Provide thermal zone to read thermal sensor in the SoC. We can read all the
thermal sensors value in the SoC by the node /sys/class/thermal/
In mtk_thermal_bank_temperature, return -EAGAIN instead of -EACCESS
on the first read of sensor that often are bogus values.
This can avoid following warning on boot:
thermal thermal_zone6: failed to read out thermal zone (-13)
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
---
Changes in V3:
- Use proper types.
- Use devm_kmalloc() instead of kmalloc().
- Fix tabs and spaces.
drivers/thermal/mtk_thermal.c | 100 ++++++++++++++++++++++++++--------
1 file changed, 76 insertions(+), 24 deletions(-)
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 088c388da241..5901787c57f5 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -259,6 +259,11 @@ enum mtk_thermal_version {
struct mtk_thermal;
+struct mtk_thermal_zone {
+ struct mtk_thermal *mt;
+ int id;
+};
+
struct thermal_bank_cfg {
unsigned int num_sensors;
const int *sensors;
@@ -709,6 +714,32 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
mutex_unlock(&mt->lock);
}
+static int _get_sensor_temp(struct mtk_thermal *mt, int id)
+{
+ u32 raw;
+ int temp;
+
+ const struct mtk_thermal_data *conf = mt->conf;
+
+ raw = readl(mt->thermal_base + conf->msr[id]);
+
+ if (mt->conf->version == MTK_THERMAL_V1)
+ temp = raw_to_mcelsius_v1(mt, id, raw);
+ else
+ temp = raw_to_mcelsius_v2(mt, id, raw);
+
+ /*
+ * The first read of a sensor often contains very high bogus
+ * temperature value. Filter these out so that the system does
+ * not immediately shut down.
+ */
+
+ if (temp > 200000)
+ return -EAGAIN;
+ else
+ return temp;
+}
+
/**
* mtk_thermal_bank_temperature - get the temperature of a bank
* @bank: The bank
@@ -721,26 +752,9 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
struct mtk_thermal *mt = bank->mt;
const struct mtk_thermal_data *conf = mt->conf;
int i, temp = INT_MIN, max = INT_MIN;
- u32 raw;
for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
- raw = readl(mt->thermal_base + conf->msr[i]);
-
- if (mt->conf->version == MTK_THERMAL_V1) {
- temp = raw_to_mcelsius_v1(
- mt, conf->bank_data[bank->id].sensors[i], raw);
- } else {
- temp = raw_to_mcelsius_v2(
- mt, conf->bank_data[bank->id].sensors[i], raw);
- }
-
- /*
- * The first read of a sensor often contains very high bogus
- * temperature value. Filter these out so that the system does
- * not immediately shut down.
- */
- if (temp > 200000)
- temp = 0;
+ temp = _get_sensor_temp(mt, i);
if (temp > max)
max = temp;
@@ -751,7 +765,8 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
static int mtk_read_temp(void *data, int *temperature)
{
- struct mtk_thermal *mt = data;
+ struct mtk_thermal_zone *tz = data;
+ struct mtk_thermal *mt = tz->mt;
int i;
int tempmax = INT_MIN;
@@ -770,10 +785,28 @@ static int mtk_read_temp(void *data, int *temperature)
return 0;
}
+static int mtk_read_sensor_temp(void *data, int *temperature)
+{
+ struct mtk_thermal_zone *tz = data;
+ struct mtk_thermal *mt = tz->mt;
+ int id = tz->id - 1;
+
+ if (id < 0)
+ return -EACCES;
+
+ *temperature = _get_sensor_temp(mt, id);
+
+ return 0;
+}
+
static const struct thermal_zone_of_device_ops mtk_thermal_ops = {
.get_temp = mtk_read_temp,
};
+static const struct thermal_zone_of_device_ops mtk_thermal_sensor_ops = {
+ .get_temp = mtk_read_sensor_temp,
+};
+
static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
u32 apmixed_phys_base, u32 auxadc_phys_base,
int ctrl_id)
@@ -1072,6 +1105,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
u64 auxadc_phys_base, apmixed_phys_base;
struct thermal_zone_device *tzdev;
void __iomem *apmixed_base, *auxadc_base;
+ struct mtk_thermal_zone *tz;
mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
if (!mt)
@@ -1161,11 +1195,29 @@ static int mtk_thermal_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mt);
- tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, mt,
- &mtk_thermal_ops);
- if (IS_ERR(tzdev)) {
- ret = PTR_ERR(tzdev);
- goto err_disable_clk_peri_therm;
+ for (i = 0; i < mt->conf->num_sensors + 1; i++) {
+ tz = devm_kmalloc(&pdev->dev, sizeof(*tz), GFP_KERNEL);
+ if (!tz)
+ return -ENOMEM;
+
+ tz->mt = mt;
+ tz->id = i;
+
+ tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, i, tz, (i == 0) ?
+ &mtk_thermal_ops :
+ &mtk_thermal_sensor_ops);
+
+ if (IS_ERR(tzdev)) {
+ if (PTR_ERR(tzdev) == -ENODEV) {
+ dev_warn(&pdev->dev,
+ "sensor %d not registered in thermal zone in dt\n", i);
+ continue;
+ }
+ if (PTR_ERR(tzdev) == -EACCES) {
+ ret = PTR_ERR(tzdev);
+ goto err_disable_clk_peri_therm;
+ }
+ }
}
ret = devm_thermal_add_hwmon_sysfs(tzdev);
--
2.37.3
Hi Amjad, On 01/09/2022 15:39, Amjad Ouled-Ameur wrote: > Provide thermal zone to read thermal sensor in the SoC. We can read all the > thermal sensors value in the SoC by the node /sys/class/thermal/ > > In mtk_thermal_bank_temperature, return -EAGAIN instead of -EACCESS > on the first read of sensor that often are bogus values. > This can avoid following warning on boot: > > thermal thermal_zone6: failed to read out thermal zone (-13) > > Signed-off-by: Michael Kao <michael.kao@mediatek.com> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> > --- > Changes in V3: > - Use proper types. > - Use devm_kmalloc() instead of kmalloc(). > - Fix tabs and spaces. > > drivers/thermal/mtk_thermal.c | 100 ++++++++++++++++++++++++++-------- > 1 file changed, 76 insertions(+), 24 deletions(-) > > diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c > index 088c388da241..5901787c57f5 100644 > --- a/drivers/thermal/mtk_thermal.c > +++ b/drivers/thermal/mtk_thermal.c > @@ -259,6 +259,11 @@ enum mtk_thermal_version { > > struct mtk_thermal; > > +struct mtk_thermal_zone { > + struct mtk_thermal *mt; > + int id; > +}; > + > struct thermal_bank_cfg { > unsigned int num_sensors; > const int *sensors; > @@ -709,6 +714,32 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank) > mutex_unlock(&mt->lock); > } > > +static int _get_sensor_temp(struct mtk_thermal *mt, int id) > +{ > + u32 raw; > + int temp; > + > + const struct mtk_thermal_data *conf = mt->conf; > + > + raw = readl(mt->thermal_base + conf->msr[id]); > + > + if (mt->conf->version == MTK_THERMAL_V1) > + temp = raw_to_mcelsius_v1(mt, id, raw); > + else > + temp = raw_to_mcelsius_v2(mt, id, raw); Can you set a callback at init time instead of checking the version at each get_sensor_temp() ? > + /* > + * The first read of a sensor often contains very high bogus > + * temperature value. Filter these out so that the system does > + * not immediately shut down. > + */ > + > + if (temp > 200000) > + return -EAGAIN; > + else > + return temp; > +} > + > /** > * mtk_thermal_bank_temperature - get the temperature of a bank > * @bank: The bank > @@ -721,26 +752,9 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) > struct mtk_thermal *mt = bank->mt; > const struct mtk_thermal_data *conf = mt->conf; > int i, temp = INT_MIN, max = INT_MIN; > - u32 raw; > > for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { > - raw = readl(mt->thermal_base + conf->msr[i]); > - > - if (mt->conf->version == MTK_THERMAL_V1) { > - temp = raw_to_mcelsius_v1( > - mt, conf->bank_data[bank->id].sensors[i], raw); > - } else { > - temp = raw_to_mcelsius_v2( > - mt, conf->bank_data[bank->id].sensors[i], raw); > - } > - > - /* > - * The first read of a sensor often contains very high bogus > - * temperature value. Filter these out so that the system does > - * not immediately shut down. > - */ > - if (temp > 200000) > - temp = 0; > + temp = _get_sensor_temp(mt, i); > > if (temp > max) > max = temp; > @@ -751,7 +765,8 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) > > static int mtk_read_temp(void *data, int *temperature) > { > - struct mtk_thermal *mt = data; > + struct mtk_thermal_zone *tz = data; > + struct mtk_thermal *mt = tz->mt; > int i; > int tempmax = INT_MIN; > > @@ -770,10 +785,28 @@ static int mtk_read_temp(void *data, int *temperature) > return 0; > } > > +static int mtk_read_sensor_temp(void *data, int *temperature) > +{ > + struct mtk_thermal_zone *tz = data; > + struct mtk_thermal *mt = tz->mt; > + int id = tz->id - 1; > + > + if (id < 0) > + return -EACCES; > + > + *temperature = _get_sensor_temp(mt, id); > + > + return 0; > +} > + > static const struct thermal_zone_of_device_ops mtk_thermal_ops = { > .get_temp = mtk_read_temp, > }; > > +static const struct thermal_zone_of_device_ops mtk_thermal_sensor_ops = { > + .get_temp = mtk_read_sensor_temp, > +}; Please respin against linux-next, the thermal_zone_of_device_ops structure does no longer exist. The conversion is trivial, here is a example: https://lore.kernel.org/all/20220804224349.1926752-21-daniel.lezcano@linexp.org/ > static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, > u32 apmixed_phys_base, u32 auxadc_phys_base, > int ctrl_id) > @@ -1072,6 +1105,7 @@ static int mtk_thermal_probe(struct platform_device *pdev) > u64 auxadc_phys_base, apmixed_phys_base; > struct thermal_zone_device *tzdev; > void __iomem *apmixed_base, *auxadc_base; > + struct mtk_thermal_zone *tz; > > mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL); > if (!mt) > @@ -1161,11 +1195,29 @@ static int mtk_thermal_probe(struct platform_device *pdev) > > platform_set_drvdata(pdev, mt); > > - tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, mt, > - &mtk_thermal_ops); > - if (IS_ERR(tzdev)) { > - ret = PTR_ERR(tzdev); > - goto err_disable_clk_peri_therm; > + for (i = 0; i < mt->conf->num_sensors + 1; i++) { > + tz = devm_kmalloc(&pdev->dev, sizeof(*tz), GFP_KERNEL); > + if (!tz) > + return -ENOMEM; > + > + tz->mt = mt; > + tz->id = i; > + > + tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, i, tz, (i == 0) ? > + &mtk_thermal_ops : > + &mtk_thermal_sensor_ops); > + > + if (IS_ERR(tzdev)) { > + if (PTR_ERR(tzdev) == -ENODEV) { > + dev_warn(&pdev->dev, > + "sensor %d not registered in thermal zone in dt\n", i); > + continue; > + } > + if (PTR_ERR(tzdev) == -EACCES) { > + ret = PTR_ERR(tzdev); > + goto err_disable_clk_peri_therm; > + } > + } > } > > ret = devm_thermal_add_hwmon_sysfs(tzdev); -- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Hi Daniel, Thank you for the review. On 9/8/22 11:07, Daniel Lezcano wrote: > > Hi Amjad, > > On 01/09/2022 15:39, Amjad Ouled-Ameur wrote: >> Provide thermal zone to read thermal sensor in the SoC. We can read >> all the >> thermal sensors value in the SoC by the node /sys/class/thermal/ >> >> In mtk_thermal_bank_temperature, return -EAGAIN instead of -EACCESS >> on the first read of sensor that often are bogus values. >> This can avoid following warning on boot: >> >> thermal thermal_zone6: failed to read out thermal zone (-13) >> >> Signed-off-by: Michael Kao <michael.kao@mediatek.com> >> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> >> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> >> --- >> Changes in V3: >> - Use proper types. >> - Use devm_kmalloc() instead of kmalloc(). >> - Fix tabs and spaces. >> >> drivers/thermal/mtk_thermal.c | 100 ++++++++++++++++++++++++++-------- >> 1 file changed, 76 insertions(+), 24 deletions(-) >> >> diff --git a/drivers/thermal/mtk_thermal.c >> b/drivers/thermal/mtk_thermal.c >> index 088c388da241..5901787c57f5 100644 >> --- a/drivers/thermal/mtk_thermal.c >> +++ b/drivers/thermal/mtk_thermal.c >> @@ -259,6 +259,11 @@ enum mtk_thermal_version { >> struct mtk_thermal; >> +struct mtk_thermal_zone { >> + struct mtk_thermal *mt; >> + int id; >> +}; >> + >> struct thermal_bank_cfg { >> unsigned int num_sensors; >> const int *sensors; >> @@ -709,6 +714,32 @@ static void mtk_thermal_put_bank(struct >> mtk_thermal_bank *bank) >> mutex_unlock(&mt->lock); >> } >> +static int _get_sensor_temp(struct mtk_thermal *mt, int id) >> +{ >> + u32 raw; >> + int temp; >> + >> + const struct mtk_thermal_data *conf = mt->conf; >> + >> + raw = readl(mt->thermal_base + conf->msr[id]); >> + >> + if (mt->conf->version == MTK_THERMAL_V1) >> + temp = raw_to_mcelsius_v1(mt, id, raw); >> + else >> + temp = raw_to_mcelsius_v2(mt, id, raw); > > Can you set a callback at init time instead of checking the version at > each get_sensor_temp() ? > Good idea, will add it in v4. >> + /* >> + * The first read of a sensor often contains very high bogus >> + * temperature value. Filter these out so that the system does >> + * not immediately shut down. >> + */ >> + >> + if (temp > 200000) >> + return -EAGAIN; >> + else >> + return temp; >> +} >> + >> /** >> * mtk_thermal_bank_temperature - get the temperature of a bank >> * @bank: The bank >> @@ -721,26 +752,9 @@ static int mtk_thermal_bank_temperature(struct >> mtk_thermal_bank *bank) >> struct mtk_thermal *mt = bank->mt; >> const struct mtk_thermal_data *conf = mt->conf; >> int i, temp = INT_MIN, max = INT_MIN; >> - u32 raw; >> for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { >> - raw = readl(mt->thermal_base + conf->msr[i]); >> - >> - if (mt->conf->version == MTK_THERMAL_V1) { >> - temp = raw_to_mcelsius_v1( >> - mt, conf->bank_data[bank->id].sensors[i], raw); >> - } else { >> - temp = raw_to_mcelsius_v2( >> - mt, conf->bank_data[bank->id].sensors[i], raw); >> - } >> - >> - /* >> - * The first read of a sensor often contains very high bogus >> - * temperature value. Filter these out so that the system does >> - * not immediately shut down. >> - */ >> - if (temp > 200000) >> - temp = 0; >> + temp = _get_sensor_temp(mt, i); >> if (temp > max) >> max = temp; >> @@ -751,7 +765,8 @@ static int mtk_thermal_bank_temperature(struct >> mtk_thermal_bank *bank) >> static int mtk_read_temp(void *data, int *temperature) >> { >> - struct mtk_thermal *mt = data; >> + struct mtk_thermal_zone *tz = data; >> + struct mtk_thermal *mt = tz->mt; >> int i; >> int tempmax = INT_MIN; >> @@ -770,10 +785,28 @@ static int mtk_read_temp(void *data, int >> *temperature) >> return 0; >> } >> +static int mtk_read_sensor_temp(void *data, int *temperature) >> +{ >> + struct mtk_thermal_zone *tz = data; >> + struct mtk_thermal *mt = tz->mt; >> + int id = tz->id - 1; >> + >> + if (id < 0) >> + return -EACCES; >> + >> + *temperature = _get_sensor_temp(mt, id); >> + >> + return 0; >> +} >> + >> static const struct thermal_zone_of_device_ops mtk_thermal_ops = { >> .get_temp = mtk_read_temp, >> }; >> >> +static const struct thermal_zone_of_device_ops >> mtk_thermal_sensor_ops = { >> + .get_temp = mtk_read_sensor_temp, >> +}; > > Please respin against linux-next, the thermal_zone_of_device_ops > structure does no longer exist. The conversion is trivial, here is a > example: > > https://lore.kernel.org/all/20220804224349.1926752-21-daniel.lezcano@linexp.org/ > > Sure, will do. > >> static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, >> u32 apmixed_phys_base, u32 auxadc_phys_base, >> int ctrl_id) >> @@ -1072,6 +1105,7 @@ static int mtk_thermal_probe(struct >> platform_device *pdev) >> u64 auxadc_phys_base, apmixed_phys_base; >> struct thermal_zone_device *tzdev; >> void __iomem *apmixed_base, *auxadc_base; >> + struct mtk_thermal_zone *tz; >> mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL); >> if (!mt) >> @@ -1161,11 +1195,29 @@ static int mtk_thermal_probe(struct >> platform_device *pdev) >> platform_set_drvdata(pdev, mt); >> - tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, mt, >> - &mtk_thermal_ops); >> - if (IS_ERR(tzdev)) { >> - ret = PTR_ERR(tzdev); >> - goto err_disable_clk_peri_therm; >> + for (i = 0; i < mt->conf->num_sensors + 1; i++) { >> + tz = devm_kmalloc(&pdev->dev, sizeof(*tz), GFP_KERNEL); >> + if (!tz) >> + return -ENOMEM; >> + >> + tz->mt = mt; >> + tz->id = i; >> + >> + tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, i, >> tz, (i == 0) ? >> + &mtk_thermal_ops : >> + &mtk_thermal_sensor_ops); >> + >> + if (IS_ERR(tzdev)) { >> + if (PTR_ERR(tzdev) == -ENODEV) { >> + dev_warn(&pdev->dev, >> + "sensor %d not registered in thermal zone in >> dt\n", i); >> + continue; >> + } >> + if (PTR_ERR(tzdev) == -EACCES) { >> + ret = PTR_ERR(tzdev); >> + goto err_disable_clk_peri_therm; >> + } >> + } >> } >> ret = devm_thermal_add_hwmon_sysfs(tzdev); > > Regards, Amjad
© 2016 - 2024 Red Hat, Inc.