[PATCH] ARM: dts: qcom: pmx65: use node name "gpio" for spmi-gpio

Luca Weiss posted 1 patch 3 years, 6 months ago
arch/arm/boot/dts/qcom-pmx65.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
[PATCH] ARM: dts: qcom: pmx65: use node name "gpio" for spmi-gpio
Posted by Luca Weiss 3 years, 6 months ago
All other usages of qcom,spmi-gpio use the gpio@ node name, and this is
also validated by the dt binding check. Fix it.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm/boot/dts/qcom-pmx65.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi
index abf229a8b75a..1c7fdf59c1f5 100644
--- a/arch/arm/boot/dts/qcom-pmx65.dtsi
+++ b/arch/arm/boot/dts/qcom-pmx65.dtsi
@@ -20,7 +20,7 @@ pmx65_temp: temp-alarm@a00 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		pmx65_gpios: pinctrl@8800 {
+		pmx65_gpios: gpio@8800 {
 			compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
 			gpio-controller;
-- 
2.37.3
Re: [PATCH] ARM: dts: qcom: pmx65: use node name "gpio" for spmi-gpio
Posted by Bjorn Andersson 3 years, 5 months ago
On Sun, 25 Sep 2022 21:06:21 +0200, Luca Weiss wrote:
> All other usages of qcom,spmi-gpio use the gpio@ node name, and this is
> also validated by the dt binding check. Fix it.
> 
> 

Applied, thanks!

[1/1] ARM: dts: qcom: pmx65: use node name "gpio" for spmi-gpio
      commit: da76bc88bde1dc3f547078282e30a88c371699ad

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>
Re: [PATCH] ARM: dts: qcom: pmx65: use node name "gpio" for spmi-gpio
Posted by Krzysztof Kozlowski 3 years, 6 months ago
On 25/09/2022 21:06, Luca Weiss wrote:
> All other usages of qcom,spmi-gpio use the gpio@ node name, and this is
> also validated by the dt binding check. Fix it.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Re: [PATCH] ARM: dts: qcom: pmx65: use node name "gpio" for spmi-gpio
Posted by Neil Armstrong 3 years, 6 months ago
On 25/09/2022 21:06, Luca Weiss wrote:
> All other usages of qcom,spmi-gpio use the gpio@ node name, and this is
> also validated by the dt binding check. Fix it.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>   arch/arm/boot/dts/qcom-pmx65.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi
> index abf229a8b75a..1c7fdf59c1f5 100644
> --- a/arch/arm/boot/dts/qcom-pmx65.dtsi
> +++ b/arch/arm/boot/dts/qcom-pmx65.dtsi
> @@ -20,7 +20,7 @@ pmx65_temp: temp-alarm@a00 {
>   			#thermal-sensor-cells = <0>;
>   		};
>   
> -		pmx65_gpios: pinctrl@8800 {
> +		pmx65_gpios: gpio@8800 {
>   			compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
>   			reg = <0x8800>;
>   			gpio-controller;

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>