Since the driver does not act upon the max_sdu argument (which it
should, in full offload mode), deny any other values except the default
all-zeroes, which means that all traffic classes should use the same MTU
as the port itself.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
drivers/net/dsa/sja1105/sja1105_tas.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/sja1105/sja1105_tas.c b/drivers/net/dsa/sja1105/sja1105_tas.c
index e6153848a950..607f4714fb01 100644
--- a/drivers/net/dsa/sja1105/sja1105_tas.c
+++ b/drivers/net/dsa/sja1105/sja1105_tas.c
@@ -511,7 +511,7 @@ int sja1105_setup_tc_taprio(struct dsa_switch *ds, int port,
{
struct sja1105_private *priv = ds->priv;
struct sja1105_tas_data *tas_data = &priv->tas_data;
- int other_port, rc, i;
+ int other_port, rc, i, tc;
/* Can't change an already configured port (must delete qdisc first).
* Can't delete the qdisc from an unconfigured port.
@@ -519,6 +519,10 @@ int sja1105_setup_tc_taprio(struct dsa_switch *ds, int port,
if (!!tas_data->offload[port] == admin->enable)
return -EINVAL;
+ for (tc = 0; tc < TC_MAX_QUEUE; tc++)
+ if (admin->max_sdu[tc])
+ return -EOPNOTSUPP;
+
if (!admin->enable) {
taprio_offload_free(tas_data->offload[port]);
tas_data->offload[port] = NULL;
--
2.34.1