1. Patchew
  2. linux
  3. [PATCH v3 0/2] *** IT6505 driver read dt properties ***
  4. View patch

[PATCH v3 1/2] dt-bindings: it6505: add properties to restrict output bandwidth

allen posted 2 patches 3 years, 6 months ago
There is a newer version of this series
[PATCH v3 1/2] dt-bindings: it6505: add properties to restrict output bandwidth
Posted by allen 3 years, 6 months ago 
From: allen chen <allen.chen@ite.com.tw>

Add properties to restrict dp output data-lanes and clock.

Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
---
 .../bindings/display/bridge/ite,it6505.yaml          | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
index 833d11b2303a..f5482a614d05 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
@@ -52,6 +52,16 @@ properties:
     maxItems: 1
     description: extcon specifier for the Power Delivery
 
+  ite,dp-output-data-lane-count:
+    description: restrict the dp output data-lanes with value of 1-4
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 4 ]
+
+  ite,dp-output-max-pixel-clock-mhz:
+    description: restrict max pixel clock
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 150
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description: A port node pointing to DPI host port node
@@ -84,6 +94,8 @@ examples:
             pwr18-supply = <&it6505_pp18_reg>;
             reset-gpios = <&pio 179 1>;
             extcon = <&usbc_extcon>;
+            ite,dp-output-data-lane-count = <2>;
+            ite,dp-output-max-pixel-clock-mhz = <150>;
 
             port {
                 it6505_in: endpoint {
-- 
2.25.1
Re: [PATCH v3 1/2] dt-bindings: it6505: add properties to restrict output bandwidth
Posted by Rob Herring 3 years, 6 months ago 
On Wed, Oct 5, 2022 at 9:05 PM allen <allen.chen@ite.com.tw> wrote:
>
> From: allen chen <allen.chen@ite.com.tw>
>
> Add properties to restrict dp output data-lanes and clock.
>
> Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
> Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
> ---
>  .../bindings/display/bridge/ite,it6505.yaml          | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> index 833d11b2303a..f5482a614d05 100644
> --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> @@ -52,6 +52,16 @@ properties:
>      maxItems: 1
>      description: extcon specifier for the Power Delivery
>
> +  ite,dp-output-data-lane-count:
> +    description: restrict the dp output data-lanes with value of 1-4
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 1, 2, 4 ]

We have a standard property for lanes: data-lanes

It goes in the endpoint.

> +
> +  ite,dp-output-max-pixel-clock-mhz:
> +    description: restrict max pixel clock
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    default: 150

Also have a common property for this: 'link-frequencies'
Re: [PATCH v3 1/2] dt-bindings: it6505: add properties to restrict output bandwidth
Posted by Rob Herring 3 years, 6 months ago 
On Thu, 06 Oct 2022 10:04:43 +0800, allen wrote:
> From: allen chen <allen.chen@ite.com.tw>
> 
> Add properties to restrict dp output data-lanes and clock.
> 
> Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
> Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
> ---
>  .../bindings/display/bridge/ite,it6505.yaml          | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml: properties:ite,dp-output-max-pixel-clock-mhz: '$ref' should not be valid under {'const': '$ref'}
	hint: Standard unit suffix properties don't need a type $ref
	from schema $id: http://devicetree.org/meta-schemas/core.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Re: [PATCH v3 1/2] dt-bindings: it6505: add properties to restrict output bandwidth
Posted by Krzysztof Kozlowski 3 years, 6 months ago 
On 06/10/2022 04:04, allen wrote:
> From: allen chen <allen.chen@ite.com.tw>
> 
> Add properties to restrict dp output data-lanes and clock.
> 
> Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
> Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
> ---
>  .../bindings/display/bridge/ite,it6505.yaml          | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> index 833d11b2303a..f5482a614d05 100644
> --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> @@ -52,6 +52,16 @@ properties:
>      maxItems: 1
>      description: extcon specifier for the Power Delivery
>  
> +  ite,dp-output-data-lane-count:
> +    description: restrict the dp output data-lanes with value of 1-4

Drop "with value of 1-4" because it is redundant, but instead explain
what this property is about. "Restrict output" is not yet enough.
Restrict the number? Or choose specific lanes? Why it cannot be
data-lanes from video-interfaces?

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 1, 2, 4 ]
> +
> +  ite,dp-output-max-pixel-clock-mhz:

Test your patches before sending.

Best regards,
Krzysztof
RE: [PATCH v3 1/2] dt-bindings: it6505: add properties to restrict output bandwidth
Posted by allen.chen@ite.com.tw 3 years, 6 months ago 
hi

-----Original Message-----
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> 
Sent: Thursday, October 6, 2022 4:17 PM
To: Allen Chen (陳柏宇) <allen.chen@ite.com.tw>
Cc: Jau-Chih Tseng (曾昭智) <Jau-Chih.Tseng@ite.com.tw>; Kenneth Hung (洪家倫) <Kenneth.Hung@ite.com.tw>; Hermes Wu (吳佳宏) <Hermes.Wu@ite.com.tw>; Pin-yen Lin <treapking@chromium.org>; Andrzej Hajda <andrzej.hajda@intel.com>; Neil Armstrong <narmstrong@baylibre.com>; Robert Foss <robert.foss@linaro.org>; Laurent Pinchart <Laurent.pinchart@ideasonboard.com>; Jonas Karlman <jonas@kwiboo.se>; Jernej Skrabec <jernej.skrabec@gmail.com>; David Airlie <airlied@linux.ie>; Daniel Vetter <daniel@ffwll.ch>; Rob Herring <robh+dt@kernel.org>; Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>; open list:DRM DRIVERS <dri-devel@lists.freedesktop.org>; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS <devicetree@vger.kernel.org>; open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 1/2] dt-bindings: it6505: add properties to restrict output bandwidth

On 06/10/2022 04:04, allen wrote:
> From: allen chen <allen.chen@ite.com.tw>
> 
> Add properties to restrict dp output data-lanes and clock.
> 
> Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
> Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
> ---
>  .../bindings/display/bridge/ite,it6505.yaml          | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git 
> a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml 
> b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> index 833d11b2303a..f5482a614d05 100644
> --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> @@ -52,6 +52,16 @@ properties:
>      maxItems: 1
>      description: extcon specifier for the Power Delivery
>  
> +  ite,dp-output-data-lane-count:
> +    description: restrict the dp output data-lanes with value of 1-4

Drop "with value of 1-4" because it is redundant, but instead explain what this property is about. "Restrict output" is not yet enough.
Restrict the number? Or choose specific lanes? Why it cannot be data-lanes from video-interfaces?

==> DP output bandwidth depends on data-lane-count, so the number of output data-lane-count will restrict output bandwidth.
In this dt-binding we don't have output endpoint, so use another property name to configure.
If need to use data-lanes, where can we put in this dt-binding?

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 1, 2, 4 ]
> +
> +  ite,dp-output-max-pixel-clock-mhz:

Test your patches before sending.

Best regards,
Krzysztof
Re: [PATCH v3 1/2] dt-bindings: it6505: add properties to restrict output bandwidth
Posted by Krzysztof Kozlowski 3 years, 6 months ago 
On 07/10/2022 05:18, allen.chen@ite.com.tw wrote:
> hi
> 
> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> 
> Sent: Thursday, October 6, 2022 4:17 PM
> To: Allen Chen (陳柏宇) <allen.chen@ite.com.tw>
> Cc: Jau-Chih Tseng (曾昭智) <Jau-Chih.Tseng@ite.com.tw>; Kenneth Hung (洪家倫) <Kenneth.Hung@ite.com.tw>; Hermes Wu (吳佳宏) <Hermes.Wu@ite.com.tw>; Pin-yen Lin <treapking@chromium.org>; Andrzej Hajda <andrzej.hajda@intel.com>; Neil Armstrong <narmstrong@baylibre.com>; Robert Foss <robert.foss@linaro.org>; Laurent Pinchart <Laurent.pinchart@ideasonboard.com>; Jonas Karlman <jonas@kwiboo.se>; Jernej Skrabec <jernej.skrabec@gmail.com>; David Airlie <airlied@linux.ie>; Daniel Vetter <daniel@ffwll.ch>; Rob Herring <robh+dt@kernel.org>; Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>; open list:DRM DRIVERS <dri-devel@lists.freedesktop.org>; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS <devicetree@vger.kernel.org>; open list <linux-kernel@vger.kernel.org>
> Subject: Re: [PATCH v3 1/2] dt-bindings: it6505: add properties to restrict output bandwidth
> 
> On 06/10/2022 04:04, allen wrote:
>> From: allen chen <allen.chen@ite.com.tw>
>>
>> Add properties to restrict dp output data-lanes and clock.
>>
>> Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
>> Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
>> ---
>>  .../bindings/display/bridge/ite,it6505.yaml          | 12 ++++++++++++
>>  1 file changed, 12 insertions(+)
>>
>> diff --git 
>> a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml 
>> b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
>> index 833d11b2303a..f5482a614d05 100644
>> --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
>> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
>> @@ -52,6 +52,16 @@ properties:
>>      maxItems: 1
>>      description: extcon specifier for the Power Delivery
>>  
>> +  ite,dp-output-data-lane-count:
>> +    description: restrict the dp output data-lanes with value of 1-4
> 
> Drop "with value of 1-4" because it is redundant, but instead explain what this property is about. "Restrict output" is not yet enough.
> Restrict the number? Or choose specific lanes? Why it cannot be data-lanes from video-interfaces?
> 
> ==> DP output bandwidth depends on data-lane-count, so the number of output data-lane-count will restrict output bandwidth.
> In this dt-binding we don't have output endpoint, so use another property name to configure.
> If need to use data-lanes, where can we put in this dt-binding?

I see you got review in v2 to rename it, but it still should be the same
property, if it has similar/same meaning. It can be put here. You just
need to define its type or reference other schema (e.g. video-interfaces
if applicable) which defines it.

Best regards,
Krzysztof

Patchew 2.1-devel-ea86937

© 2016 - 2026 Red Hat, Inc.