From: Yassine Oudjana <y.oudjana@protonmail.com>

Change "subnodes" to "subnode" in subnode description for better grammatical
accuracy, capitalize pinmux description, wrap all descriptions at 80 characters,
and remove literal style indicators from descriptions that don't need their new
lines preserved.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
---
 .../pinctrl/mediatek,mt6779-pinctrl.yaml      | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index 23b1f7867afb..70e4ffa2d897 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -118,11 +118,12 @@ patternProperties:
     patternProperties:
       '^pins':
         type: object
-        description: |
-          A pinctrl node should contain at least one subnodes representing the
+        description:
+          A pinctrl node should contain at least one subnode representing the
           pinctrl groups available on the machine. Each subnode will list the
-          pins it needs, and how they should be configured, with regard to muxer
-          configuration, pullups, drive strength, input enable/disable and input schmitt.
+          pins it needs, and how they should be configured, with regard to
+          muxer configuration, pullups, drive strength, input enable/disable
+          and input schmitt.
         allOf:
           - $ref: pinmux-node.yaml
           - $ref: pincfg-node.yaml
@@ -130,9 +131,9 @@ patternProperties:
         properties:
           pinmux:
             description:
-              integer array, represents gpio pin number and mux setting.
-              Supported pin number and mux varies for different SoCs, and are defined
-              as macros in boot/dts/<soc>-pinfunc.h directly.
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in boot/dts/<soc>-pinfunc.h directly.
 
           bias-disable: true
 
@@ -141,7 +142,7 @@ patternProperties:
               - type: boolean
               - enum: [100, 101, 102, 103]
                 description: Pull up PUPD/R0/R1 type define value.
-            description: |
+            description:
               For normal pull up type, it is not necessary to specify R1R0
               values; When pull up type is PUPD/R0/R1, adding R1R0 defines
               will set different resistance values.
@@ -151,7 +152,7 @@ patternProperties:
               - type: boolean
               - enum: [100, 101, 102, 103]
                 description: Pull down PUPD/R0/R1 type define value.
-            description: |
+            description:
               For normal pull down type, it is not necessary to specify R1R0
               values; When pull down type is PUPD/R0/R1, adding R1R0 defines
               will set different resistance values.
-- 
2.38.1

On 28/10/2022 11:35, Yassine Oudjana wrote:
> From: Yassine Oudjana <y.oudjana@protonmail.com>
> 
> Change "subnodes" to "subnode" in subnode description for better grammatical
> accuracy, capitalize pinmux description, wrap all descriptions at 80 characters,
> and remove literal style indicators from descriptions that don't need their new
> lines preserved.
> 
> Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
> ---

I propose to squash it with the one changing description here.

Best regards,
Krzysztof

On Fri, Oct 28 2022 at 15:58:30 -04:00:00, Krzysztof Kozlowski 
<krzysztof.kozlowski@linaro.org> wrote:
> On 28/10/2022 11:35, Yassine Oudjana wrote:
>>  From: Yassine Oudjana <y.oudjana@protonmail.com>
>> 
>>  Change "subnodes" to "subnode" in subnode description for better 
>> grammatical
>>  accuracy, capitalize pinmux description, wrap all descriptions at 
>> 80 characters,
>>  and remove literal style indicators from descriptions that don't 
>> need their new
>>  lines preserved.
>> 
>>  Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
>>  ---
> 
> I propose to squash it with the one changing description here.

You mean patch 6 "dt-bindings: pinctrl: mediatek,pinctrl-mt6795: 
Improve interrupts description"? If yes, would that mean improving 
descriptions in mediatek,pinctrl-mt6795.yaml then pulling them into 
mt6779?