From: Tim Harvey <tharvey@gateworks.com>
[ Upstream commit 7f4dbc3f26e5cb1f056faaaf14277f48c4682fff ]
Since commit 65ac79e18120 ("net: dsa: microchip: add the phylink
get_caps") the phy-mode must be set otherwise the switch driver will
assume "NA" mode and invalidate the port.
Fixes: 65ac79e18120 ("net: dsa: microchip: add the phylink get_caps")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index 24737e89038a4..96cac0f969a77 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -626,24 +626,28 @@
lan1: port@0 {
reg = <0>;
label = "lan1";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan2: port@1 {
reg = <1>;
label = "lan2";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan3: port@2 {
reg = <2>;
label = "lan3";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan4: port@3 {
reg = <3>;
label = "lan4";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
--
2.35.1