Don't hardcode the ms5611 SPI speed, limit it instead.
Signed-off-by: Mitja Spes <mitja@lxnav.com>
---
drivers/iio/pressure/ms5611_spi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c
index 432e912096f4..a0a7205c9c3a 100644
--- a/drivers/iio/pressure/ms5611_spi.c
+++ b/drivers/iio/pressure/ms5611_spi.c
@@ -91,7 +91,7 @@ static int ms5611_spi_probe(struct spi_device *spi)
spi_set_drvdata(spi, indio_dev);
spi->mode = SPI_MODE_0;
- spi->max_speed_hz = 20000000;
+ spi->max_speed_hz = min(spi->max_speed_hz, 20000000U);
spi->bits_per_word = 8;
ret = spi_setup(spi);
if (ret < 0)
--
2.34.1Hi Mitja, On Fri, Oct 21, 2022 at 03:58:21PM +0200, Mitja Spes wrote: > Don't hardcode the ms5611 SPI speed, limit it instead. > > Signed-off-by: Mitja Spes <mitja@lxnav.com> > --- > drivers/iio/pressure/ms5611_spi.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c > index 432e912096f4..a0a7205c9c3a 100644 > --- a/drivers/iio/pressure/ms5611_spi.c > +++ b/drivers/iio/pressure/ms5611_spi.c > @@ -91,7 +91,7 @@ static int ms5611_spi_probe(struct spi_device *spi) > spi_set_drvdata(spi, indio_dev); > > spi->mode = SPI_MODE_0; > - spi->max_speed_hz = 20000000; > + spi->max_speed_hz = min(spi->max_speed_hz, 20000000U); max_speed_hz is a limit, and the max frequency the ms5611 support is 20MHz. Best regards, Marcus Folkesson
On Fri, 21 Oct 2022 17:32:21 +0200 Marcus Folkesson <marcus.folkesson@gmail.com> wrote: > Hi Mitja, > > On Fri, Oct 21, 2022 at 03:58:21PM +0200, Mitja Spes wrote: > > Don't hardcode the ms5611 SPI speed, limit it instead. > > > > Signed-off-by: Mitja Spes <mitja@lxnav.com> > > --- > > drivers/iio/pressure/ms5611_spi.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c > > index 432e912096f4..a0a7205c9c3a 100644 > > --- a/drivers/iio/pressure/ms5611_spi.c > > +++ b/drivers/iio/pressure/ms5611_spi.c > > @@ -91,7 +91,7 @@ static int ms5611_spi_probe(struct spi_device *spi) > > spi_set_drvdata(spi, indio_dev); > > > > spi->mode = SPI_MODE_0; > > - spi->max_speed_hz = 20000000; > > + spi->max_speed_hz = min(spi->max_speed_hz, 20000000U); > > max_speed_hz is a limit, and the max frequency the ms5611 support is > 20MHz. Hi Marcus, I'm not following what you are commenting on.. Perhaps give more detail? Thanks, Jonathan > > Best regards, > Marcus Folkesson
Hi Jonathan, On Sun, Oct 23, 2022 at 12:12:22PM +0100, Jonathan Cameron wrote: > On Fri, 21 Oct 2022 17:32:21 +0200 > Marcus Folkesson <marcus.folkesson@gmail.com> wrote: > > > Hi Mitja, > > > > On Fri, Oct 21, 2022 at 03:58:21PM +0200, Mitja Spes wrote: > > > Don't hardcode the ms5611 SPI speed, limit it instead. > > > > > > Signed-off-by: Mitja Spes <mitja@lxnav.com> > > > --- > > > drivers/iio/pressure/ms5611_spi.c | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c > > > index 432e912096f4..a0a7205c9c3a 100644 > > > --- a/drivers/iio/pressure/ms5611_spi.c > > > +++ b/drivers/iio/pressure/ms5611_spi.c > > > @@ -91,7 +91,7 @@ static int ms5611_spi_probe(struct spi_device *spi) > > > spi_set_drvdata(spi, indio_dev); > > > > > > spi->mode = SPI_MODE_0; > > > - spi->max_speed_hz = 20000000; > > > + spi->max_speed_hz = min(spi->max_speed_hz, 20000000U); > > > > max_speed_hz is a limit, and the max frequency the ms5611 support is > > 20MHz. > Hi Marcus, > > I'm not following what you are commenting on.. Perhaps give more > detail? Sorry for being unclear. However, I must have thought wrong, this is good as it takes the speedlimit set in e.g. devicetree into account. > > Thanks, > > Jonathan > > > > > Best regards, > > Marcus Folkesson > Best regards, Marcus Folkesson
On Fri, 21 Oct 2022 17:32:21 +0200 Marcus Folkesson <marcus.folkesson@gmail.com> wrote: > Hi Mitja, > > On Fri, Oct 21, 2022 at 03:58:21PM +0200, Mitja Spes wrote: > > Don't hardcode the ms5611 SPI speed, limit it instead. > > > > Signed-off-by: Mitja Spes <mitja@lxnav.com> Please give a fixes tag for this one as well. The driver should never have been doing this. Jonathan > > --- > > drivers/iio/pressure/ms5611_spi.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c > > index 432e912096f4..a0a7205c9c3a 100644 > > --- a/drivers/iio/pressure/ms5611_spi.c > > +++ b/drivers/iio/pressure/ms5611_spi.c > > @@ -91,7 +91,7 @@ static int ms5611_spi_probe(struct spi_device *spi) > > spi_set_drvdata(spi, indio_dev); > > > > spi->mode = SPI_MODE_0; > > - spi->max_speed_hz = 20000000; > > + spi->max_speed_hz = min(spi->max_speed_hz, 20000000U); > > max_speed_hz is a limit, and the max frequency the ms5611 support is > 20MHz. > > Best regards, > Marcus Folkesson
On Sun, Oct 23, 2022 at 1:09 PM Jonathan Cameron <jic23@kernel.org> wrote:
> Please give a fixes tag for this one as well.
> The driver should never have been doing this.
Fixes: c0644160a8b5 ("iio: pressure: add support for MS5611 pressure
and temperature sensor")
Kind regards,
Mitja
© 2016 - 2026 Red Hat, Inc.