On 02-10-22, 08:45, Michael Trimarchi wrote:
> The function is used to avoid to enable clock on the hardware
> if the mode requested is invalid
>
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> ---
> .../phy/rockchip/phy-rockchip-inno-dsidphy.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
> index 630e01b5c19b..644cf73cfd53 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
> @@ -217,6 +217,20 @@ static void phy_update_bits(struct inno_dsidphy *inno,
> writel(tmp, inno->phy_base + reg);
> }
>
> +static int inno_is_valid_phy_mode(struct inno_dsidphy *inno)
> +{
> + switch (inno->mode) {
> + case PHY_MODE_MIPI_DPHY:
> + break;
> + case PHY_MODE_LVDS:
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +};
> +
> static unsigned long inno_dsidphy_pll_calc_rate(struct inno_dsidphy *inno,
> unsigned long rate)
> {
> @@ -495,6 +509,11 @@ static void inno_dsidphy_lvds_mode_enable(struct inno_dsidphy *inno)
> static int inno_dsidphy_power_on(struct phy *phy)
> {
> struct inno_dsidphy *inno = phy_get_drvdata(phy);
> + int ret = 0;
this initialization is superfluous
> +
> + ret = inno_is_valid_phy_mode(inno);
> + if (ret)
> + return ret;
>
> clk_prepare_enable(inno->pclk_phy);
> clk_prepare_enable(inno->ref_clk);
> --
> 2.34.1
--
~Vinod