[PATCH v3 2/7] arm64: dts: mediatek: cherry: Wire up the ChromeOS Embedded Controller

AngeloGioacchino Del Regno posted 7 patches 2 years ago
[PATCH v3 2/7] arm64: dts: mediatek: cherry: Wire up the ChromeOS Embedded Controller
Posted by AngeloGioacchino Del Regno 2 years ago
Wire up the ChromeOS Embedded Controller on SPI0 and its communication
channel via SCP RPMSG along with all of the offered functionality,
including Keyboard, Smart Battery Metrics (SBS), keyboard backlight,
I2C tunnel, regulators and Type-C connector management.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 .../boot/dts/mediatek/mt8195-cherry.dtsi      | 77 +++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index e83d58d99757..73f531f84fa2 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -426,6 +426,14 @@ &pio {
 		"AP_SPI_FLASH_MOSI",
 		"AP_SPI_FLASH_MISO";
 
+	cros_ec_int: cros-ec-irq-default-pins {
+		pins-ec-ap-int-odl {
+			pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			input-enable;
+		};
+	};
+
 	i2c0_pins: i2c0-default-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
@@ -670,6 +678,11 @@ &scp {
 	memory-region = <&scp_mem>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&scp_pins>;
+
+	cros-ec-rpmsg {
+		compatible = "google,cros-ec-rpmsg";
+		mediatek,rpmsg-name = "cros-ec-rpmsg";
+	};
 };
 
 &spi0 {
@@ -678,6 +691,67 @@ &spi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
 	mediatek,pad-select = <0>;
+
+	cros_ec: ec@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupts-extended = <&pio 4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cros_ec_int>;
+		spi-max-frequency = <3000000>;
+
+		keyboard-backlight {
+			compatible = "google,cros-kbd-led-backlight";
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mt_pmic_vmc_ldo_reg: regulator@0 {
+			compatible = "google,cros-ec-regulator";
+			reg = <0>;
+			regulator-name = "mt_pmic_vmc_ldo";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		mt_pmic_vmch_ldo_reg: regulator@1 {
+			compatible = "google,cros-ec-regulator";
+			reg = <1>;
+			regulator-name = "mt_pmic_vmch_ldo";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
 };
 
 &u3phy0 {
@@ -729,3 +803,6 @@ &xhci3 {
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
-- 
2.37.2