This adds a gpio-driver which multiplexes existing GPIOs using latches.
Uwe asked [1] if that would be accectable as a new gpio driver, and here
is the result. For a better description what this is all about have a
look at the drawings in the patches.

Sascha

[1] https://lore.kernel.org/all/CACRpkdaBO=JzokGUF6uXZc7ASVD7LjqBxTLGwX-FShM=A9gw9A@mail.gmail.com/t/

Changes since v1:
    - Use gpiod_set_value_cansleep when the underlying GPIOs might sleep
    - Move MODULE_DEVICE_TABLE near to the end
    - Add license to binding file
    - remove trailing whitespaces


Sascha Hauer (2):
  gpio: Add gpio latch driver
  dt-bindings: gpio: Add gpio-latch binding document

 .../devicetree/bindings/gpio/gpio-latch.yaml  |  84 ++++++++
 drivers/gpio/Kconfig                          |   6 +
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/gpio-latch.c                     | 190 ++++++++++++++++++
 4 files changed, 281 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-latch.yaml
 create mode 100644 drivers/gpio/gpio-latch.c

-- 
2.30.2