticed on x86_64 with list of
kselftest merge configs enabled.

This is not a regression this warning has been occuring from the day
we have enabled
kselfest runs on stable-rc 5.10.

[    0.256413] RETBleed: Mitigation: untrained return thunk
[    0.257416] Spectre V2 : mitigation: Enabling conditional Indirect
Branch Prediction Barrier
[    0.258415] Speculative Store Bypass: Mitigation: Speculative Store
Bypass disabled via prctl and seccomp
[    0.269751] ------------[ cut here ]------------
[    0.270425] missing return thunk:
lkdtm_rodata_do_nothing+0x0/0x10-lkdtm_rodata_do_nothing+0x5/0x10: e9
00 00 00 00
[    0.270447] WARNING: CPU: 0 PID: 0 at
arch/x86/kernel/alternative.c:712 apply_returns+0x1ca/0x1f0
[    0.272414] Modules linked in:
[    0.273419] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.153-rc1 #1
[    0.274416] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.12.0-1 04/01/2014
[    0.275417] RIP: 0010:apply_returns+0x1ca/0x1f0
[    0.276416] Code: 05 02 00 0f 85 0d ff ff ff 4d 89 e0 b9 05 00 00
00 4c 89 fa 4c 89 e6 48 c7 c7 30 f3 e4 ae c6 05 f7 1f 05 02 01 e8 0b
64 08 01 <0f> 0b e9 e5 fe ff ff c7 45 c1 cc cc cc cc c7 44 10 fc cc cc
cc cc
[    0.277414] RSP: 0000:ffffffffaf203d98 EFLAGS: 00010282
[    0.278414] RAX: 0000000000000000 RBX: ffffffffaf7941f8 RCX: 0000000000000000
[    0.279414] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffad64d062
[    0.280414] RBP: ffffffffaf203e60 R08: 0000000000000001 R09: 0000000000000001
[    0.281413] R10: ffffffffaf2998e0 R11: ffffffffaf2998e0 R12: ffffffffaeaf8c60
[    0.282414] R13: ffffffffaf7b2f18 R14: cccccccccccccccc R15: ffffffffaeaf8c65
[    0.283416] FS:  0000000000000000(0000) GS:ffff8a53fbc00000(0000)
knlGS:0000000000000000
[    0.284416] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.285414] CR2: ffff8a53fffff000 CR3: 0000000021e26000 CR4: 00000000003506f0
[    0.286415] Call Trace:
[    0.286787]  ? apply_retpolines+0x5e/0x2a0
[    0.287421]  ? _cond_resched+0x1a/0x60
[    0.287987]  alternative_instructions+0x7d/0x13f
[    0.288416]  check_bugs+0xeed/0xf2e
[    0.289418]  start_kernel+0x515/0x54c
[    0.289968]  x86_64_start_reservations+0x24/0x2a
[    0.290415]  x86_64_start_kernel+0x9d/0xa5
[    0.291417]  secondary_startup_64_no_verify+0xc2/0xcb
[    0.292174] irq event stamp: 1709
[    0.292418] hardirqs last  enabled at (1721): [<ffffffffad64d062>]
console_unlock+0x502/0x5e0
[    0.293415] hardirqs last disabled at (1732): [<ffffffffad64cfbd>]
console_unlock+0x45d/0x5e0
[    0.294417] softirqs last  enabled at (1742): [<ffffffffad5cee36>]
irq_enter_rcu+0x76/0x80
[    0.295415] softirqs last disabled at (1753): [<ffffffffad5cee1b>]
irq_enter_rcu+0x5b/0x80
[    0.296418] ---[ end trace 665160b92b6d6ceb ]---

https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.152-92-g2f6e4754098c/testrun/12812412/suite/log-parser-boot/tests/
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.152-92-g2f6e4754098c/testrun/12812412/suite/log-parser-boot/test/check-kernel-exception/log

## Build
* kernel: 5.10.153-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.10.y
* git commit: 2f6e4754098c797c9befbb1c13ea97e89dbd665f
* git describe: v5.10.152-92-g2f6e4754098c
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.152-92-g2f6e4754098c

## No Test Regressions (compared to v5.10.152)

## No Metric Regressions (compared to v5.10.152)

## No Test Fixes (compared to v5.10.152)

## No Metric Fixes (compared to v5.10.152)

## Test result summary
total: 148664, pass: 125743, fail: 3265, skip: 19222, xfail: 434

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 149 total, 148 passed, 1 failed
* arm64: 47 total, 45 passed, 2 failed
* i386: 37 total, 35 passed, 2 failed
* mips: 27 total, 27 passed, 0 failed
* parisc: 6 total, 6 passed, 0 failed
* powerpc: 28 total, 23 passed, 5 failed
* riscv: 12 total, 12 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 12 total, 12 passed, 0 failed
* sparc: 6 total, 6 passed, 0 failed
* x86_64: 40 total, 38 passed, 2 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

> This is the start of the stable review cycle for the 5.10.153 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.
>


Compiled and booted on my x86_64 and ARM64 test systems. No errors or
regressions.

Tested-by: Allen Pais <apais@linux.microsoft.com>

Thanks.

On Wed, Nov 02, 2022 at 03:32:43AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.153 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 163 pass: 163 fail: 0
Qemu test results:
	total: 475 pass: 475 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

On 11/1/22 19:32, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.153 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.153-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Hi1

> This is the start of the stable review cycle for the 5.10.153 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

On Wed, Nov 02, 2022 at 03:32:43AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.153 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.

Hi Greg,

5.10.153-rc1 tested.

Run tested on:
- Intel Skylake x86_64 (nuc6 i5-6260U)

In addition - build tested for:
- Allwinner A64
- Allwinner H3
- Allwinner H5
- Allwinner H6
- Rockchip RK3288
- Rockchip RK3328
- Rockchip RK3399pro

Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
--
Rudi

On 2022/11/2 10:32, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.153 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.153-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
> -------------
Tested on arm64 and x86 for  5.10.153-rc1,

Kernel 
repo:https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version:  5.10.153-rc1
Commit: 6d20868ac152a5a55c2b2c345683e402b32611d6
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9023
passed: 9023
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9023
passed: 9023
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <hulkrobot@huawei.com>
>
>

On Wed, 02 Nov 2022 03:32:43 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.153 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 04 Nov 2022 02:20:38 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.153-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.10:
    11 builds:	11 pass, 0 fail
    28 boots:	28 pass, 0 fail
    75 tests:	75 pass, 0 fail

Linux version:	5.10.153-rc1-g2f6e4754098c
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon