Thermal Monitoring block ADC5 (TM5) in PMK8280 can be used to monitor the
temperature from slave PMICs like PM8280.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index 32086d5edd0d..d55f0a9cea61 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -86,6 +86,16 @@ pmk8280_vadc: adc@3100 {
 			#io-channel-cells = <1>;
 			io-channel-ranges;
 		};
+
+		pmk8280_adc_tm: adc-tm@3400 {
+			compatible = "qcom,spmi-adc-tm5-gen2";
+			reg = <0x3400>;
+			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
+		};
 	};
 
 	pmc8280_1: pmic@1 {
-- 
2.25.1

On 27/10/2022 02:30, Manivannan Sadhasivam wrote:
> Thermal Monitoring block ADC5 (TM5) in PMK8280 can be used to monitor the
> temperature from slave PMICs like PM8280.
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof