[v28] media: mediatek: support mdp3 on mt8183 platform

[PATCH v28 0/4] media: mediatek: support mdp3 on mt8183 platform

Moudy Ho posted 4 patches 2 years, 2 months ago

Diff against v9 v10 v11 v12 v13 v14 v15 v16 v17 v18 v19 v20 v21 v22 v23 v24 v25 v26 v27
Download series mbox

.../bindings/media/mediatek,mdp3-rdma.yaml    |   95 ++
.../bindings/media/mediatek,mdp3-rsz.yaml     |   77 ++
.../bindings/media/mediatek,mdp3-wrot.yaml    |   80 ++
.../bindings/soc/mediatek/mediatek,ccorr.yaml |   68 ++
.../bindings/soc/mediatek/mediatek,wdma.yaml  |   81 ++
arch/arm64/boot/dts/mediatek/mt8183.dtsi      |   63 +
drivers/media/platform/mediatek/Kconfig       |    1 +
drivers/media/platform/mediatek/Makefile      |    1 +
drivers/media/platform/mediatek/mdp3/Kconfig  |   20 +
drivers/media/platform/mediatek/mdp3/Makefile |    6 +
.../platform/mediatek/mdp3/mdp_reg_ccorr.h    |   19 +
.../platform/mediatek/mdp3/mdp_reg_rdma.h     |   65 ++
.../platform/mediatek/mdp3/mdp_reg_rsz.h      |   39 +
.../platform/mediatek/mdp3/mdp_reg_wdma.h     |   47 +
.../platform/mediatek/mdp3/mdp_reg_wrot.h     |   55 +
.../platform/mediatek/mdp3/mtk-img-ipi.h      |  290 +++++
.../platform/mediatek/mdp3/mtk-mdp3-cmdq.c    |  466 ++++++++
.../platform/mediatek/mdp3/mtk-mdp3-cmdq.h    |   43 +
.../platform/mediatek/mdp3/mtk-mdp3-comp.c    | 1033 +++++++++++++++++
.../platform/mediatek/mdp3/mtk-mdp3-comp.h    |  186 +++
.../platform/mediatek/mdp3/mtk-mdp3-core.c    |  357 ++++++
.../platform/mediatek/mdp3/mtk-mdp3-core.h    |   94 ++
.../platform/mediatek/mdp3/mtk-mdp3-m2m.c     |  724 ++++++++++++
.../platform/mediatek/mdp3/mtk-mdp3-m2m.h     |   48 +
.../platform/mediatek/mdp3/mtk-mdp3-regs.c    |  735 ++++++++++++
.../platform/mediatek/mdp3/mtk-mdp3-regs.h    |  373 ++++++
.../platform/mediatek/mdp3/mtk-mdp3-vpu.c     |  313 +++++
.../platform/mediatek/mdp3/mtk-mdp3-vpu.h     |   78 ++
28 files changed, 5457 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml
create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
create mode 100644 drivers/media/platform/mediatek/mdp3/Kconfig
create mode 100644 drivers/media/platform/mediatek/mdp3/Makefile
create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_ccorr.h
create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_rdma.h
create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_rsz.h
create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_wdma.h
create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_wrot.h
create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-img-ipi.h
create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c
create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.h
create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c
create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.h
create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c
create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.h
create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-m2m.c
create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-m2m.h
create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-regs.c
create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-regs.h
create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-vpu.c
create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-vpu.h

Expand all Fold all

[PATCH v28 0/4] media: mediatek: support mdp3 on mt8183 platform

Posted by Moudy Ho 2 years, 2 months ago

Change since v27:
- Rebase on v6.0-rc2
- Delete duplicate config in MDP3 Kconfig
- Relist maintainers in newly added bindings
- Minor changes in mtk-mdp3-comp.c and mtk-mdp3-reg.c to
  avoid unnecessary long line warnings.
- The v4l2-compliance test results are the same as v26.

Change since v26:
- Set MMSYS config from "depend on" to "select" in MDP3 Kconfig
  to avoid compilation errors of various combinations.
- Fix cast to smaller integer type 'enum mdp_comp_type' from
  'const void *' in mtk_mdp3_comp.c.
- Fix sparse warnings in mtk_mdp3_comp.c.
- The v4l2-compliance test results are the same as v26.

Change since v25:
- Add more COMPILE_TEST config in MDP3 Kconfig
- Adjust unnecessary log level in "mdp_m2m_s_selection" function to
  avoid spamming the kernel log for userspace errors.
- The v4l2-compliance test results list is as follows:

	v4l2-compliance 1.23.0-4942, 32 bits, 32-bit time_t
	v4l2-compliance SHA: 4cf258c24026 2022-07-28 15:43:45
	
	Compliance test for mtk-mdp3 device /dev/video0:
	
	Driver Info:
		Driver name      : mtk-mdp3
		Card type        : MediaTek MDP3
		Bus info         : platform:14001000.mdp3-rdma0
		Driver version   : 6.0.0
		Capabilities     : 0x84204000
			Video Memory-to-Memory Multiplanar
			Streaming
			Extended Pix Format
			Device Capabilities
		Device Caps      : 0x04204000
			Video Memory-to-Memory Multiplanar
			Streaming
			Extended Pix Format
	Required ioctls:
		test VIDIOC_QUERYCAP: OK
		test invalid ioctls: OK
	Allow for multiple opens:
		test second /dev/video0 open: OK
		test VIDIOC_QUERYCAP: OK
		test VIDIOC_G/S_PRIORITY: OK
		test for unlimited opens: OK
	Debug ioctls:
		test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
		test VIDIOC_LOG_STATUS: OK (Not Supported)
	Input ioctls:
		test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
		test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
		test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
		test VIDIOC_ENUMAUDIO: OK (Not Supported)
		test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
		test VIDIOC_G/S_AUDIO: OK (Not Supported)
		Inputs: 0 Audio Inputs: 0 Tuners: 0
	Output ioctls:
		test VIDIOC_G/S_MODULATOR: OK (Not Supported)
		test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
		test VIDIOC_ENUMAUDOUT: OK (Not Supported)
		test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
		test VIDIOC_G/S_AUDOUT: OK (Not Supported)
		Outputs: 0 Audio Outputs: 0 Modulators: 0
	Input/Output configuration ioctls:
		test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
		test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
		test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
		test VIDIOC_G/S_EDID: OK (Not Supported)
	Control ioctls:
		test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
		test VIDIOC_QUERYCTRL: OK
		test VIDIOC_G/S_CTRL: OK
		test VIDIOC_G/S/TRY_EXT_CTRLS: OK
		test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
		test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
		Standard Controls: 4 Private Controls: 0
	Format ioctls:
		test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
		test VIDIOC_G/S_PARM: OK (Not Supported)
		test VIDIOC_G_FBUF: OK (Not Supported)
		test VIDIOC_G_FMT: OK
		test VIDIOC_TRY_FMT: OK
		test VIDIOC_S_FMT: OK
		test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
		test Cropping: OK
		test Composing: OK
		test Scaling: OK
	Codec ioctls:
		test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
		test VIDIOC_G_ENC_INDEX: OK (Not Supported)
		test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
	Buffer ioctls:
		test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
		test VIDIOC_EXPBUF: OK
		test Requests: OK (Not Supported)
		test TIME32/64: OK
	Test input 0:
	Streaming ioctls:
		test read/write: OK (Not Supported)
		test blocking wait: OK
		<snip>
		test MMAP (no poll): OK
		<snip>
		test MMAP (select): OK
		<snip>
		test MMAP (epoll): OK
		test USERPTR (no poll): OK (Not Supported)
		test USERPTR (select): OK (Not Supported)
		test DMABUF: Cannot test, specify --expbuf-device
	Stream using all formats:
		<snip>
	Total for mtk-mdp3 device /dev/video0: 1592, Succeeded: 1592, Failed: 0, Warnings: 0

Change since v24:
- Rebase on v6.0-rc1.

Change since v23:
- Rebase on linux-next.
- Fix compilation error.

Change since v22:
- Rebase on linux-next.
- Fix typo about MDP3 in Kconfig.
- Adjust some non-essential logs to lower levels.

Change since v21:
- Rebase on linux-next.
- Following Hans suggestion, remove redundant kernel logs and
  revise a few non-functional code to make it clearer.
- Remove API abuse to set plane size.
- Added VPU send message failure error code for previous shortages.

Change since v20:
- Rebase on linux-next.
- Move the MDP3 GCE events to the corresponding node and adjust the
  relevant driver settings.

Change since v19:
- Rebase on linux-next.
- Export the function "mdp_cmdq_send" suggected by CK.
- Fix "Macro argument reuse" reported by checkpatch.pl

Change since v18:
- Rebase on linux-next.
- Adjust copyright date of MDP3 driver.
- Functions renaming as follows:
  [1] is_output_disable() => is_output_disabled()
  [2] mdp_component_init() => mdp_comp_config()
  [3] mdp_component_deinit() => mdp_comp_destroy()
  [4] mdp_comp_ctx_init() => mdp_comp_ctx_config()
  [5] mdp_sub_comps_create() => mdp_comp_sub_create()
- Document MDP3 10-bit format descriptions in "mtk-mdp3-regs.c".
- Add error control for functions mdp_comp_clocks_on and mdp_comp_clock_on.
- Moved function "mtk_mutex_put" from function
  "mdp_comp_destroy"(renamed from mdp_component_deinit) to avoid semantic ambiguity.
- For some allocated parameters, assign a value of NULL after freeing
  to avoid the possibility of repeated use.
- Removed unnecessary timestamp pass flow.
- About parameters passed by the user in function "mdp_try_fmt_mplane", add relevant checks to
  clamp them in a reasonable range to avoid the possibility of overflow

Change since v17:
- Depend on:
  [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=649104
- In response to future CMDQ api changes listed below:
  https://patchwork.kernel.org/project/linux-mediatek/patch/20220608144055.27562-1-chunkuang.hu@kernel.org/
  adjust CMDQ flush and callback flow in MDP3.

Change since v16:
- Rebased on v5.19-rc1
- Depend on:
  [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=646131
- In response to MUTEX changes, adjust API naming and parameters when
  used in function "mdp_path_subfrm_require".
- Remove unnecessary MDP3 phandle in 8183 dts.

Change since v15:
- Depend on:
  [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926
- Split the bindings under ./soc/mediatek into a separate patch.
- Fix data abort in "mdp_auto_release_work"
- Adjust the steps in the function "mdp_cmdq_send" to make the error handling
  more reasonable

Change since v14:
- Rebase on v5.18-rc6
- Depend on:
  [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926
- In response to CMDQ API change, replace the function "cmdq_pkt_flush_async"
  with the standard APIs of mbox
- Fix the description of "mediatek,gce-client-reg" property in MDP3-related
  bindings

Change since v13:
- Rebase on v5.18-rc4
- Depend on:
  [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=636041
- Remove advanced functionality about ISP settings for direct link cases.
- Remove the software designation in the mt8183 dts and
  revise corresponding bindings.

Change since v12:
- Rebase on linux-next
- Depend on:
  [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=630948
- Remove messages related to routing information in MDP3, and leave the related
  settings in MMSYS.
- Remove unnecessary phandle and redundant property in RDMA dt-binding and
  adjust the corresponding driver.
- Revise MDP3 node name in dts. 
- Removed unnecessary functions, mutex and work queue in MDP3 driver
- Fixed format mapping error for V4L2_PIX_FMT_RGB565X

Change since v11:
- Rebase on linux-next tag:next-20220316
- Depend on:
  [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=624281
- Remove redundant hardware index in data-binding suggested by Rob Herring.
- Referring to Rob Herring's suggestion to improve some descriptions in the
  RDMA dt-binding
- Move MDP3 file folder from "./drive/media/platform/mtk-mdp3" to
  "./driver/media/platform/mediatek/mdp3"
- Fixed the V4L2 and MDP color format mapping error in RGB565 which
  checked by Benjamin Gaignard

Change since v10:
- The routing table needs to be discarded, and the calculation result
  on the SCP side is used to write a suitable mux setting for
  1 input port and 2 output ports.
- Adjust dts parsing flow to remove redundant HW IDs.
- Fix memory leak caused by no free path information in function "mdp_cmdq_send".

Change since v9:
- Keep only the MDP3 driver patches and split the remaining mmsys and
  mutex patches into another mail.
- Move mutex mod settings to corresponding driver and make relevant adjustments
  for this in MDP3 driver.
- Fix compile warning reported by kernel test robot.

Change since v8:
- Rebase on v5.16-rc2.
- Refer to Angelo's suggestion, adjust the register writing format to increase
  readability and significance.
- Refer to Angelo's suggestion, adjust or reduce inappropriate debugging
  messages.
- Refer to Rob Herring's suggestion to correct the the binding file
  to make it with the specification.
- Fix compile warning reported by kernel test robot.

Change since v7:
- Rebase on v5.15-rc6.
- Revise several V4L2 M2M settings to pass v4l2-compliance test.
- Integrate those same component dt-binding documents of DRM and MDP, and
  move them under the MMSYS domain.
- Split MMSYS and MUTEX into two different files according to
  their functional properties.

Changes since v6:
- Refactor GCE event to corresponding node.
- Fix dt_binding_check fail.
- Fix compilation errors.

Changes since v5:
- Rebase on v5.14-rc6.
- Move MMSYS/Mutex settings to corresponding driver.
- Revise the software license description and copyright.
- Remove unnecessary enum. or definitions.
- Optimize platform/chip definition conditions.
- Use general printing functions instead of MDP3 private ones.
- Fix compile warning.

Changes since v4:
- Rebase on v5.13-rc1.
- Remove the CMDQ flush flow to match the CMDQ API change.
- Integrate four of MDP's direct-link subcomponents into MDP controller node
  from syscon node to avoid illegal clock usage.
- Rewrite dt-binding in a JSON compatible subset of YAML
- Fix a bit of macro argument precedence.

Changes since v3:
- Rebase on v5.9-rc1.
- modify code for review comment from Rob Herring, cancel multiple nodes using
  same register base situation.
- control IOMMU port through pm runtime get/put to DMA components' device.
- SCP(VPU) driver revision.
- stop queuing jobs(remove flush_workqueue()) after mdp_m2m_release().
- add computation of plane address with data_offset.
- fix scale ratio check issue.
- add default v4l2_format setting.

Changes since v2:
- modify code for review comment from Tomasz Figa & Alexandre Courbot
- review comment from Rob Herring will offer code revision in v4, due to
  it's related to device node modification, will need to modify code
  architecture

Changes since v1:
- modify code for CMDQ v3 API support
- EC ipi cmd migration
- fix compliance test fail item (m2m cmd with -f) due to there is two problem in
  runing all format(-f) cmd:
1. out of memory before test complete
        Due to capture buffer mmap (refcount + 1) after reqbuf but seems
        no corresponding munmap called before device close.
        There are total 12XX items(formats) in format test and each format
        alloc 8 capture/output buffers.
2. unceasingly captureBufs() (randomly)
        Seems the break statement didn't catch the count == 0 situation:
        In v4l2-test-buffers.cpp, function: captureBufs()
                        ...
                        count--;
                        if (!node->is_m2m && !count)
                                break;
        Log is as attachment

Hi,

This patch is used to present Media Data Path 3 (MDP3)
which provided scaling and color format conversion.
support using GCE to write register in critical time limitation.
support V4L2 m2m device control.


Moudy Ho (4):
  dt-binding: mediatek: add bindings for MediaTek MDP3 components
  dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA
  arm64: dts: mt8183: add MediaTek MDP3 nodes
  media: platform: mtk-mdp3: add MediaTek MDP3 driver

 .../bindings/media/mediatek,mdp3-rdma.yaml    |   95 ++
 .../bindings/media/mediatek,mdp3-rsz.yaml     |   77 ++
 .../bindings/media/mediatek,mdp3-wrot.yaml    |   80 ++
 .../bindings/soc/mediatek/mediatek,ccorr.yaml |   68 ++
 .../bindings/soc/mediatek/mediatek,wdma.yaml  |   81 ++
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |   63 +
 drivers/media/platform/mediatek/Kconfig       |    1 +
 drivers/media/platform/mediatek/Makefile      |    1 +
 drivers/media/platform/mediatek/mdp3/Kconfig  |   20 +
 drivers/media/platform/mediatek/mdp3/Makefile |    6 +
 .../platform/mediatek/mdp3/mdp_reg_ccorr.h    |   19 +
 .../platform/mediatek/mdp3/mdp_reg_rdma.h     |   65 ++
 .../platform/mediatek/mdp3/mdp_reg_rsz.h      |   39 +
 .../platform/mediatek/mdp3/mdp_reg_wdma.h     |   47 +
 .../platform/mediatek/mdp3/mdp_reg_wrot.h     |   55 +
 .../platform/mediatek/mdp3/mtk-img-ipi.h      |  290 +++++
 .../platform/mediatek/mdp3/mtk-mdp3-cmdq.c    |  466 ++++++++
 .../platform/mediatek/mdp3/mtk-mdp3-cmdq.h    |   43 +
 .../platform/mediatek/mdp3/mtk-mdp3-comp.c    | 1033 +++++++++++++++++
 .../platform/mediatek/mdp3/mtk-mdp3-comp.h    |  186 +++
 .../platform/mediatek/mdp3/mtk-mdp3-core.c    |  357 ++++++
 .../platform/mediatek/mdp3/mtk-mdp3-core.h    |   94 ++
 .../platform/mediatek/mdp3/mtk-mdp3-m2m.c     |  724 ++++++++++++
 .../platform/mediatek/mdp3/mtk-mdp3-m2m.h     |   48 +
 .../platform/mediatek/mdp3/mtk-mdp3-regs.c    |  735 ++++++++++++
 .../platform/mediatek/mdp3/mtk-mdp3-regs.h    |  373 ++++++
 .../platform/mediatek/mdp3/mtk-mdp3-vpu.c     |  313 +++++
 .../platform/mediatek/mdp3/mtk-mdp3-vpu.h     |   78 ++
 28 files changed, 5457 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
 create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
 create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml
 create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
 create mode 100644 drivers/media/platform/mediatek/mdp3/Kconfig
 create mode 100644 drivers/media/platform/mediatek/mdp3/Makefile
 create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_ccorr.h
 create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_rdma.h
 create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_rsz.h
 create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_wdma.h
 create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_wrot.h
 create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-img-ipi.h
 create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c
 create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.h
 create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c
 create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.h
 create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c
 create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.h
 create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-m2m.c
 create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-m2m.h
 create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-regs.c
 create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-regs.h
 create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-vpu.c
 create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-vpu.h

-- 
2.18.0

Re: [PATCH v28 0/4] media: mediatek: support mdp3 on mt8183 platform

Posted by Matthias Brugger 2 years, 2 months ago

Patches 1, 2 and 3 now applied to v6.0-next/dts64

Thanks!
Matthias

On 23/08/2022 04:37, Moudy Ho wrote:
> Change since v27:
> - Rebase on v6.0-rc2
> - Delete duplicate config in MDP3 Kconfig
> - Relist maintainers in newly added bindings
> - Minor changes in mtk-mdp3-comp.c and mtk-mdp3-reg.c to
>    avoid unnecessary long line warnings.
> - The v4l2-compliance test results are the same as v26.
> 
> Change since v26:
> - Set MMSYS config from "depend on" to "select" in MDP3 Kconfig
>    to avoid compilation errors of various combinations.
> - Fix cast to smaller integer type 'enum mdp_comp_type' from
>    'const void *' in mtk_mdp3_comp.c.
> - Fix sparse warnings in mtk_mdp3_comp.c.
> - The v4l2-compliance test results are the same as v26.
> 
> Change since v25:
> - Add more COMPILE_TEST config in MDP3 Kconfig
> - Adjust unnecessary log level in "mdp_m2m_s_selection" function to
>    avoid spamming the kernel log for userspace errors.
> - The v4l2-compliance test results list is as follows:
> 
> 	v4l2-compliance 1.23.0-4942, 32 bits, 32-bit time_t
> 	v4l2-compliance SHA: 4cf258c24026 2022-07-28 15:43:45
> 	
> 	Compliance test for mtk-mdp3 device /dev/video0:
> 	
> 	Driver Info:
> 		Driver name      : mtk-mdp3
> 		Card type        : MediaTek MDP3
> 		Bus info         : platform:14001000.mdp3-rdma0
> 		Driver version   : 6.0.0
> 		Capabilities     : 0x84204000
> 			Video Memory-to-Memory Multiplanar
> 			Streaming
> 			Extended Pix Format
> 			Device Capabilities
> 		Device Caps      : 0x04204000
> 			Video Memory-to-Memory Multiplanar
> 			Streaming
> 			Extended Pix Format
> 	Required ioctls:
> 		test VIDIOC_QUERYCAP: OK
> 		test invalid ioctls: OK
> 	Allow for multiple opens:
> 		test second /dev/video0 open: OK
> 		test VIDIOC_QUERYCAP: OK
> 		test VIDIOC_G/S_PRIORITY: OK
> 		test for unlimited opens: OK
> 	Debug ioctls:
> 		test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> 		test VIDIOC_LOG_STATUS: OK (Not Supported)
> 	Input ioctls:
> 		test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> 		test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> 		test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> 		test VIDIOC_ENUMAUDIO: OK (Not Supported)
> 		test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> 		test VIDIOC_G/S_AUDIO: OK (Not Supported)
> 		Inputs: 0 Audio Inputs: 0 Tuners: 0
> 	Output ioctls:
> 		test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> 		test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> 		test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> 		test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> 		test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> 		Outputs: 0 Audio Outputs: 0 Modulators: 0
> 	Input/Output configuration ioctls:
> 		test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> 		test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> 		test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> 		test VIDIOC_G/S_EDID: OK (Not Supported)
> 	Control ioctls:
> 		test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> 		test VIDIOC_QUERYCTRL: OK
> 		test VIDIOC_G/S_CTRL: OK
> 		test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> 		test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> 		test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> 		Standard Controls: 4 Private Controls: 0
> 	Format ioctls:
> 		test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> 		test VIDIOC_G/S_PARM: OK (Not Supported)
> 		test VIDIOC_G_FBUF: OK (Not Supported)
> 		test VIDIOC_G_FMT: OK
> 		test VIDIOC_TRY_FMT: OK
> 		test VIDIOC_S_FMT: OK
> 		test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> 		test Cropping: OK
> 		test Composing: OK
> 		test Scaling: OK
> 	Codec ioctls:
> 		test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> 		test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> 		test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> 	Buffer ioctls:
> 		test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> 		test VIDIOC_EXPBUF: OK
> 		test Requests: OK (Not Supported)
> 		test TIME32/64: OK
> 	Test input 0:
> 	Streaming ioctls:
> 		test read/write: OK (Not Supported)
> 		test blocking wait: OK
> 		<snip>
> 		test MMAP (no poll): OK
> 		<snip>
> 		test MMAP (select): OK
> 		<snip>
> 		test MMAP (epoll): OK
> 		test USERPTR (no poll): OK (Not Supported)
> 		test USERPTR (select): OK (Not Supported)
> 		test DMABUF: Cannot test, specify --expbuf-device
> 	Stream using all formats:
> 		<snip>
> 	Total for mtk-mdp3 device /dev/video0: 1592, Succeeded: 1592, Failed: 0, Warnings: 0
> 
> Change since v24:
> - Rebase on v6.0-rc1.
> 
> Change since v23:
> - Rebase on linux-next.
> - Fix compilation error.
> 
> Change since v22:
> - Rebase on linux-next.
> - Fix typo about MDP3 in Kconfig.
> - Adjust some non-essential logs to lower levels.
> 
> Change since v21:
> - Rebase on linux-next.
> - Following Hans suggestion, remove redundant kernel logs and
>    revise a few non-functional code to make it clearer.
> - Remove API abuse to set plane size.
> - Added VPU send message failure error code for previous shortages.
> 
> Change since v20:
> - Rebase on linux-next.
> - Move the MDP3 GCE events to the corresponding node and adjust the
>    relevant driver settings.
> 
> Change since v19:
> - Rebase on linux-next.
> - Export the function "mdp_cmdq_send" suggected by CK.
> - Fix "Macro argument reuse" reported by checkpatch.pl
> 
> Change since v18:
> - Rebase on linux-next.
> - Adjust copyright date of MDP3 driver.
> - Functions renaming as follows:
>    [1] is_output_disable() => is_output_disabled()
>    [2] mdp_component_init() => mdp_comp_config()
>    [3] mdp_component_deinit() => mdp_comp_destroy()
>    [4] mdp_comp_ctx_init() => mdp_comp_ctx_config()
>    [5] mdp_sub_comps_create() => mdp_comp_sub_create()
> - Document MDP3 10-bit format descriptions in "mtk-mdp3-regs.c".
> - Add error control for functions mdp_comp_clocks_on and mdp_comp_clock_on.
> - Moved function "mtk_mutex_put" from function
>    "mdp_comp_destroy"(renamed from mdp_component_deinit) to avoid semantic ambiguity.
> - For some allocated parameters, assign a value of NULL after freeing
>    to avoid the possibility of repeated use.
> - Removed unnecessary timestamp pass flow.
> - About parameters passed by the user in function "mdp_try_fmt_mplane", add relevant checks to
>    clamp them in a reasonable range to avoid the possibility of overflow
> 
> Change since v17:
> - Depend on:
>    [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=649104
> - In response to future CMDQ api changes listed below:
>    https://patchwork.kernel.org/project/linux-mediatek/patch/20220608144055.27562-1-chunkuang.hu@kernel.org/
>    adjust CMDQ flush and callback flow in MDP3.
> 
> Change since v16:
> - Rebased on v5.19-rc1
> - Depend on:
>    [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=646131
> - In response to MUTEX changes, adjust API naming and parameters when
>    used in function "mdp_path_subfrm_require".
> - Remove unnecessary MDP3 phandle in 8183 dts.
> 
> Change since v15:
> - Depend on:
>    [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926
> - Split the bindings under ./soc/mediatek into a separate patch.
> - Fix data abort in "mdp_auto_release_work"
> - Adjust the steps in the function "mdp_cmdq_send" to make the error handling
>    more reasonable
> 
> Change since v14:
> - Rebase on v5.18-rc6
> - Depend on:
>    [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926
> - In response to CMDQ API change, replace the function "cmdq_pkt_flush_async"
>    with the standard APIs of mbox
> - Fix the description of "mediatek,gce-client-reg" property in MDP3-related
>    bindings
> 
> Change since v13:
> - Rebase on v5.18-rc4
> - Depend on:
>    [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=636041
> - Remove advanced functionality about ISP settings for direct link cases.
> - Remove the software designation in the mt8183 dts and
>    revise corresponding bindings.
> 
> Change since v12:
> - Rebase on linux-next
> - Depend on:
>    [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=630948
> - Remove messages related to routing information in MDP3, and leave the related
>    settings in MMSYS.
> - Remove unnecessary phandle and redundant property in RDMA dt-binding and
>    adjust the corresponding driver.
> - Revise MDP3 node name in dts.
> - Removed unnecessary functions, mutex and work queue in MDP3 driver
> - Fixed format mapping error for V4L2_PIX_FMT_RGB565X
> 
> Change since v11:
> - Rebase on linux-next tag:next-20220316
> - Depend on:
>    [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=624281
> - Remove redundant hardware index in data-binding suggested by Rob Herring.
> - Referring to Rob Herring's suggestion to improve some descriptions in the
>    RDMA dt-binding
> - Move MDP3 file folder from "./drive/media/platform/mtk-mdp3" to
>    "./driver/media/platform/mediatek/mdp3"
> - Fixed the V4L2 and MDP color format mapping error in RGB565 which
>    checked by Benjamin Gaignard
> 
> Change since v10:
> - The routing table needs to be discarded, and the calculation result
>    on the SCP side is used to write a suitable mux setting for
>    1 input port and 2 output ports.
> - Adjust dts parsing flow to remove redundant HW IDs.
> - Fix memory leak caused by no free path information in function "mdp_cmdq_send".
> 
> Change since v9:
> - Keep only the MDP3 driver patches and split the remaining mmsys and
>    mutex patches into another mail.
> - Move mutex mod settings to corresponding driver and make relevant adjustments
>    for this in MDP3 driver.
> - Fix compile warning reported by kernel test robot.
> 
> Change since v8:
> - Rebase on v5.16-rc2.
> - Refer to Angelo's suggestion, adjust the register writing format to increase
>    readability and significance.
> - Refer to Angelo's suggestion, adjust or reduce inappropriate debugging
>    messages.
> - Refer to Rob Herring's suggestion to correct the the binding file
>    to make it with the specification.
> - Fix compile warning reported by kernel test robot.
> 
> Change since v7:
> - Rebase on v5.15-rc6.
> - Revise several V4L2 M2M settings to pass v4l2-compliance test.
> - Integrate those same component dt-binding documents of DRM and MDP, and
>    move them under the MMSYS domain.
> - Split MMSYS and MUTEX into two different files according to
>    their functional properties.
> 
> Changes since v6:
> - Refactor GCE event to corresponding node.
> - Fix dt_binding_check fail.
> - Fix compilation errors.
> 
> Changes since v5:
> - Rebase on v5.14-rc6.
> - Move MMSYS/Mutex settings to corresponding driver.
> - Revise the software license description and copyright.
> - Remove unnecessary enum. or definitions.
> - Optimize platform/chip definition conditions.
> - Use general printing functions instead of MDP3 private ones.
> - Fix compile warning.
> 
> Changes since v4:
> - Rebase on v5.13-rc1.
> - Remove the CMDQ flush flow to match the CMDQ API change.
> - Integrate four of MDP's direct-link subcomponents into MDP controller node
>    from syscon node to avoid illegal clock usage.
> - Rewrite dt-binding in a JSON compatible subset of YAML
> - Fix a bit of macro argument precedence.
> 
> Changes since v3:
> - Rebase on v5.9-rc1.
> - modify code for review comment from Rob Herring, cancel multiple nodes using
>    same register base situation.
> - control IOMMU port through pm runtime get/put to DMA components' device.
> - SCP(VPU) driver revision.
> - stop queuing jobs(remove flush_workqueue()) after mdp_m2m_release().
> - add computation of plane address with data_offset.
> - fix scale ratio check issue.
> - add default v4l2_format setting.
> 
> Changes since v2:
> - modify code for review comment from Tomasz Figa & Alexandre Courbot
> - review comment from Rob Herring will offer code revision in v4, due to
>    it's related to device node modification, will need to modify code
>    architecture
> 
> Changes since v1:
> - modify code for CMDQ v3 API support
> - EC ipi cmd migration
> - fix compliance test fail item (m2m cmd with -f) due to there is two problem in
>    runing all format(-f) cmd:
> 1. out of memory before test complete
>          Due to capture buffer mmap (refcount + 1) after reqbuf but seems
>          no corresponding munmap called before device close.
>          There are total 12XX items(formats) in format test and each format
>          alloc 8 capture/output buffers.
> 2. unceasingly captureBufs() (randomly)
>          Seems the break statement didn't catch the count == 0 situation:
>          In v4l2-test-buffers.cpp, function: captureBufs()
>                          ...
>                          count--;
>                          if (!node->is_m2m && !count)
>                                  break;
>          Log is as attachment
> 
> Hi,
> 
> This patch is used to present Media Data Path 3 (MDP3)
> which provided scaling and color format conversion.
> support using GCE to write register in critical time limitation.
> support V4L2 m2m device control.
> 
> 
> Moudy Ho (4):
>    dt-binding: mediatek: add bindings for MediaTek MDP3 components
>    dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA
>    arm64: dts: mt8183: add MediaTek MDP3 nodes
>    media: platform: mtk-mdp3: add MediaTek MDP3 driver
> 
>   .../bindings/media/mediatek,mdp3-rdma.yaml    |   95 ++
>   .../bindings/media/mediatek,mdp3-rsz.yaml     |   77 ++
>   .../bindings/media/mediatek,mdp3-wrot.yaml    |   80 ++
>   .../bindings/soc/mediatek/mediatek,ccorr.yaml |   68 ++
>   .../bindings/soc/mediatek/mediatek,wdma.yaml  |   81 ++
>   arch/arm64/boot/dts/mediatek/mt8183.dtsi      |   63 +
>   drivers/media/platform/mediatek/Kconfig       |    1 +
>   drivers/media/platform/mediatek/Makefile      |    1 +
>   drivers/media/platform/mediatek/mdp3/Kconfig  |   20 +
>   drivers/media/platform/mediatek/mdp3/Makefile |    6 +
>   .../platform/mediatek/mdp3/mdp_reg_ccorr.h    |   19 +
>   .../platform/mediatek/mdp3/mdp_reg_rdma.h     |   65 ++
>   .../platform/mediatek/mdp3/mdp_reg_rsz.h      |   39 +
>   .../platform/mediatek/mdp3/mdp_reg_wdma.h     |   47 +
>   .../platform/mediatek/mdp3/mdp_reg_wrot.h     |   55 +
>   .../platform/mediatek/mdp3/mtk-img-ipi.h      |  290 +++++
>   .../platform/mediatek/mdp3/mtk-mdp3-cmdq.c    |  466 ++++++++
>   .../platform/mediatek/mdp3/mtk-mdp3-cmdq.h    |   43 +
>   .../platform/mediatek/mdp3/mtk-mdp3-comp.c    | 1033 +++++++++++++++++
>   .../platform/mediatek/mdp3/mtk-mdp3-comp.h    |  186 +++
>   .../platform/mediatek/mdp3/mtk-mdp3-core.c    |  357 ++++++
>   .../platform/mediatek/mdp3/mtk-mdp3-core.h    |   94 ++
>   .../platform/mediatek/mdp3/mtk-mdp3-m2m.c     |  724 ++++++++++++
>   .../platform/mediatek/mdp3/mtk-mdp3-m2m.h     |   48 +
>   .../platform/mediatek/mdp3/mtk-mdp3-regs.c    |  735 ++++++++++++
>   .../platform/mediatek/mdp3/mtk-mdp3-regs.h    |  373 ++++++
>   .../platform/mediatek/mdp3/mtk-mdp3-vpu.c     |  313 +++++
>   .../platform/mediatek/mdp3/mtk-mdp3-vpu.h     |   78 ++
>   28 files changed, 5457 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
>   create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
>   create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
>   create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml
>   create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
>   create mode 100644 drivers/media/platform/mediatek/mdp3/Kconfig
>   create mode 100644 drivers/media/platform/mediatek/mdp3/Makefile
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_ccorr.h
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_rdma.h
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_rsz.h
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_wdma.h
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mdp_reg_wrot.h
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-img-ipi.h
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.h
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.h
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.h
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-m2m.c
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-m2m.h
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-regs.c
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-regs.h
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-vpu.c
>   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-vpu.h
>

Re: [PATCH v28 0/4] media: mediatek: support mdp3 on mt8183 platform

Posted by moudy ho 2 years, 2 months ago

On Wed, 2022-08-24 at 13:32 +0200, Matthias Brugger wrote:
> Patches 1, 2 and 3 now applied to v6.0-next/dts64
> 
> Thanks!
> Matthias
> 

Hi Matthias,

Thanks for your kind assistance.

Respectfully,
Moudy

> On 23/08/2022 04:37, Moudy Ho wrote:
> > Change since v27:
> > - Rebase on v6.0-rc2
> > - Delete duplicate config in MDP3 Kconfig
> > - Relist maintainers in newly added bindings
> > - Minor changes in mtk-mdp3-comp.c and mtk-mdp3-reg.c to
> >    avoid unnecessary long line warnings.
> > - The v4l2-compliance test results are the same as v26.
> > 
> > Change since v26:
> > - Set MMSYS config from "depend on" to "select" in MDP3 Kconfig
> >    to avoid compilation errors of various combinations.
> > - Fix cast to smaller integer type 'enum mdp_comp_type' from
> >    'const void *' in mtk_mdp3_comp.c.
> > - Fix sparse warnings in mtk_mdp3_comp.c.
> > - The v4l2-compliance test results are the same as v26.
> > 
> > Change since v25:
> > - Add more COMPILE_TEST config in MDP3 Kconfig
> > - Adjust unnecessary log level in "mdp_m2m_s_selection" function to
> >    avoid spamming the kernel log for userspace errors.
> > - The v4l2-compliance test results list is as follows:
> > 
> > 	v4l2-compliance 1.23.0-4942, 32 bits, 32-bit time_t
> > 	v4l2-compliance SHA: 4cf258c24026 2022-07-28 15:43:45
> > 	
> > 	Compliance test for mtk-mdp3 device /dev/video0:
> > 	
> > 	Driver Info:
> > 		Driver name      : mtk-mdp3
> > 		Card type        : MediaTek MDP3
> > 		Bus info         : platform:14001000.mdp3-rdma0
> > 		Driver version   : 6.0.0
> > 		Capabilities     : 0x84204000
> > 			Video Memory-to-Memory Multiplanar
> > 			Streaming
> > 			Extended Pix Format
> > 			Device Capabilities
> > 		Device Caps      : 0x04204000
> > 			Video Memory-to-Memory Multiplanar
> > 			Streaming
> > 			Extended Pix Format
> > 	Required ioctls:
> > 		test VIDIOC_QUERYCAP: OK
> > 		test invalid ioctls: OK
> > 	Allow for multiple opens:
> > 		test second /dev/video0 open: OK
> > 		test VIDIOC_QUERYCAP: OK
> > 		test VIDIOC_G/S_PRIORITY: OK
> > 		test for unlimited opens: OK
> > 	Debug ioctls:
> > 		test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > 		test VIDIOC_LOG_STATUS: OK (Not Supported)
> > 	Input ioctls:
> > 		test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not
> > Supported)
> > 		test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > 		test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > 		test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > 		test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > 		test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > 		Inputs: 0 Audio Inputs: 0 Tuners: 0
> > 	Output ioctls:
> > 		test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > 		test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > 		test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > 		test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > 		test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > 		Outputs: 0 Audio Outputs: 0 Modulators: 0
> > 	Input/Output configuration ioctls:
> > 		test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > 		test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not
> > Supported)
> > 		test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > 		test VIDIOC_G/S_EDID: OK (Not Supported)
> > 	Control ioctls:
> > 		test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > 		test VIDIOC_QUERYCTRL: OK
> > 		test VIDIOC_G/S_CTRL: OK
> > 		test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > 		test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> > 		test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > 		Standard Controls: 4 Private Controls: 0
> > 	Format ioctls:
> > 		test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > 		test VIDIOC_G/S_PARM: OK (Not Supported)
> > 		test VIDIOC_G_FBUF: OK (Not Supported)
> > 		test VIDIOC_G_FMT: OK
> > 		test VIDIOC_TRY_FMT: OK
> > 		test VIDIOC_S_FMT: OK
> > 		test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > 		test Cropping: OK
> > 		test Composing: OK
> > 		test Scaling: OK
> > 	Codec ioctls:
> > 		test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > 		test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > 		test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> > 	Buffer ioctls:
> > 		test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> > 		test VIDIOC_EXPBUF: OK
> > 		test Requests: OK (Not Supported)
> > 		test TIME32/64: OK
> > 	Test input 0:
> > 	Streaming ioctls:
> > 		test read/write: OK (Not Supported)
> > 		test blocking wait: OK
> > 		<snip>
> > 		test MMAP (no poll): OK
> > 		<snip>
> > 		test MMAP (select): OK
> > 		<snip>
> > 		test MMAP (epoll): OK
> > 		test USERPTR (no poll): OK (Not Supported)
> > 		test USERPTR (select): OK (Not Supported)
> > 		test DMABUF: Cannot test, specify --expbuf-device
> > 	Stream using all formats:
> > 		<snip>
> > 	Total for mtk-mdp3 device /dev/video0: 1592, Succeeded: 1592,
> > Failed: 0, Warnings: 0
> > 
> > Change since v24:
> > - Rebase on v6.0-rc1.
> > 
> > Change since v23:
> > - Rebase on linux-next.
> > - Fix compilation error.
> > 
> > Change since v22:
> > - Rebase on linux-next.
> > - Fix typo about MDP3 in Kconfig.
> > - Adjust some non-essential logs to lower levels.
> > 
> > Change since v21:
> > - Rebase on linux-next.
> > - Following Hans suggestion, remove redundant kernel logs and
> >    revise a few non-functional code to make it clearer.
> > - Remove API abuse to set plane size.
> > - Added VPU send message failure error code for previous shortages.
> > 
> > Change since v20:
> > - Rebase on linux-next.
> > - Move the MDP3 GCE events to the corresponding node and adjust the
> >    relevant driver settings.
> > 
> > Change since v19:
> > - Rebase on linux-next.
> > - Export the function "mdp_cmdq_send" suggected by CK.
> > - Fix "Macro argument reuse" reported by checkpatch.pl
> > 
> > Change since v18:
> > - Rebase on linux-next.
> > - Adjust copyright date of MDP3 driver.
> > - Functions renaming as follows:
> >    [1] is_output_disable() => is_output_disabled()
> >    [2] mdp_component_init() => mdp_comp_config()
> >    [3] mdp_component_deinit() => mdp_comp_destroy()
> >    [4] mdp_comp_ctx_init() => mdp_comp_ctx_config()
> >    [5] mdp_sub_comps_create() => mdp_comp_sub_create()
> > - Document MDP3 10-bit format descriptions in "mtk-mdp3-regs.c".
> > - Add error control for functions mdp_comp_clocks_on and
> > mdp_comp_clock_on.
> > - Moved function "mtk_mutex_put" from function
> >    "mdp_comp_destroy"(renamed from mdp_component_deinit) to avoid
> > semantic ambiguity.
> > - For some allocated parameters, assign a value of NULL after
> > freeing
> >    to avoid the possibility of repeated use.
> > - Removed unnecessary timestamp pass flow.
> > - About parameters passed by the user in function
> > "mdp_try_fmt_mplane", add relevant checks to
> >    clamp them in a reasonable range to avoid the possibility of
> > overflow
> > 
> > Change since v17:
> > - Depend on:
> >    [1] 
> > https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=649104__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8imRuenzc$
> >  
> > - In response to future CMDQ api changes listed below:
> >    
> > https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/patch/20220608144055.27562-1-chunkuang.hu@kernel.org/__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8iul-Frc3$
> >  
> >    adjust CMDQ flush and callback flow in MDP3.
> > 
> > Change since v16:
> > - Rebased on v5.19-rc1
> > - Depend on:
> >    [1] 
> > https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=646131__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ivEMBOlg$
> >  
> > - In response to MUTEX changes, adjust API naming and parameters
> > when
> >    used in function "mdp_path_subfrm_require".
> > - Remove unnecessary MDP3 phandle in 8183 dts.
> > 
> > Change since v15:
> > - Depend on:
> >    [1] 
> > https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ilOzZXlo$
> >  
> > - Split the bindings under ./soc/mediatek into a separate patch.
> > - Fix data abort in "mdp_auto_release_work"
> > - Adjust the steps in the function "mdp_cmdq_send" to make the
> > error handling
> >    more reasonable
> > 
> > Change since v14:
> > - Rebase on v5.18-rc6
> > - Depend on:
> >    [1] 
> > https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ilOzZXlo$
> >  
> > - In response to CMDQ API change, replace the function
> > "cmdq_pkt_flush_async"
> >    with the standard APIs of mbox
> > - Fix the description of "mediatek,gce-client-reg" property in
> > MDP3-related
> >    bindings
> > 
> > Change since v13:
> > - Rebase on v5.18-rc4
> > - Depend on:
> >    [1] 
> > https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=636041__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8itpp6cBE$
> >  
> > - Remove advanced functionality about ISP settings for direct link
> > cases.
> > - Remove the software designation in the mt8183 dts and
> >    revise corresponding bindings.
> > 
> > Change since v12:
> > - Rebase on linux-next
> > - Depend on:
> >    [1] 
> > https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=630948__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8immtSFit$
> >  
> > - Remove messages related to routing information in MDP3, and leave
> > the related
> >    settings in MMSYS.
> > - Remove unnecessary phandle and redundant property in RDMA dt-
> > binding and
> >    adjust the corresponding driver.
> > - Revise MDP3 node name in dts.
> > - Removed unnecessary functions, mutex and work queue in MDP3
> > driver
> > - Fixed format mapping error for V4L2_PIX_FMT_RGB565X
> > 
> > Change since v11:
> > - Rebase on linux-next tag:next-20220316
> > - Depend on:
> >    [1] 
> > https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=624281__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8iu7IwX8m$
> >  
> > - Remove redundant hardware index in data-binding suggested by Rob
> > Herring.
> > - Referring to Rob Herring's suggestion to improve some
> > descriptions in the
> >    RDMA dt-binding
> > - Move MDP3 file folder from "./drive/media/platform/mtk-mdp3" to
> >    "./driver/media/platform/mediatek/mdp3"
> > - Fixed the V4L2 and MDP color format mapping error in RGB565 which
> >    checked by Benjamin Gaignard
> > 
> > Change since v10:
> > - The routing table needs to be discarded, and the calculation
> > result
> >    on the SCP side is used to write a suitable mux setting for
> >    1 input port and 2 output ports.
> > - Adjust dts parsing flow to remove redundant HW IDs.
> > - Fix memory leak caused by no free path information in function
> > "mdp_cmdq_send".
> > 
> > Change since v9:
> > - Keep only the MDP3 driver patches and split the remaining mmsys
> > and
> >    mutex patches into another mail.
> > - Move mutex mod settings to corresponding driver and make relevant
> > adjustments
> >    for this in MDP3 driver.
> > - Fix compile warning reported by kernel test robot.
> > 
> > Change since v8:
> > - Rebase on v5.16-rc2.
> > - Refer to Angelo's suggestion, adjust the register writing format
> > to increase
> >    readability and significance.
> > - Refer to Angelo's suggestion, adjust or reduce inappropriate
> > debugging
> >    messages.
> > - Refer to Rob Herring's suggestion to correct the the binding file
> >    to make it with the specification.
> > - Fix compile warning reported by kernel test robot.
> > 
> > Change since v7:
> > - Rebase on v5.15-rc6.
> > - Revise several V4L2 M2M settings to pass v4l2-compliance test.
> > - Integrate those same component dt-binding documents of DRM and
> > MDP, and
> >    move them under the MMSYS domain.
> > - Split MMSYS and MUTEX into two different files according to
> >    their functional properties.
> > 
> > Changes since v6:
> > - Refactor GCE event to corresponding node.
> > - Fix dt_binding_check fail.
> > - Fix compilation errors.
> > 
> > Changes since v5:
> > - Rebase on v5.14-rc6.
> > - Move MMSYS/Mutex settings to corresponding driver.
> > - Revise the software license description and copyright.
> > - Remove unnecessary enum. or definitions.
> > - Optimize platform/chip definition conditions.
> > - Use general printing functions instead of MDP3 private ones.
> > - Fix compile warning.
> > 
> > Changes since v4:
> > - Rebase on v5.13-rc1.
> > - Remove the CMDQ flush flow to match the CMDQ API change.
> > - Integrate four of MDP's direct-link subcomponents into MDP
> > controller node
> >    from syscon node to avoid illegal clock usage.
> > - Rewrite dt-binding in a JSON compatible subset of YAML
> > - Fix a bit of macro argument precedence.
> > 
> > Changes since v3:
> > - Rebase on v5.9-rc1.
> > - modify code for review comment from Rob Herring, cancel multiple
> > nodes using
> >    same register base situation.
> > - control IOMMU port through pm runtime get/put to DMA components'
> > device.
> > - SCP(VPU) driver revision.
> > - stop queuing jobs(remove flush_workqueue()) after
> > mdp_m2m_release().
> > - add computation of plane address with data_offset.
> > - fix scale ratio check issue.
> > - add default v4l2_format setting.
> > 
> > Changes since v2:
> > - modify code for review comment from Tomasz Figa & Alexandre
> > Courbot
> > - review comment from Rob Herring will offer code revision in v4,
> > due to
> >    it's related to device node modification, will need to modify
> > code
> >    architecture
> > 
> > Changes since v1:
> > - modify code for CMDQ v3 API support
> > - EC ipi cmd migration
> > - fix compliance test fail item (m2m cmd with -f) due to there is
> > two problem in
> >    runing all format(-f) cmd:
> > 1. out of memory before test complete
> >          Due to capture buffer mmap (refcount + 1) after reqbuf but
> > seems
> >          no corresponding munmap called before device close.
> >          There are total 12XX items(formats) in format test and
> > each format
> >          alloc 8 capture/output buffers.
> > 2. unceasingly captureBufs() (randomly)
> >          Seems the break statement didn't catch the count == 0
> > situation:
> >          In v4l2-test-buffers.cpp, function: captureBufs()
> >                          ...
> >                          count--;
> >                          if (!node->is_m2m && !count)
> >                                  break;
> >          Log is as attachment
> > 
> > Hi,
> > 
> > This patch is used to present Media Data Path 3 (MDP3)
> > which provided scaling and color format conversion.
> > support using GCE to write register in critical time limitation.
> > support V4L2 m2m device control.
> > 
> > 
> > Moudy Ho (4):
> >    dt-binding: mediatek: add bindings for MediaTek MDP3 components
> >    dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA
> >    arm64: dts: mt8183: add MediaTek MDP3 nodes
> >    media: platform: mtk-mdp3: add MediaTek MDP3 driver
> > 
> >   .../bindings/media/mediatek,mdp3-rdma.yaml    |   95 ++
> >   .../bindings/media/mediatek,mdp3-rsz.yaml     |   77 ++
> >   .../bindings/media/mediatek,mdp3-wrot.yaml    |   80 ++
> >   .../bindings/soc/mediatek/mediatek,ccorr.yaml |   68 ++
> >   .../bindings/soc/mediatek/mediatek,wdma.yaml  |   81 ++
> >   arch/arm64/boot/dts/mediatek/mt8183.dtsi      |   63 +
> >   drivers/media/platform/mediatek/Kconfig       |    1 +
> >   drivers/media/platform/mediatek/Makefile      |    1 +
> >   drivers/media/platform/mediatek/mdp3/Kconfig  |   20 +
> >   drivers/media/platform/mediatek/mdp3/Makefile |    6 +
> >   .../platform/mediatek/mdp3/mdp_reg_ccorr.h    |   19 +
> >   .../platform/mediatek/mdp3/mdp_reg_rdma.h     |   65 ++
> >   .../platform/mediatek/mdp3/mdp_reg_rsz.h      |   39 +
> >   .../platform/mediatek/mdp3/mdp_reg_wdma.h     |   47 +
> >   .../platform/mediatek/mdp3/mdp_reg_wrot.h     |   55 +
> >   .../platform/mediatek/mdp3/mtk-img-ipi.h      |  290 +++++
> >   .../platform/mediatek/mdp3/mtk-mdp3-cmdq.c    |  466 ++++++++
> >   .../platform/mediatek/mdp3/mtk-mdp3-cmdq.h    |   43 +
> >   .../platform/mediatek/mdp3/mtk-mdp3-comp.c    | 1033
> > +++++++++++++++++
> >   .../platform/mediatek/mdp3/mtk-mdp3-comp.h    |  186 +++
> >   .../platform/mediatek/mdp3/mtk-mdp3-core.c    |  357 ++++++
> >   .../platform/mediatek/mdp3/mtk-mdp3-core.h    |   94 ++
> >   .../platform/mediatek/mdp3/mtk-mdp3-m2m.c     |  724 ++++++++++++
> >   .../platform/mediatek/mdp3/mtk-mdp3-m2m.h     |   48 +
> >   .../platform/mediatek/mdp3/mtk-mdp3-regs.c    |  735 ++++++++++++
> >   .../platform/mediatek/mdp3/mtk-mdp3-regs.h    |  373 ++++++
> >   .../platform/mediatek/mdp3/mtk-mdp3-vpu.c     |  313 +++++
> >   .../platform/mediatek/mdp3/mtk-mdp3-vpu.h     |   78 ++
> >   28 files changed, 5457 insertions(+)
> >   create mode 100644
> > Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
> >   create mode 100644
> > Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
> >   create mode 100644
> > Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
> >   create mode 100644
> > Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml
> >   create mode 100644
> > Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/Kconfig
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/Makefile
> >   create mode 100644
> > drivers/media/platform/mediatek/mdp3/mdp_reg_ccorr.h
> >   create mode 100644
> > drivers/media/platform/mediatek/mdp3/mdp_reg_rdma.h
> >   create mode 100644
> > drivers/media/platform/mediatek/mdp3/mdp_reg_rsz.h
> >   create mode 100644
> > drivers/media/platform/mediatek/mdp3/mdp_reg_wdma.h
> >   create mode 100644
> > drivers/media/platform/mediatek/mdp3/mdp_reg_wrot.h
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-img-
> > ipi.h
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-
> > cmdq.c
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-
> > cmdq.h
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-
> > comp.c
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-
> > comp.h
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-
> > core.c
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-
> > core.h
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-
> > m2m.c
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-
> > m2m.h
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-
> > regs.c
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-
> > regs.h
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-
> > vpu.c
> >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-mdp3-
> > vpu.h
> >

Re: [PATCH v28 0/4] media: mediatek: support mdp3 on mt8183 platform

Posted by moudy ho 2 years, 2 months ago

Hi Matthias,

As a friendly reminder, I found out that patches 1 and 2 are already on
the Hans's git, hopefully it won't cause you any trouble dealing with
this series

Regards,
Moudy

On Thu, 2022-08-25 at 10:06 +0800, moudy ho wrote:
> On Wed, 2022-08-24 at 13:32 +0200, Matthias Brugger wrote:
> > Patches 1, 2 and 3 now applied to v6.0-next/dts64
> > 
> > Thanks!
> > Matthias
> > 
> 
> Hi Matthias,
> 
> Thanks for your kind assistance.
> 
> Respectfully,
> Moudy
> 
> > On 23/08/2022 04:37, Moudy Ho wrote:
> > > Change since v27:
> > > - Rebase on v6.0-rc2
> > > - Delete duplicate config in MDP3 Kconfig
> > > - Relist maintainers in newly added bindings
> > > - Minor changes in mtk-mdp3-comp.c and mtk-mdp3-reg.c to
> > >    avoid unnecessary long line warnings.
> > > - The v4l2-compliance test results are the same as v26.
> > > 
> > > Change since v26:
> > > - Set MMSYS config from "depend on" to "select" in MDP3 Kconfig
> > >    to avoid compilation errors of various combinations.
> > > - Fix cast to smaller integer type 'enum mdp_comp_type' from
> > >    'const void *' in mtk_mdp3_comp.c.
> > > - Fix sparse warnings in mtk_mdp3_comp.c.
> > > - The v4l2-compliance test results are the same as v26.
> > > 
> > > Change since v25:
> > > - Add more COMPILE_TEST config in MDP3 Kconfig
> > > - Adjust unnecessary log level in "mdp_m2m_s_selection" function
> > > to
> > >    avoid spamming the kernel log for userspace errors.
> > > - The v4l2-compliance test results list is as follows:
> > > 
> > > 	v4l2-compliance 1.23.0-4942, 32 bits, 32-bit time_t
> > > 	v4l2-compliance SHA: 4cf258c24026 2022-07-28 15:43:45
> > > 	
> > > 	Compliance test for mtk-mdp3 device /dev/video0:
> > > 	
> > > 	Driver Info:
> > > 		Driver name      : mtk-mdp3
> > > 		Card type        : MediaTek MDP3
> > > 		Bus info         : platform:14001000.mdp3-rdma0
> > > 		Driver version   : 6.0.0
> > > 		Capabilities     : 0x84204000
> > > 			Video Memory-to-Memory Multiplanar
> > > 			Streaming
> > > 			Extended Pix Format
> > > 			Device Capabilities
> > > 		Device Caps      : 0x04204000
> > > 			Video Memory-to-Memory Multiplanar
> > > 			Streaming
> > > 			Extended Pix Format
> > > 	Required ioctls:
> > > 		test VIDIOC_QUERYCAP: OK
> > > 		test invalid ioctls: OK
> > > 	Allow for multiple opens:
> > > 		test second /dev/video0 open: OK
> > > 		test VIDIOC_QUERYCAP: OK
> > > 		test VIDIOC_G/S_PRIORITY: OK
> > > 		test for unlimited opens: OK
> > > 	Debug ioctls:
> > > 		test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > > 		test VIDIOC_LOG_STATUS: OK (Not Supported)
> > > 	Input ioctls:
> > > 		test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not
> > > Supported)
> > > 		test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > > 		test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > > 		test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > > 		test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > > 		test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > > 		Inputs: 0 Audio Inputs: 0 Tuners: 0
> > > 	Output ioctls:
> > > 		test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > > 		test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > > 		test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > > 		test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > > 		test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > > 		Outputs: 0 Audio Outputs: 0 Modulators: 0
> > > 	Input/Output configuration ioctls:
> > > 		test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > > 		test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not
> > > Supported)
> > > 		test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > > 		test VIDIOC_G/S_EDID: OK (Not Supported)
> > > 	Control ioctls:
> > > 		test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > > 		test VIDIOC_QUERYCTRL: OK
> > > 		test VIDIOC_G/S_CTRL: OK
> > > 		test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > > 		test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> > > 		test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > > 		Standard Controls: 4 Private Controls: 0
> > > 	Format ioctls:
> > > 		test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > > 		test VIDIOC_G/S_PARM: OK (Not Supported)
> > > 		test VIDIOC_G_FBUF: OK (Not Supported)
> > > 		test VIDIOC_G_FMT: OK
> > > 		test VIDIOC_TRY_FMT: OK
> > > 		test VIDIOC_S_FMT: OK
> > > 		test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > > 		test Cropping: OK
> > > 		test Composing: OK
> > > 		test Scaling: OK
> > > 	Codec ioctls:
> > > 		test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > > 		test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > > 		test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> > > 	Buffer ioctls:
> > > 		test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> > > 		test VIDIOC_EXPBUF: OK
> > > 		test Requests: OK (Not Supported)
> > > 		test TIME32/64: OK
> > > 	Test input 0:
> > > 	Streaming ioctls:
> > > 		test read/write: OK (Not Supported)
> > > 		test blocking wait: OK
> > > 		<snip>
> > > 		test MMAP (no poll): OK
> > > 		<snip>
> > > 		test MMAP (select): OK
> > > 		<snip>
> > > 		test MMAP (epoll): OK
> > > 		test USERPTR (no poll): OK (Not Supported)
> > > 		test USERPTR (select): OK (Not Supported)
> > > 		test DMABUF: Cannot test, specify --expbuf-device
> > > 	Stream using all formats:
> > > 		<snip>
> > > 	Total for mtk-mdp3 device /dev/video0: 1592, Succeeded: 1592,
> > > Failed: 0, Warnings: 0
> > > 
> > > Change since v24:
> > > - Rebase on v6.0-rc1.
> > > 
> > > Change since v23:
> > > - Rebase on linux-next.
> > > - Fix compilation error.
> > > 
> > > Change since v22:
> > > - Rebase on linux-next.
> > > - Fix typo about MDP3 in Kconfig.
> > > - Adjust some non-essential logs to lower levels.
> > > 
> > > Change since v21:
> > > - Rebase on linux-next.
> > > - Following Hans suggestion, remove redundant kernel logs and
> > >    revise a few non-functional code to make it clearer.
> > > - Remove API abuse to set plane size.
> > > - Added VPU send message failure error code for previous
> > > shortages.
> > > 
> > > Change since v20:
> > > - Rebase on linux-next.
> > > - Move the MDP3 GCE events to the corresponding node and adjust
> > > the
> > >    relevant driver settings.
> > > 
> > > Change since v19:
> > > - Rebase on linux-next.
> > > - Export the function "mdp_cmdq_send" suggected by CK.
> > > - Fix "Macro argument reuse" reported by checkpatch.pl
> > > 
> > > Change since v18:
> > > - Rebase on linux-next.
> > > - Adjust copyright date of MDP3 driver.
> > > - Functions renaming as follows:
> > >    [1] is_output_disable() => is_output_disabled()
> > >    [2] mdp_component_init() => mdp_comp_config()
> > >    [3] mdp_component_deinit() => mdp_comp_destroy()
> > >    [4] mdp_comp_ctx_init() => mdp_comp_ctx_config()
> > >    [5] mdp_sub_comps_create() => mdp_comp_sub_create()
> > > - Document MDP3 10-bit format descriptions in "mtk-mdp3-regs.c".
> > > - Add error control for functions mdp_comp_clocks_on and
> > > mdp_comp_clock_on.
> > > - Moved function "mtk_mutex_put" from function
> > >    "mdp_comp_destroy"(renamed from mdp_component_deinit) to avoid
> > > semantic ambiguity.
> > > - For some allocated parameters, assign a value of NULL after
> > > freeing
> > >    to avoid the possibility of repeated use.
> > > - Removed unnecessary timestamp pass flow.
> > > - About parameters passed by the user in function
> > > "mdp_try_fmt_mplane", add relevant checks to
> > >    clamp them in a reasonable range to avoid the possibility of
> > > overflow
> > > 
> > > Change since v17:
> > > - Depend on:
> > >    [1] 
> > > 
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=649104__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8imRuenzc$
> > >  
> > > - In response to future CMDQ api changes listed below:
> > >    
> > > 
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/patch/20220608144055.27562-1-chunkuang.hu@kernel.org/__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8iul-Frc3$
> > >  
> > >    adjust CMDQ flush and callback flow in MDP3.
> > > 
> > > Change since v16:
> > > - Rebased on v5.19-rc1
> > > - Depend on:
> > >    [1] 
> > > 
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=646131__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ivEMBOlg$
> > >  
> > > - In response to MUTEX changes, adjust API naming and parameters
> > > when
> > >    used in function "mdp_path_subfrm_require".
> > > - Remove unnecessary MDP3 phandle in 8183 dts.
> > > 
> > > Change since v15:
> > > - Depend on:
> > >    [1] 
> > > 
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ilOzZXlo$
> > >  
> > > - Split the bindings under ./soc/mediatek into a separate patch.
> > > - Fix data abort in "mdp_auto_release_work"
> > > - Adjust the steps in the function "mdp_cmdq_send" to make the
> > > error handling
> > >    more reasonable
> > > 
> > > Change since v14:
> > > - Rebase on v5.18-rc6
> > > - Depend on:
> > >    [1] 
> > > 
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ilOzZXlo$
> > >  
> > > - In response to CMDQ API change, replace the function
> > > "cmdq_pkt_flush_async"
> > >    with the standard APIs of mbox
> > > - Fix the description of "mediatek,gce-client-reg" property in
> > > MDP3-related
> > >    bindings
> > > 
> > > Change since v13:
> > > - Rebase on v5.18-rc4
> > > - Depend on:
> > >    [1] 
> > > 
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=636041__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8itpp6cBE$
> > >  
> > > - Remove advanced functionality about ISP settings for direct
> > > link
> > > cases.
> > > - Remove the software designation in the mt8183 dts and
> > >    revise corresponding bindings.
> > > 
> > > Change since v12:
> > > - Rebase on linux-next
> > > - Depend on:
> > >    [1] 
> > > 
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=630948__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8immtSFit$
> > >  
> > > - Remove messages related to routing information in MDP3, and
> > > leave
> > > the related
> > >    settings in MMSYS.
> > > - Remove unnecessary phandle and redundant property in RDMA dt-
> > > binding and
> > >    adjust the corresponding driver.
> > > - Revise MDP3 node name in dts.
> > > - Removed unnecessary functions, mutex and work queue in MDP3
> > > driver
> > > - Fixed format mapping error for V4L2_PIX_FMT_RGB565X
> > > 
> > > Change since v11:
> > > - Rebase on linux-next tag:next-20220316
> > > - Depend on:
> > >    [1] 
> > > 
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=624281__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8iu7IwX8m$
> > >  
> > > - Remove redundant hardware index in data-binding suggested by
> > > Rob
> > > Herring.
> > > - Referring to Rob Herring's suggestion to improve some
> > > descriptions in the
> > >    RDMA dt-binding
> > > - Move MDP3 file folder from "./drive/media/platform/mtk-mdp3" to
> > >    "./driver/media/platform/mediatek/mdp3"
> > > - Fixed the V4L2 and MDP color format mapping error in RGB565
> > > which
> > >    checked by Benjamin Gaignard
> > > 
> > > Change since v10:
> > > - The routing table needs to be discarded, and the calculation
> > > result
> > >    on the SCP side is used to write a suitable mux setting for
> > >    1 input port and 2 output ports.
> > > - Adjust dts parsing flow to remove redundant HW IDs.
> > > - Fix memory leak caused by no free path information in function
> > > "mdp_cmdq_send".
> > > 
> > > Change since v9:
> > > - Keep only the MDP3 driver patches and split the remaining mmsys
> > > and
> > >    mutex patches into another mail.
> > > - Move mutex mod settings to corresponding driver and make
> > > relevant
> > > adjustments
> > >    for this in MDP3 driver.
> > > - Fix compile warning reported by kernel test robot.
> > > 
> > > Change since v8:
> > > - Rebase on v5.16-rc2.
> > > - Refer to Angelo's suggestion, adjust the register writing
> > > format
> > > to increase
> > >    readability and significance.
> > > - Refer to Angelo's suggestion, adjust or reduce inappropriate
> > > debugging
> > >    messages.
> > > - Refer to Rob Herring's suggestion to correct the the binding
> > > file
> > >    to make it with the specification.
> > > - Fix compile warning reported by kernel test robot.
> > > 
> > > Change since v7:
> > > - Rebase on v5.15-rc6.
> > > - Revise several V4L2 M2M settings to pass v4l2-compliance test.
> > > - Integrate those same component dt-binding documents of DRM and
> > > MDP, and
> > >    move them under the MMSYS domain.
> > > - Split MMSYS and MUTEX into two different files according to
> > >    their functional properties.
> > > 
> > > Changes since v6:
> > > - Refactor GCE event to corresponding node.
> > > - Fix dt_binding_check fail.
> > > - Fix compilation errors.
> > > 
> > > Changes since v5:
> > > - Rebase on v5.14-rc6.
> > > - Move MMSYS/Mutex settings to corresponding driver.
> > > - Revise the software license description and copyright.
> > > - Remove unnecessary enum. or definitions.
> > > - Optimize platform/chip definition conditions.
> > > - Use general printing functions instead of MDP3 private ones.
> > > - Fix compile warning.
> > > 
> > > Changes since v4:
> > > - Rebase on v5.13-rc1.
> > > - Remove the CMDQ flush flow to match the CMDQ API change.
> > > - Integrate four of MDP's direct-link subcomponents into MDP
> > > controller node
> > >    from syscon node to avoid illegal clock usage.
> > > - Rewrite dt-binding in a JSON compatible subset of YAML
> > > - Fix a bit of macro argument precedence.
> > > 
> > > Changes since v3:
> > > - Rebase on v5.9-rc1.
> > > - modify code for review comment from Rob Herring, cancel
> > > multiple
> > > nodes using
> > >    same register base situation.
> > > - control IOMMU port through pm runtime get/put to DMA
> > > components'
> > > device.
> > > - SCP(VPU) driver revision.
> > > - stop queuing jobs(remove flush_workqueue()) after
> > > mdp_m2m_release().
> > > - add computation of plane address with data_offset.
> > > - fix scale ratio check issue.
> > > - add default v4l2_format setting.
> > > 
> > > Changes since v2:
> > > - modify code for review comment from Tomasz Figa & Alexandre
> > > Courbot
> > > - review comment from Rob Herring will offer code revision in v4,
> > > due to
> > >    it's related to device node modification, will need to modify
> > > code
> > >    architecture
> > > 
> > > Changes since v1:
> > > - modify code for CMDQ v3 API support
> > > - EC ipi cmd migration
> > > - fix compliance test fail item (m2m cmd with -f) due to there is
> > > two problem in
> > >    runing all format(-f) cmd:
> > > 1. out of memory before test complete
> > >          Due to capture buffer mmap (refcount + 1) after reqbuf
> > > but
> > > seems
> > >          no corresponding munmap called before device close.
> > >          There are total 12XX items(formats) in format test and
> > > each format
> > >          alloc 8 capture/output buffers.
> > > 2. unceasingly captureBufs() (randomly)
> > >          Seems the break statement didn't catch the count == 0
> > > situation:
> > >          In v4l2-test-buffers.cpp, function: captureBufs()
> > >                          ...
> > >                          count--;
> > >                          if (!node->is_m2m && !count)
> > >                                  break;
> > >          Log is as attachment
> > > 
> > > Hi,
> > > 
> > > This patch is used to present Media Data Path 3 (MDP3)
> > > which provided scaling and color format conversion.
> > > support using GCE to write register in critical time limitation.
> > > support V4L2 m2m device control.
> > > 
> > > 
> > > Moudy Ho (4):
> > >    dt-binding: mediatek: add bindings for MediaTek MDP3
> > > components
> > >    dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA
> > >    arm64: dts: mt8183: add MediaTek MDP3 nodes
> > >    media: platform: mtk-mdp3: add MediaTek MDP3 driver
> > > 
> > >   .../bindings/media/mediatek,mdp3-rdma.yaml    |   95 ++
> > >   .../bindings/media/mediatek,mdp3-rsz.yaml     |   77 ++
> > >   .../bindings/media/mediatek,mdp3-wrot.yaml    |   80 ++
> > >   .../bindings/soc/mediatek/mediatek,ccorr.yaml |   68 ++
> > >   .../bindings/soc/mediatek/mediatek,wdma.yaml  |   81 ++
> > >   arch/arm64/boot/dts/mediatek/mt8183.dtsi      |   63 +
> > >   drivers/media/platform/mediatek/Kconfig       |    1 +
> > >   drivers/media/platform/mediatek/Makefile      |    1 +
> > >   drivers/media/platform/mediatek/mdp3/Kconfig  |   20 +
> > >   drivers/media/platform/mediatek/mdp3/Makefile |    6 +
> > >   .../platform/mediatek/mdp3/mdp_reg_ccorr.h    |   19 +
> > >   .../platform/mediatek/mdp3/mdp_reg_rdma.h     |   65 ++
> > >   .../platform/mediatek/mdp3/mdp_reg_rsz.h      |   39 +
> > >   .../platform/mediatek/mdp3/mdp_reg_wdma.h     |   47 +
> > >   .../platform/mediatek/mdp3/mdp_reg_wrot.h     |   55 +
> > >   .../platform/mediatek/mdp3/mtk-img-ipi.h      |  290 +++++
> > >   .../platform/mediatek/mdp3/mtk-mdp3-cmdq.c    |  466 ++++++++
> > >   .../platform/mediatek/mdp3/mtk-mdp3-cmdq.h    |   43 +
> > >   .../platform/mediatek/mdp3/mtk-mdp3-comp.c    | 1033
> > > +++++++++++++++++
> > >   .../platform/mediatek/mdp3/mtk-mdp3-comp.h    |  186 +++
> > >   .../platform/mediatek/mdp3/mtk-mdp3-core.c    |  357 ++++++
> > >   .../platform/mediatek/mdp3/mtk-mdp3-core.h    |   94 ++
> > >   .../platform/mediatek/mdp3/mtk-mdp3-m2m.c     |  724
> > > ++++++++++++
> > >   .../platform/mediatek/mdp3/mtk-mdp3-m2m.h     |   48 +
> > >   .../platform/mediatek/mdp3/mtk-mdp3-regs.c    |  735
> > > ++++++++++++
> > >   .../platform/mediatek/mdp3/mtk-mdp3-regs.h    |  373 ++++++
> > >   .../platform/mediatek/mdp3/mtk-mdp3-vpu.c     |  313 +++++
> > >   .../platform/mediatek/mdp3/mtk-mdp3-vpu.h     |   78 ++
> > >   28 files changed, 5457 insertions(+)
> > >   create mode 100644
> > > Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
> > >   create mode 100644
> > > Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
> > >   create mode 100644
> > > Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
> > >   create mode 100644
> > > Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yam
> > > l
> > >   create mode 100644
> > > Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
> > >   create mode 100644 drivers/media/platform/mediatek/mdp3/Kconfig
> > >   create mode 100644
> > > drivers/media/platform/mediatek/mdp3/Makefile
> > >   create mode 100644
> > > drivers/media/platform/mediatek/mdp3/mdp_reg_ccorr.h
> > >   create mode 100644
> > > drivers/media/platform/mediatek/mdp3/mdp_reg_rdma.h
> > >   create mode 100644
> > > drivers/media/platform/mediatek/mdp3/mdp_reg_rsz.h
> > >   create mode 100644
> > > drivers/media/platform/mediatek/mdp3/mdp_reg_wdma.h
> > >   create mode 100644
> > > drivers/media/platform/mediatek/mdp3/mdp_reg_wrot.h
> > >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > img-
> > > ipi.h
> > >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > cmdq.c
> > >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > cmdq.h
> > >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > comp.c
> > >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > comp.h
> > >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > core.c
> > >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > core.h
> > >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > m2m.c
> > >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > m2m.h
> > >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > regs.c
> > >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > regs.h
> > >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > vpu.c
> > >   create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > vpu.h
> > >

Re: [PATCH v28 0/4] media: mediatek: support mdp3 on mt8183 platform

Posted by Matthias Brugger 2 years, 2 months ago


On 25/08/2022 04:41, moudy ho wrote:
> Hi Matthias,
> 
> As a friendly reminder, I found out that patches 1 and 2 are already on
> the Hans's git, hopefully it won't cause you any trouble dealing with
> this series
> 

Thanks for the heads-up I removed them from my tree now.

Regards,
Matthias

> Regards,
> Moudy
> 
> On Thu, 2022-08-25 at 10:06 +0800, moudy ho wrote:
>> On Wed, 2022-08-24 at 13:32 +0200, Matthias Brugger wrote:
>>> Patches 1, 2 and 3 now applied to v6.0-next/dts64
>>>
>>> Thanks!
>>> Matthias
>>>
>>
>> Hi Matthias,
>>
>> Thanks for your kind assistance.
>>
>> Respectfully,
>> Moudy
>>
>>> On 23/08/2022 04:37, Moudy Ho wrote:
>>>> Change since v27:
>>>> - Rebase on v6.0-rc2
>>>> - Delete duplicate config in MDP3 Kconfig
>>>> - Relist maintainers in newly added bindings
>>>> - Minor changes in mtk-mdp3-comp.c and mtk-mdp3-reg.c to
>>>>     avoid unnecessary long line warnings.
>>>> - The v4l2-compliance test results are the same as v26.
>>>>
>>>> Change since v26:
>>>> - Set MMSYS config from "depend on" to "select" in MDP3 Kconfig
>>>>     to avoid compilation errors of various combinations.
>>>> - Fix cast to smaller integer type 'enum mdp_comp_type' from
>>>>     'const void *' in mtk_mdp3_comp.c.
>>>> - Fix sparse warnings in mtk_mdp3_comp.c.
>>>> - The v4l2-compliance test results are the same as v26.
>>>>
>>>> Change since v25:
>>>> - Add more COMPILE_TEST config in MDP3 Kconfig
>>>> - Adjust unnecessary log level in "mdp_m2m_s_selection" function
>>>> to
>>>>     avoid spamming the kernel log for userspace errors.
>>>> - The v4l2-compliance test results list is as follows:
>>>>
>>>> 	v4l2-compliance 1.23.0-4942, 32 bits, 32-bit time_t
>>>> 	v4l2-compliance SHA: 4cf258c24026 2022-07-28 15:43:45
>>>> 	
>>>> 	Compliance test for mtk-mdp3 device /dev/video0:
>>>> 	
>>>> 	Driver Info:
>>>> 		Driver name      : mtk-mdp3
>>>> 		Card type        : MediaTek MDP3
>>>> 		Bus info         : platform:14001000.mdp3-rdma0
>>>> 		Driver version   : 6.0.0
>>>> 		Capabilities     : 0x84204000
>>>> 			Video Memory-to-Memory Multiplanar
>>>> 			Streaming
>>>> 			Extended Pix Format
>>>> 			Device Capabilities
>>>> 		Device Caps      : 0x04204000
>>>> 			Video Memory-to-Memory Multiplanar
>>>> 			Streaming
>>>> 			Extended Pix Format
>>>> 	Required ioctls:
>>>> 		test VIDIOC_QUERYCAP: OK
>>>> 		test invalid ioctls: OK
>>>> 	Allow for multiple opens:
>>>> 		test second /dev/video0 open: OK
>>>> 		test VIDIOC_QUERYCAP: OK
>>>> 		test VIDIOC_G/S_PRIORITY: OK
>>>> 		test for unlimited opens: OK
>>>> 	Debug ioctls:
>>>> 		test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>>> 		test VIDIOC_LOG_STATUS: OK (Not Supported)
>>>> 	Input ioctls:
>>>> 		test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not
>>>> Supported)
>>>> 		test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>> 		test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>>> 		test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>>> 		test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>>>> 		test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>>> 		Inputs: 0 Audio Inputs: 0 Tuners: 0
>>>> 	Output ioctls:
>>>> 		test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>>> 		test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>> 		test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>>> 		test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>>> 		test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>>> 		Outputs: 0 Audio Outputs: 0 Modulators: 0
>>>> 	Input/Output configuration ioctls:
>>>> 		test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>>>> 		test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not
>>>> Supported)
>>>> 		test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>>> 		test VIDIOC_G/S_EDID: OK (Not Supported)
>>>> 	Control ioctls:
>>>> 		test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>>>> 		test VIDIOC_QUERYCTRL: OK
>>>> 		test VIDIOC_G/S_CTRL: OK
>>>> 		test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>>>> 		test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>>>> 		test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>>> 		Standard Controls: 4 Private Controls: 0
>>>> 	Format ioctls:
>>>> 		test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>>> 		test VIDIOC_G/S_PARM: OK (Not Supported)
>>>> 		test VIDIOC_G_FBUF: OK (Not Supported)
>>>> 		test VIDIOC_G_FMT: OK
>>>> 		test VIDIOC_TRY_FMT: OK
>>>> 		test VIDIOC_S_FMT: OK
>>>> 		test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>>> 		test Cropping: OK
>>>> 		test Composing: OK
>>>> 		test Scaling: OK
>>>> 	Codec ioctls:
>>>> 		test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>>>> 		test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>>> 		test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>>> 	Buffer ioctls:
>>>> 		test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>>> 		test VIDIOC_EXPBUF: OK
>>>> 		test Requests: OK (Not Supported)
>>>> 		test TIME32/64: OK
>>>> 	Test input 0:
>>>> 	Streaming ioctls:
>>>> 		test read/write: OK (Not Supported)
>>>> 		test blocking wait: OK
>>>> 		<snip>
>>>> 		test MMAP (no poll): OK
>>>> 		<snip>
>>>> 		test MMAP (select): OK
>>>> 		<snip>
>>>> 		test MMAP (epoll): OK
>>>> 		test USERPTR (no poll): OK (Not Supported)
>>>> 		test USERPTR (select): OK (Not Supported)
>>>> 		test DMABUF: Cannot test, specify --expbuf-device
>>>> 	Stream using all formats:
>>>> 		<snip>
>>>> 	Total for mtk-mdp3 device /dev/video0: 1592, Succeeded: 1592,
>>>> Failed: 0, Warnings: 0
>>>>
>>>> Change since v24:
>>>> - Rebase on v6.0-rc1.
>>>>
>>>> Change since v23:
>>>> - Rebase on linux-next.
>>>> - Fix compilation error.
>>>>
>>>> Change since v22:
>>>> - Rebase on linux-next.
>>>> - Fix typo about MDP3 in Kconfig.
>>>> - Adjust some non-essential logs to lower levels.
>>>>
>>>> Change since v21:
>>>> - Rebase on linux-next.
>>>> - Following Hans suggestion, remove redundant kernel logs and
>>>>     revise a few non-functional code to make it clearer.
>>>> - Remove API abuse to set plane size.
>>>> - Added VPU send message failure error code for previous
>>>> shortages.
>>>>
>>>> Change since v20:
>>>> - Rebase on linux-next.
>>>> - Move the MDP3 GCE events to the corresponding node and adjust
>>>> the
>>>>     relevant driver settings.
>>>>
>>>> Change since v19:
>>>> - Rebase on linux-next.
>>>> - Export the function "mdp_cmdq_send" suggected by CK.
>>>> - Fix "Macro argument reuse" reported by checkpatch.pl
>>>>
>>>> Change since v18:
>>>> - Rebase on linux-next.
>>>> - Adjust copyright date of MDP3 driver.
>>>> - Functions renaming as follows:
>>>>     [1] is_output_disable() => is_output_disabled()
>>>>     [2] mdp_component_init() => mdp_comp_config()
>>>>     [3] mdp_component_deinit() => mdp_comp_destroy()
>>>>     [4] mdp_comp_ctx_init() => mdp_comp_ctx_config()
>>>>     [5] mdp_sub_comps_create() => mdp_comp_sub_create()
>>>> - Document MDP3 10-bit format descriptions in "mtk-mdp3-regs.c".
>>>> - Add error control for functions mdp_comp_clocks_on and
>>>> mdp_comp_clock_on.
>>>> - Moved function "mtk_mutex_put" from function
>>>>     "mdp_comp_destroy"(renamed from mdp_component_deinit) to avoid
>>>> semantic ambiguity.
>>>> - For some allocated parameters, assign a value of NULL after
>>>> freeing
>>>>     to avoid the possibility of repeated use.
>>>> - Removed unnecessary timestamp pass flow.
>>>> - About parameters passed by the user in function
>>>> "mdp_try_fmt_mplane", add relevant checks to
>>>>     clamp them in a reasonable range to avoid the possibility of
>>>> overflow
>>>>
>>>> Change since v17:
>>>> - Depend on:
>>>>     [1]
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=649104__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8imRuenzc$
>>>>   
>>>> - In response to future CMDQ api changes listed below:
>>>>     
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/patch/20220608144055.27562-1-chunkuang.hu@kernel.org/__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8iul-Frc3$
>>>>   
>>>>     adjust CMDQ flush and callback flow in MDP3.
>>>>
>>>> Change since v16:
>>>> - Rebased on v5.19-rc1
>>>> - Depend on:
>>>>     [1]
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=646131__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ivEMBOlg$
>>>>   
>>>> - In response to MUTEX changes, adjust API naming and parameters
>>>> when
>>>>     used in function "mdp_path_subfrm_require".
>>>> - Remove unnecessary MDP3 phandle in 8183 dts.
>>>>
>>>> Change since v15:
>>>> - Depend on:
>>>>     [1]
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ilOzZXlo$
>>>>   
>>>> - Split the bindings under ./soc/mediatek into a separate patch.
>>>> - Fix data abort in "mdp_auto_release_work"
>>>> - Adjust the steps in the function "mdp_cmdq_send" to make the
>>>> error handling
>>>>     more reasonable
>>>>
>>>> Change since v14:
>>>> - Rebase on v5.18-rc6
>>>> - Depend on:
>>>>     [1]
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ilOzZXlo$
>>>>   
>>>> - In response to CMDQ API change, replace the function
>>>> "cmdq_pkt_flush_async"
>>>>     with the standard APIs of mbox
>>>> - Fix the description of "mediatek,gce-client-reg" property in
>>>> MDP3-related
>>>>     bindings
>>>>
>>>> Change since v13:
>>>> - Rebase on v5.18-rc4
>>>> - Depend on:
>>>>     [1]
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=636041__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8itpp6cBE$
>>>>   
>>>> - Remove advanced functionality about ISP settings for direct
>>>> link
>>>> cases.
>>>> - Remove the software designation in the mt8183 dts and
>>>>     revise corresponding bindings.
>>>>
>>>> Change since v12:
>>>> - Rebase on linux-next
>>>> - Depend on:
>>>>     [1]
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=630948__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8immtSFit$
>>>>   
>>>> - Remove messages related to routing information in MDP3, and
>>>> leave
>>>> the related
>>>>     settings in MMSYS.
>>>> - Remove unnecessary phandle and redundant property in RDMA dt-
>>>> binding and
>>>>     adjust the corresponding driver.
>>>> - Revise MDP3 node name in dts.
>>>> - Removed unnecessary functions, mutex and work queue in MDP3
>>>> driver
>>>> - Fixed format mapping error for V4L2_PIX_FMT_RGB565X
>>>>
>>>> Change since v11:
>>>> - Rebase on linux-next tag:next-20220316
>>>> - Depend on:
>>>>     [1]
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=624281__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8iu7IwX8m$
>>>>   
>>>> - Remove redundant hardware index in data-binding suggested by
>>>> Rob
>>>> Herring.
>>>> - Referring to Rob Herring's suggestion to improve some
>>>> descriptions in the
>>>>     RDMA dt-binding
>>>> - Move MDP3 file folder from "./drive/media/platform/mtk-mdp3" to
>>>>     "./driver/media/platform/mediatek/mdp3"
>>>> - Fixed the V4L2 and MDP color format mapping error in RGB565
>>>> which
>>>>     checked by Benjamin Gaignard
>>>>
>>>> Change since v10:
>>>> - The routing table needs to be discarded, and the calculation
>>>> result
>>>>     on the SCP side is used to write a suitable mux setting for
>>>>     1 input port and 2 output ports.
>>>> - Adjust dts parsing flow to remove redundant HW IDs.
>>>> - Fix memory leak caused by no free path information in function
>>>> "mdp_cmdq_send".
>>>>
>>>> Change since v9:
>>>> - Keep only the MDP3 driver patches and split the remaining mmsys
>>>> and
>>>>     mutex patches into another mail.
>>>> - Move mutex mod settings to corresponding driver and make
>>>> relevant
>>>> adjustments
>>>>     for this in MDP3 driver.
>>>> - Fix compile warning reported by kernel test robot.
>>>>
>>>> Change since v8:
>>>> - Rebase on v5.16-rc2.
>>>> - Refer to Angelo's suggestion, adjust the register writing
>>>> format
>>>> to increase
>>>>     readability and significance.
>>>> - Refer to Angelo's suggestion, adjust or reduce inappropriate
>>>> debugging
>>>>     messages.
>>>> - Refer to Rob Herring's suggestion to correct the the binding
>>>> file
>>>>     to make it with the specification.
>>>> - Fix compile warning reported by kernel test robot.
>>>>
>>>> Change since v7:
>>>> - Rebase on v5.15-rc6.
>>>> - Revise several V4L2 M2M settings to pass v4l2-compliance test.
>>>> - Integrate those same component dt-binding documents of DRM and
>>>> MDP, and
>>>>     move them under the MMSYS domain.
>>>> - Split MMSYS and MUTEX into two different files according to
>>>>     their functional properties.
>>>>
>>>> Changes since v6:
>>>> - Refactor GCE event to corresponding node.
>>>> - Fix dt_binding_check fail.
>>>> - Fix compilation errors.
>>>>
>>>> Changes since v5:
>>>> - Rebase on v5.14-rc6.
>>>> - Move MMSYS/Mutex settings to corresponding driver.
>>>> - Revise the software license description and copyright.
>>>> - Remove unnecessary enum. or definitions.
>>>> - Optimize platform/chip definition conditions.
>>>> - Use general printing functions instead of MDP3 private ones.
>>>> - Fix compile warning.
>>>>
>>>> Changes since v4:
>>>> - Rebase on v5.13-rc1.
>>>> - Remove the CMDQ flush flow to match the CMDQ API change.
>>>> - Integrate four of MDP's direct-link subcomponents into MDP
>>>> controller node
>>>>     from syscon node to avoid illegal clock usage.
>>>> - Rewrite dt-binding in a JSON compatible subset of YAML
>>>> - Fix a bit of macro argument precedence.
>>>>
>>>> Changes since v3:
>>>> - Rebase on v5.9-rc1.
>>>> - modify code for review comment from Rob Herring, cancel
>>>> multiple
>>>> nodes using
>>>>     same register base situation.
>>>> - control IOMMU port through pm runtime get/put to DMA
>>>> components'
>>>> device.
>>>> - SCP(VPU) driver revision.
>>>> - stop queuing jobs(remove flush_workqueue()) after
>>>> mdp_m2m_release().
>>>> - add computation of plane address with data_offset.
>>>> - fix scale ratio check issue.
>>>> - add default v4l2_format setting.
>>>>
>>>> Changes since v2:
>>>> - modify code for review comment from Tomasz Figa & Alexandre
>>>> Courbot
>>>> - review comment from Rob Herring will offer code revision in v4,
>>>> due to
>>>>     it's related to device node modification, will need to modify
>>>> code
>>>>     architecture
>>>>
>>>> Changes since v1:
>>>> - modify code for CMDQ v3 API support
>>>> - EC ipi cmd migration
>>>> - fix compliance test fail item (m2m cmd with -f) due to there is
>>>> two problem in
>>>>     runing all format(-f) cmd:
>>>> 1. out of memory before test complete
>>>>           Due to capture buffer mmap (refcount + 1) after reqbuf
>>>> but
>>>> seems
>>>>           no corresponding munmap called before device close.
>>>>           There are total 12XX items(formats) in format test and
>>>> each format
>>>>           alloc 8 capture/output buffers.
>>>> 2. unceasingly captureBufs() (randomly)
>>>>           Seems the break statement didn't catch the count == 0
>>>> situation:
>>>>           In v4l2-test-buffers.cpp, function: captureBufs()
>>>>                           ...
>>>>                           count--;
>>>>                           if (!node->is_m2m && !count)
>>>>                                   break;
>>>>           Log is as attachment
>>>>
>>>> Hi,
>>>>
>>>> This patch is used to present Media Data Path 3 (MDP3)
>>>> which provided scaling and color format conversion.
>>>> support using GCE to write register in critical time limitation.
>>>> support V4L2 m2m device control.
>>>>
>>>>
>>>> Moudy Ho (4):
>>>>     dt-binding: mediatek: add bindings for MediaTek MDP3
>>>> components
>>>>     dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA
>>>>     arm64: dts: mt8183: add MediaTek MDP3 nodes
>>>>     media: platform: mtk-mdp3: add MediaTek MDP3 driver
>>>>
>>>>    .../bindings/media/mediatek,mdp3-rdma.yaml    |   95 ++
>>>>    .../bindings/media/mediatek,mdp3-rsz.yaml     |   77 ++
>>>>    .../bindings/media/mediatek,mdp3-wrot.yaml    |   80 ++
>>>>    .../bindings/soc/mediatek/mediatek,ccorr.yaml |   68 ++
>>>>    .../bindings/soc/mediatek/mediatek,wdma.yaml  |   81 ++
>>>>    arch/arm64/boot/dts/mediatek/mt8183.dtsi      |   63 +
>>>>    drivers/media/platform/mediatek/Kconfig       |    1 +
>>>>    drivers/media/platform/mediatek/Makefile      |    1 +
>>>>    drivers/media/platform/mediatek/mdp3/Kconfig  |   20 +
>>>>    drivers/media/platform/mediatek/mdp3/Makefile |    6 +
>>>>    .../platform/mediatek/mdp3/mdp_reg_ccorr.h    |   19 +
>>>>    .../platform/mediatek/mdp3/mdp_reg_rdma.h     |   65 ++
>>>>    .../platform/mediatek/mdp3/mdp_reg_rsz.h      |   39 +
>>>>    .../platform/mediatek/mdp3/mdp_reg_wdma.h     |   47 +
>>>>    .../platform/mediatek/mdp3/mdp_reg_wrot.h     |   55 +
>>>>    .../platform/mediatek/mdp3/mtk-img-ipi.h      |  290 +++++
>>>>    .../platform/mediatek/mdp3/mtk-mdp3-cmdq.c    |  466 ++++++++
>>>>    .../platform/mediatek/mdp3/mtk-mdp3-cmdq.h    |   43 +
>>>>    .../platform/mediatek/mdp3/mtk-mdp3-comp.c    | 1033
>>>> +++++++++++++++++
>>>>    .../platform/mediatek/mdp3/mtk-mdp3-comp.h    |  186 +++
>>>>    .../platform/mediatek/mdp3/mtk-mdp3-core.c    |  357 ++++++
>>>>    .../platform/mediatek/mdp3/mtk-mdp3-core.h    |   94 ++
>>>>    .../platform/mediatek/mdp3/mtk-mdp3-m2m.c     |  724
>>>> ++++++++++++
>>>>    .../platform/mediatek/mdp3/mtk-mdp3-m2m.h     |   48 +
>>>>    .../platform/mediatek/mdp3/mtk-mdp3-regs.c    |  735
>>>> ++++++++++++
>>>>    .../platform/mediatek/mdp3/mtk-mdp3-regs.h    |  373 ++++++
>>>>    .../platform/mediatek/mdp3/mtk-mdp3-vpu.c     |  313 +++++
>>>>    .../platform/mediatek/mdp3/mtk-mdp3-vpu.h     |   78 ++
>>>>    28 files changed, 5457 insertions(+)
>>>>    create mode 100644
>>>> Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
>>>>    create mode 100644
>>>> Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
>>>>    create mode 100644
>>>> Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
>>>>    create mode 100644
>>>> Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yam
>>>> l
>>>>    create mode 100644
>>>> Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/Kconfig
>>>>    create mode 100644
>>>> drivers/media/platform/mediatek/mdp3/Makefile
>>>>    create mode 100644
>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_ccorr.h
>>>>    create mode 100644
>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_rdma.h
>>>>    create mode 100644
>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_rsz.h
>>>>    create mode 100644
>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_wdma.h
>>>>    create mode 100644
>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_wrot.h
>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> img-
>>>> ipi.h
>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> cmdq.c
>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> cmdq.h
>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> comp.c
>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> comp.h
>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> core.c
>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> core.h
>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> m2m.c
>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> m2m.h
>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> regs.c
>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> regs.h
>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> vpu.c
>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> vpu.h
>>>>
>

Re: [PATCH v28 0/4] media: mediatek: support mdp3 on mt8183 platform

Posted by Hans Verkuil 2 years, 2 months ago

Hi Matthias,

On 8/25/22 15:07, Matthias Brugger wrote:
> 
> 
> On 25/08/2022 04:41, moudy ho wrote:
>> Hi Matthias,
>>
>> As a friendly reminder, I found out that patches 1 and 2 are already on
>> the Hans's git, hopefully it won't cause you any trouble dealing with
>> this series
>>
> 
> Thanks for the heads-up I removed them from my tree now.

Thank you, I'll merge them via the media tree. Traditionally media bindings
go through our tree together with the drivers.

Regards,

	Hans

> 
> Regards,
> Matthias
> 
>> Regards,
>> Moudy
>>
>> On Thu, 2022-08-25 at 10:06 +0800, moudy ho wrote:
>>> On Wed, 2022-08-24 at 13:32 +0200, Matthias Brugger wrote:
>>>> Patches 1, 2 and 3 now applied to v6.0-next/dts64
>>>>
>>>> Thanks!
>>>> Matthias
>>>>
>>>
>>> Hi Matthias,
>>>
>>> Thanks for your kind assistance.
>>>
>>> Respectfully,
>>> Moudy
>>>
>>>> On 23/08/2022 04:37, Moudy Ho wrote:
>>>>> Change since v27:
>>>>> - Rebase on v6.0-rc2
>>>>> - Delete duplicate config in MDP3 Kconfig
>>>>> - Relist maintainers in newly added bindings
>>>>> - Minor changes in mtk-mdp3-comp.c and mtk-mdp3-reg.c to
>>>>>     avoid unnecessary long line warnings.
>>>>> - The v4l2-compliance test results are the same as v26.
>>>>>
>>>>> Change since v26:
>>>>> - Set MMSYS config from "depend on" to "select" in MDP3 Kconfig
>>>>>     to avoid compilation errors of various combinations.
>>>>> - Fix cast to smaller integer type 'enum mdp_comp_type' from
>>>>>     'const void *' in mtk_mdp3_comp.c.
>>>>> - Fix sparse warnings in mtk_mdp3_comp.c.
>>>>> - The v4l2-compliance test results are the same as v26.
>>>>>
>>>>> Change since v25:
>>>>> - Add more COMPILE_TEST config in MDP3 Kconfig
>>>>> - Adjust unnecessary log level in "mdp_m2m_s_selection" function
>>>>> to
>>>>>     avoid spamming the kernel log for userspace errors.
>>>>> - The v4l2-compliance test results list is as follows:
>>>>>
>>>>> 	v4l2-compliance 1.23.0-4942, 32 bits, 32-bit time_t
>>>>> 	v4l2-compliance SHA: 4cf258c24026 2022-07-28 15:43:45
>>>>> 	
>>>>> 	Compliance test for mtk-mdp3 device /dev/video0:
>>>>> 	
>>>>> 	Driver Info:
>>>>> 		Driver name      : mtk-mdp3
>>>>> 		Card type        : MediaTek MDP3
>>>>> 		Bus info         : platform:14001000.mdp3-rdma0
>>>>> 		Driver version   : 6.0.0
>>>>> 		Capabilities     : 0x84204000
>>>>> 			Video Memory-to-Memory Multiplanar
>>>>> 			Streaming
>>>>> 			Extended Pix Format
>>>>> 			Device Capabilities
>>>>> 		Device Caps      : 0x04204000
>>>>> 			Video Memory-to-Memory Multiplanar
>>>>> 			Streaming
>>>>> 			Extended Pix Format
>>>>> 	Required ioctls:
>>>>> 		test VIDIOC_QUERYCAP: OK
>>>>> 		test invalid ioctls: OK
>>>>> 	Allow for multiple opens:
>>>>> 		test second /dev/video0 open: OK
>>>>> 		test VIDIOC_QUERYCAP: OK
>>>>> 		test VIDIOC_G/S_PRIORITY: OK
>>>>> 		test for unlimited opens: OK
>>>>> 	Debug ioctls:
>>>>> 		test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>>>> 		test VIDIOC_LOG_STATUS: OK (Not Supported)
>>>>> 	Input ioctls:
>>>>> 		test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not
>>>>> Supported)
>>>>> 		test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>>> 		test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>>>> 		test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>>>> 		test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>>>>> 		test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>>>> 		Inputs: 0 Audio Inputs: 0 Tuners: 0
>>>>> 	Output ioctls:
>>>>> 		test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>>>> 		test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>>> 		test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>>>> 		test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>>>> 		test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>>>> 		Outputs: 0 Audio Outputs: 0 Modulators: 0
>>>>> 	Input/Output configuration ioctls:
>>>>> 		test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>>>>> 		test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not
>>>>> Supported)
>>>>> 		test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>>>> 		test VIDIOC_G/S_EDID: OK (Not Supported)
>>>>> 	Control ioctls:
>>>>> 		test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>>>>> 		test VIDIOC_QUERYCTRL: OK
>>>>> 		test VIDIOC_G/S_CTRL: OK
>>>>> 		test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>>>>> 		test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>>>>> 		test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>>>> 		Standard Controls: 4 Private Controls: 0
>>>>> 	Format ioctls:
>>>>> 		test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>>>> 		test VIDIOC_G/S_PARM: OK (Not Supported)
>>>>> 		test VIDIOC_G_FBUF: OK (Not Supported)
>>>>> 		test VIDIOC_G_FMT: OK
>>>>> 		test VIDIOC_TRY_FMT: OK
>>>>> 		test VIDIOC_S_FMT: OK
>>>>> 		test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>>>> 		test Cropping: OK
>>>>> 		test Composing: OK
>>>>> 		test Scaling: OK
>>>>> 	Codec ioctls:
>>>>> 		test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>>>>> 		test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>>>> 		test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>>>> 	Buffer ioctls:
>>>>> 		test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>>>> 		test VIDIOC_EXPBUF: OK
>>>>> 		test Requests: OK (Not Supported)
>>>>> 		test TIME32/64: OK
>>>>> 	Test input 0:
>>>>> 	Streaming ioctls:
>>>>> 		test read/write: OK (Not Supported)
>>>>> 		test blocking wait: OK
>>>>> 		<snip>
>>>>> 		test MMAP (no poll): OK
>>>>> 		<snip>
>>>>> 		test MMAP (select): OK
>>>>> 		<snip>
>>>>> 		test MMAP (epoll): OK
>>>>> 		test USERPTR (no poll): OK (Not Supported)
>>>>> 		test USERPTR (select): OK (Not Supported)
>>>>> 		test DMABUF: Cannot test, specify --expbuf-device
>>>>> 	Stream using all formats:
>>>>> 		<snip>
>>>>> 	Total for mtk-mdp3 device /dev/video0: 1592, Succeeded: 1592,
>>>>> Failed: 0, Warnings: 0
>>>>>
>>>>> Change since v24:
>>>>> - Rebase on v6.0-rc1.
>>>>>
>>>>> Change since v23:
>>>>> - Rebase on linux-next.
>>>>> - Fix compilation error.
>>>>>
>>>>> Change since v22:
>>>>> - Rebase on linux-next.
>>>>> - Fix typo about MDP3 in Kconfig.
>>>>> - Adjust some non-essential logs to lower levels.
>>>>>
>>>>> Change since v21:
>>>>> - Rebase on linux-next.
>>>>> - Following Hans suggestion, remove redundant kernel logs and
>>>>>     revise a few non-functional code to make it clearer.
>>>>> - Remove API abuse to set plane size.
>>>>> - Added VPU send message failure error code for previous
>>>>> shortages.
>>>>>
>>>>> Change since v20:
>>>>> - Rebase on linux-next.
>>>>> - Move the MDP3 GCE events to the corresponding node and adjust
>>>>> the
>>>>>     relevant driver settings.
>>>>>
>>>>> Change since v19:
>>>>> - Rebase on linux-next.
>>>>> - Export the function "mdp_cmdq_send" suggected by CK.
>>>>> - Fix "Macro argument reuse" reported by checkpatch.pl
>>>>>
>>>>> Change since v18:
>>>>> - Rebase on linux-next.
>>>>> - Adjust copyright date of MDP3 driver.
>>>>> - Functions renaming as follows:
>>>>>     [1] is_output_disable() => is_output_disabled()
>>>>>     [2] mdp_component_init() => mdp_comp_config()
>>>>>     [3] mdp_component_deinit() => mdp_comp_destroy()
>>>>>     [4] mdp_comp_ctx_init() => mdp_comp_ctx_config()
>>>>>     [5] mdp_sub_comps_create() => mdp_comp_sub_create()
>>>>> - Document MDP3 10-bit format descriptions in "mtk-mdp3-regs.c".
>>>>> - Add error control for functions mdp_comp_clocks_on and
>>>>> mdp_comp_clock_on.
>>>>> - Moved function "mtk_mutex_put" from function
>>>>>     "mdp_comp_destroy"(renamed from mdp_component_deinit) to avoid
>>>>> semantic ambiguity.
>>>>> - For some allocated parameters, assign a value of NULL after
>>>>> freeing
>>>>>     to avoid the possibility of repeated use.
>>>>> - Removed unnecessary timestamp pass flow.
>>>>> - About parameters passed by the user in function
>>>>> "mdp_try_fmt_mplane", add relevant checks to
>>>>>     clamp them in a reasonable range to avoid the possibility of
>>>>> overflow
>>>>>
>>>>> Change since v17:
>>>>> - Depend on:
>>>>>     [1]
>>>>>
>> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=649104__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8imRuenzc$
>>>>>   
>>>>> - In response to future CMDQ api changes listed below:
>>>>>     
>>>>>
>> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/patch/20220608144055.27562-1-chunkuang.hu@kernel.org/__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8iul-Frc3$
>>>>>   
>>>>>     adjust CMDQ flush and callback flow in MDP3.
>>>>>
>>>>> Change since v16:
>>>>> - Rebased on v5.19-rc1
>>>>> - Depend on:
>>>>>     [1]
>>>>>
>> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=646131__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ivEMBOlg$
>>>>>   
>>>>> - In response to MUTEX changes, adjust API naming and parameters
>>>>> when
>>>>>     used in function "mdp_path_subfrm_require".
>>>>> - Remove unnecessary MDP3 phandle in 8183 dts.
>>>>>
>>>>> Change since v15:
>>>>> - Depend on:
>>>>>     [1]
>>>>>
>> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ilOzZXlo$
>>>>>   
>>>>> - Split the bindings under ./soc/mediatek into a separate patch.
>>>>> - Fix data abort in "mdp_auto_release_work"
>>>>> - Adjust the steps in the function "mdp_cmdq_send" to make the
>>>>> error handling
>>>>>     more reasonable
>>>>>
>>>>> Change since v14:
>>>>> - Rebase on v5.18-rc6
>>>>> - Depend on:
>>>>>     [1]
>>>>>
>> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ilOzZXlo$
>>>>>   
>>>>> - In response to CMDQ API change, replace the function
>>>>> "cmdq_pkt_flush_async"
>>>>>     with the standard APIs of mbox
>>>>> - Fix the description of "mediatek,gce-client-reg" property in
>>>>> MDP3-related
>>>>>     bindings
>>>>>
>>>>> Change since v13:
>>>>> - Rebase on v5.18-rc4
>>>>> - Depend on:
>>>>>     [1]
>>>>>
>> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=636041__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8itpp6cBE$
>>>>>   
>>>>> - Remove advanced functionality about ISP settings for direct
>>>>> link
>>>>> cases.
>>>>> - Remove the software designation in the mt8183 dts and
>>>>>     revise corresponding bindings.
>>>>>
>>>>> Change since v12:
>>>>> - Rebase on linux-next
>>>>> - Depend on:
>>>>>     [1]
>>>>>
>> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=630948__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8immtSFit$
>>>>>   
>>>>> - Remove messages related to routing information in MDP3, and
>>>>> leave
>>>>> the related
>>>>>     settings in MMSYS.
>>>>> - Remove unnecessary phandle and redundant property in RDMA dt-
>>>>> binding and
>>>>>     adjust the corresponding driver.
>>>>> - Revise MDP3 node name in dts.
>>>>> - Removed unnecessary functions, mutex and work queue in MDP3
>>>>> driver
>>>>> - Fixed format mapping error for V4L2_PIX_FMT_RGB565X
>>>>>
>>>>> Change since v11:
>>>>> - Rebase on linux-next tag:next-20220316
>>>>> - Depend on:
>>>>>     [1]
>>>>>
>> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=624281__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8iu7IwX8m$
>>>>>   
>>>>> - Remove redundant hardware index in data-binding suggested by
>>>>> Rob
>>>>> Herring.
>>>>> - Referring to Rob Herring's suggestion to improve some
>>>>> descriptions in the
>>>>>     RDMA dt-binding
>>>>> - Move MDP3 file folder from "./drive/media/platform/mtk-mdp3" to
>>>>>     "./driver/media/platform/mediatek/mdp3"
>>>>> - Fixed the V4L2 and MDP color format mapping error in RGB565
>>>>> which
>>>>>     checked by Benjamin Gaignard
>>>>>
>>>>> Change since v10:
>>>>> - The routing table needs to be discarded, and the calculation
>>>>> result
>>>>>     on the SCP side is used to write a suitable mux setting for
>>>>>     1 input port and 2 output ports.
>>>>> - Adjust dts parsing flow to remove redundant HW IDs.
>>>>> - Fix memory leak caused by no free path information in function
>>>>> "mdp_cmdq_send".
>>>>>
>>>>> Change since v9:
>>>>> - Keep only the MDP3 driver patches and split the remaining mmsys
>>>>> and
>>>>>     mutex patches into another mail.
>>>>> - Move mutex mod settings to corresponding driver and make
>>>>> relevant
>>>>> adjustments
>>>>>     for this in MDP3 driver.
>>>>> - Fix compile warning reported by kernel test robot.
>>>>>
>>>>> Change since v8:
>>>>> - Rebase on v5.16-rc2.
>>>>> - Refer to Angelo's suggestion, adjust the register writing
>>>>> format
>>>>> to increase
>>>>>     readability and significance.
>>>>> - Refer to Angelo's suggestion, adjust or reduce inappropriate
>>>>> debugging
>>>>>     messages.
>>>>> - Refer to Rob Herring's suggestion to correct the the binding
>>>>> file
>>>>>     to make it with the specification.
>>>>> - Fix compile warning reported by kernel test robot.
>>>>>
>>>>> Change since v7:
>>>>> - Rebase on v5.15-rc6.
>>>>> - Revise several V4L2 M2M settings to pass v4l2-compliance test.
>>>>> - Integrate those same component dt-binding documents of DRM and
>>>>> MDP, and
>>>>>     move them under the MMSYS domain.
>>>>> - Split MMSYS and MUTEX into two different files according to
>>>>>     their functional properties.
>>>>>
>>>>> Changes since v6:
>>>>> - Refactor GCE event to corresponding node.
>>>>> - Fix dt_binding_check fail.
>>>>> - Fix compilation errors.
>>>>>
>>>>> Changes since v5:
>>>>> - Rebase on v5.14-rc6.
>>>>> - Move MMSYS/Mutex settings to corresponding driver.
>>>>> - Revise the software license description and copyright.
>>>>> - Remove unnecessary enum. or definitions.
>>>>> - Optimize platform/chip definition conditions.
>>>>> - Use general printing functions instead of MDP3 private ones.
>>>>> - Fix compile warning.
>>>>>
>>>>> Changes since v4:
>>>>> - Rebase on v5.13-rc1.
>>>>> - Remove the CMDQ flush flow to match the CMDQ API change.
>>>>> - Integrate four of MDP's direct-link subcomponents into MDP
>>>>> controller node
>>>>>     from syscon node to avoid illegal clock usage.
>>>>> - Rewrite dt-binding in a JSON compatible subset of YAML
>>>>> - Fix a bit of macro argument precedence.
>>>>>
>>>>> Changes since v3:
>>>>> - Rebase on v5.9-rc1.
>>>>> - modify code for review comment from Rob Herring, cancel
>>>>> multiple
>>>>> nodes using
>>>>>     same register base situation.
>>>>> - control IOMMU port through pm runtime get/put to DMA
>>>>> components'
>>>>> device.
>>>>> - SCP(VPU) driver revision.
>>>>> - stop queuing jobs(remove flush_workqueue()) after
>>>>> mdp_m2m_release().
>>>>> - add computation of plane address with data_offset.
>>>>> - fix scale ratio check issue.
>>>>> - add default v4l2_format setting.
>>>>>
>>>>> Changes since v2:
>>>>> - modify code for review comment from Tomasz Figa & Alexandre
>>>>> Courbot
>>>>> - review comment from Rob Herring will offer code revision in v4,
>>>>> due to
>>>>>     it's related to device node modification, will need to modify
>>>>> code
>>>>>     architecture
>>>>>
>>>>> Changes since v1:
>>>>> - modify code for CMDQ v3 API support
>>>>> - EC ipi cmd migration
>>>>> - fix compliance test fail item (m2m cmd with -f) due to there is
>>>>> two problem in
>>>>>     runing all format(-f) cmd:
>>>>> 1. out of memory before test complete
>>>>>           Due to capture buffer mmap (refcount + 1) after reqbuf
>>>>> but
>>>>> seems
>>>>>           no corresponding munmap called before device close.
>>>>>           There are total 12XX items(formats) in format test and
>>>>> each format
>>>>>           alloc 8 capture/output buffers.
>>>>> 2. unceasingly captureBufs() (randomly)
>>>>>           Seems the break statement didn't catch the count == 0
>>>>> situation:
>>>>>           In v4l2-test-buffers.cpp, function: captureBufs()
>>>>>                           ...
>>>>>                           count--;
>>>>>                           if (!node->is_m2m && !count)
>>>>>                                   break;
>>>>>           Log is as attachment
>>>>>
>>>>> Hi,
>>>>>
>>>>> This patch is used to present Media Data Path 3 (MDP3)
>>>>> which provided scaling and color format conversion.
>>>>> support using GCE to write register in critical time limitation.
>>>>> support V4L2 m2m device control.
>>>>>
>>>>>
>>>>> Moudy Ho (4):
>>>>>     dt-binding: mediatek: add bindings for MediaTek MDP3
>>>>> components
>>>>>     dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA
>>>>>     arm64: dts: mt8183: add MediaTek MDP3 nodes
>>>>>     media: platform: mtk-mdp3: add MediaTek MDP3 driver
>>>>>
>>>>>    .../bindings/media/mediatek,mdp3-rdma.yaml    |   95 ++
>>>>>    .../bindings/media/mediatek,mdp3-rsz.yaml     |   77 ++
>>>>>    .../bindings/media/mediatek,mdp3-wrot.yaml    |   80 ++
>>>>>    .../bindings/soc/mediatek/mediatek,ccorr.yaml |   68 ++
>>>>>    .../bindings/soc/mediatek/mediatek,wdma.yaml  |   81 ++
>>>>>    arch/arm64/boot/dts/mediatek/mt8183.dtsi      |   63 +
>>>>>    drivers/media/platform/mediatek/Kconfig       |    1 +
>>>>>    drivers/media/platform/mediatek/Makefile      |    1 +
>>>>>    drivers/media/platform/mediatek/mdp3/Kconfig  |   20 +
>>>>>    drivers/media/platform/mediatek/mdp3/Makefile |    6 +
>>>>>    .../platform/mediatek/mdp3/mdp_reg_ccorr.h    |   19 +
>>>>>    .../platform/mediatek/mdp3/mdp_reg_rdma.h     |   65 ++
>>>>>    .../platform/mediatek/mdp3/mdp_reg_rsz.h      |   39 +
>>>>>    .../platform/mediatek/mdp3/mdp_reg_wdma.h     |   47 +
>>>>>    .../platform/mediatek/mdp3/mdp_reg_wrot.h     |   55 +
>>>>>    .../platform/mediatek/mdp3/mtk-img-ipi.h      |  290 +++++
>>>>>    .../platform/mediatek/mdp3/mtk-mdp3-cmdq.c    |  466 ++++++++
>>>>>    .../platform/mediatek/mdp3/mtk-mdp3-cmdq.h    |   43 +
>>>>>    .../platform/mediatek/mdp3/mtk-mdp3-comp.c    | 1033
>>>>> +++++++++++++++++
>>>>>    .../platform/mediatek/mdp3/mtk-mdp3-comp.h    |  186 +++
>>>>>    .../platform/mediatek/mdp3/mtk-mdp3-core.c    |  357 ++++++
>>>>>    .../platform/mediatek/mdp3/mtk-mdp3-core.h    |   94 ++
>>>>>    .../platform/mediatek/mdp3/mtk-mdp3-m2m.c     |  724
>>>>> ++++++++++++
>>>>>    .../platform/mediatek/mdp3/mtk-mdp3-m2m.h     |   48 +
>>>>>    .../platform/mediatek/mdp3/mtk-mdp3-regs.c    |  735
>>>>> ++++++++++++
>>>>>    .../platform/mediatek/mdp3/mtk-mdp3-regs.h    |  373 ++++++
>>>>>    .../platform/mediatek/mdp3/mtk-mdp3-vpu.c     |  313 +++++
>>>>>    .../platform/mediatek/mdp3/mtk-mdp3-vpu.h     |   78 ++
>>>>>    28 files changed, 5457 insertions(+)
>>>>>    create mode 100644
>>>>> Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
>>>>>    create mode 100644
>>>>> Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
>>>>>    create mode 100644
>>>>> Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
>>>>>    create mode 100644
>>>>> Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yam
>>>>> l
>>>>>    create mode 100644
>>>>> Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
>>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/Kconfig
>>>>>    create mode 100644
>>>>> drivers/media/platform/mediatek/mdp3/Makefile
>>>>>    create mode 100644
>>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_ccorr.h
>>>>>    create mode 100644
>>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_rdma.h
>>>>>    create mode 100644
>>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_rsz.h
>>>>>    create mode 100644
>>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_wdma.h
>>>>>    create mode 100644
>>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_wrot.h
>>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>>> img-
>>>>> ipi.h
>>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>>> mdp3-
>>>>> cmdq.c
>>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>>> mdp3-
>>>>> cmdq.h
>>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>>> mdp3-
>>>>> comp.c
>>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>>> mdp3-
>>>>> comp.h
>>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>>> mdp3-
>>>>> core.c
>>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>>> mdp3-
>>>>> core.h
>>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>>> mdp3-
>>>>> m2m.c
>>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>>> mdp3-
>>>>> m2m.h
>>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>>> mdp3-
>>>>> regs.c
>>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>>> mdp3-
>>>>> regs.h
>>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>>> mdp3-
>>>>> vpu.c
>>>>>    create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>>> mdp3-
>>>>> vpu.h
>>>>>
>>