It's fine to call dev_err_probe() in ->probe() when error code is known.
Convert the driver to use dev_err_probe().

Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
---
 v5: delete the redundant ret and %d.
 drivers/pwm/pwm-rockchip.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index f3647b317152..a5af859217c1 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c
@@ -328,22 +328,16 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 	else
 		pc->pclk = pc->clk;
 
-	if (IS_ERR(pc->pclk)) {
-		ret = PTR_ERR(pc->pclk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Can't get APB clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(pc->pclk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(pc->pclk), "Can't get APB clk\n");
 
 	ret = clk_prepare_enable(pc->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Can't prepare enable PWM clk: %d\n", ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "Can't prepare enable PWM clk\n");
 
 	ret = clk_prepare_enable(pc->pclk);
 	if (ret) {
-		dev_err(&pdev->dev, "Can't prepare enable APB clk: %d\n", ret);
+		dev_err_probe(&pdev->dev, ret, "Can't prepare enable APB clk\n");
 		goto err_clk;
 	}
 
@@ -360,7 +354,7 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 
 	ret = pwmchip_add(&pc->chip);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		dev_err_probe(&pdev->dev, ret, "pwmchip_add() failed\n");
 		goto err_pclk;
 	}
 
-- 
2.20.1

On Mon, Aug 22, 2022 at 04:18:48PM +0800, zhaoxiao wrote:
> It's fine to call dev_err_probe() in ->probe() when error code is known.
> Convert the driver to use dev_err_probe().
> 
> Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
> ---
>  v5: delete the redundant ret and %d.
>  drivers/pwm/pwm-rockchip.c | 18 ++++++------------
>  1 file changed, 6 insertions(+), 12 deletions(-)

Applied, thanks.

Thierry

On Mon, Aug 22, 2022 at 04:18:48PM +0800, zhaoxiao wrote:
> It's fine to call dev_err_probe() in ->probe() when error code is known.
> Convert the driver to use dev_err_probe().
> 
> Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>

Looks fine now:

Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |