mtd: spi-nor: micron-st: Enable locking for n25q256ax1

[PATCH] mtd: spi-nor: micron-st: Enable locking for n25q256ax1

Posted by Eliav Farber 3 years, 5 months ago

n25q256ax1 [1] uses the 4 bit Block Protection scheme and supports
Top/Bottom protection via the BP and TB bits of the Status Register.
BP3 is located in bit 6 of the Status Register.
Tested on n25q256ax1.

[1] https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_256mb_3v.pdf

Signed-off-by: Eliav Farber <farbere@amazon.com>
---
 drivers/mtd/spi-nor/micron-st.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index 3c9681a3f7a3..7cf5fbb28f99 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -206,6 +206,8 @@ static const struct flash_info st_nor_parts[] = {
 		MFR_FLAGS(USE_FSR)
 	},
 	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+		      SPI_NOR_BP3_SR_BIT6)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
 		MFR_FLAGS(USE_FSR)
 	},
-- 
2.37.1

Re: [PATCH] mtd: spi-nor: micron-st: Enable locking for n25q256ax1

Posted by Michael Walle 3 years, 5 months ago

Hi,

Am 2022-10-18 09:22, schrieb Eliav Farber:
> n25q256ax1 [1] uses the 4 bit Block Protection scheme and supports
> Top/Bottom protection via the BP and TB bits of the Status Register.
> BP3 is located in bit 6 of the Status Register.
> Tested on n25q256ax1.
> 
> [1] 
> https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_256mb_3v.pdf
> 
> Signed-off-by: Eliav Farber <farbere@amazon.com>

Looks good. But could you please dump the SFDP tables as
described in [1].

-michael

[1] 
https://lore.kernel.org/linux-mtd/4304e19f3399a0a6e856119d01ccabe0@walle.cc/