This will be used from the devicetree bindings to specify the clocks
that should be obtained from the jz4755-cgu driver.

Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
---
 .../dt-bindings/clock/ingenic,jz4755-cgu.h    | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 include/dt-bindings/clock/ingenic,jz4755-cgu.h

diff --git a/include/dt-bindings/clock/ingenic,jz4755-cgu.h b/include/dt-bindings/clock/ingenic,jz4755-cgu.h
new file mode 100644
index 000000000..1ac13d61b
--- /dev/null
+++ b/include/dt-bindings/clock/ingenic,jz4755-cgu.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) */
+/*
+ * This header provides clock numbers for the ingenic,jz4755-cgu DT binding.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_JZ4755_CGU_H__
+#define __DT_BINDINGS_CLOCK_JZ4755_CGU_H__
+
+#define JZ4755_CLK_EXT		0
+#define JZ4755_CLK_OSC32K	1
+#define JZ4755_CLK_PLL		2
+#define JZ4755_CLK_PLL_HALF	3
+#define JZ4755_CLK_EXT_HALF	4
+#define JZ4755_CLK_CCLK		5
+#define JZ4755_CLK_H0CLK	6
+#define JZ4755_CLK_PCLK		7
+#define JZ4755_CLK_MCLK		8
+#define JZ4755_CLK_H1CLK	9
+#define JZ4755_CLK_UDC		10
+#define JZ4755_CLK_LCD		11
+#define JZ4755_CLK_UART0	12
+#define JZ4755_CLK_UART1	13
+#define JZ4755_CLK_UART2	14
+#define JZ4755_CLK_DMA		15
+#define JZ4755_CLK_MMC		16
+#define JZ4755_CLK_MMC0		17
+#define JZ4755_CLK_MMC1		18
+#define JZ4755_CLK_EXT512	19
+#define JZ4755_CLK_RTC		20
+#define JZ4755_CLK_UDC_PHY	21
+#define JZ4755_CLK_I2S		22
+#define JZ4755_CLK_SPI		23
+#define JZ4755_CLK_AIC		24
+#define JZ4755_CLK_ADC		25
+#define JZ4755_CLK_TCU		26
+#define JZ4755_CLK_BCH		27
+#define JZ4755_CLK_I2C		28
+#define JZ4755_CLK_TVE		29
+#define JZ4755_CLK_CIM		30
+#define JZ4755_CLK_AUX_CPU	31
+#define JZ4755_CLK_AHB1		32
+#define JZ4755_CLK_IDCT		33
+#define JZ4755_CLK_DB		34
+#define JZ4755_CLK_ME		35
+#define JZ4755_CLK_MC		36
+#define JZ4755_CLK_TSSI		37
+#define JZ4755_CLK_IPU		38
+
+#endif /* __DT_BINDINGS_CLOCK_JZ4755_CGU_H__ */
-- 
2.36.1

On 16/10/2022 11:01, Siarhei Volkau wrote:
> This will be used from the devicetree bindings to specify the clocks
> that should be obtained from the jz4755-cgu driver.
> 
> Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
> ---
>  .../dt-bindings/clock/ingenic,jz4755-cgu.h    | 49 +++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 include/dt-bindings/clock/ingenic,jz4755-cgu.h
> 
> diff --git a/include/dt-bindings/clock/ingenic,jz4755-cgu.h b/include/dt-bindings/clock/ingenic,jz4755-cgu.h
> new file mode 100644
> index 000000000..1ac13d61b
> --- /dev/null
> +++ b/include/dt-bindings/clock/ingenic,jz4755-cgu.h
> @@ -0,0 +1,49 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) */

Why did you choose 2.0+?

Best regards,
Krzysztof

вс, 16 окт. 2022 г. в 18:32, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org>:

> Why did you choose 2.0+?

It's the first time that I need to choose a license, so it's a bit
confusing what
side effects they have, especially in that particular case.

What do you recommend?

BR,
Siarhei

On Sun, Oct 16, 2022 at 09:21:18PM +0300, Siarhei Volkau wrote:
> вс, 16 окт. 2022 г. в 18:32, Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org>:
> 
> > Why did you choose 2.0+?
> 
> It's the first time that I need to choose a license, so it's a bit
> confusing what
> side effects they have, especially in that particular case.
> 
> What do you recommend?

Are you fine with GPLv4, GPLv5? Considering they haven't been written, I 
wouldn't be.

Rob

On 16/10/2022 14:21, Siarhei Volkau wrote:
> вс, 16 окт. 2022 г. в 18:32, Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org>:
> 
>> Why did you choose 2.0+?
> 
> It's the first time that I need to choose a license, so it's a bit
> confusing what
> side effects they have, especially in that particular case.
> 
> What do you recommend?

Choice was fine, just not common so I was just wondering. You can keep
it but usually we choose what the checkpatch is asking for - so GPL-2.0
(only )or BSD-2-clause.

Best regards,
Krzysztof