[PATCH v2 0/4] Add support for Toshiba TC358746

Marco Felsch posted 4 patches 3 years, 3 months ago
There is a newer version of this series
.../bindings/media/i2c/toshiba,tc358746.yaml  |  179 ++
drivers/media/i2c/Kconfig                     |   17 +
drivers/media/i2c/Makefile                    |    1 +
drivers/media/i2c/tc358746.c                  | 1682 +++++++++++++++++
drivers/phy/phy-core-mipi-dphy.c              |   31 +-
include/linux/phy/phy-mipi-dphy.h             |    3 +
6 files changed, 1909 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
create mode 100644 drivers/media/i2c/tc358746.c
[PATCH v2 0/4] Add support for Toshiba TC358746
Posted by Marco Felsch 3 years, 3 months ago
Hi,

this small series adds the support for the Toshiba TC358746 MIPI-CSI to
Parallel converter chip. The v1 of this series can be found here. Thanks
a lot for the review feedback from Laurent, which was very helpful.

Regards,
  Marco

[1] https://lore.kernel.org/all/20220818143307.967150-1-m.felsch@pengutronix.de/

Marco Felsch (4):
  phy: dphy: refactor get_default_config
  phy: dphy: add support to calculate the timing based on hs_clk_rate
  media: dt-bindings: add bindings for Toshiba TC358746
  media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver

 .../bindings/media/i2c/toshiba,tc358746.yaml  |  179 ++
 drivers/media/i2c/Kconfig                     |   17 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/tc358746.c                  | 1682 +++++++++++++++++
 drivers/phy/phy-core-mipi-dphy.c              |   31 +-
 include/linux/phy/phy-mipi-dphy.h             |    3 +
 6 files changed, 1909 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
 create mode 100644 drivers/media/i2c/tc358746.c

-- 
2.30.2