Use SM6350 as fallback for GPI DMA, to indicate devices are compatible
and that drivers can bind with only one compatible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 212580316d3e..2a167412fa6a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -920,7 +920,7 @@ opp-384000000 {
 
 		gpi_dma0: dma-controller@900000 {
 			#dma-cells = <3>;
-			compatible = "qcom,sc7280-gpi-dma";
+			compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
@@ -1419,7 +1419,7 @@ uart7: serial@99c000 {
 
 		gpi_dma1: dma-controller@a00000 {
 			#dma-cells = <3>;
-			compatible = "qcom,sc7280-gpi-dma";
+			compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0 0x00a00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.34.1

On 15/10/2022 16:04, Krzysztof Kozlowski wrote:
> Use SM6350 as fallback for GPI DMA, to indicate devices are compatible
> and that drivers can bind with only one compatible.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>