Delete the redundant word 'more'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
---
 drivers/usb/serial/mct_u232.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
index e3d09a83cab1..f79a1f1b6a98 100644
--- a/drivers/usb/serial/mct_u232.h
+++ b/drivers/usb/serial/mct_u232.h
@@ -273,13 +273,13 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
  *  Bit 5: Data Set Ready (DSR). Reflects the state of the DSR line on the UART.
  *  Bit 4: Clear To Send (CTS). Reflects the state of the CTS line on the UART.
  *  Bit 3: Delta Data Carrier Detect (DDCD). Set to "1" if the -DCD line has
- *	   changed state one more more times since the last time the MSR was
+ *	   changed state one more times since the last time the MSR was
  *	   read by the host.
  *  Bit 2: Trailing Edge Ring Indicator (TERI). Set to "1" if the -RI line has
  *	   had a low to high transition since the last time the MSR was read by
  *	   the host.
  *  Bit 1: Delta Data Set Ready (DDSR). Set to "1" if the -DSR line has changed
- *	   state one more more times since the last time the MSR was read by the
+ *	   state one more times since the last time the MSR was read by the
  *	   host.
  *  Bit 0: Delta Clear To Send (DCTS). Set to "1" if the -CTS line has changed
  *	   state one more times since the last time the MSR was read by the
-- 
2.36.1

Hi,
On 21/08/2022 16:34, Jilin Yuan wrote:
>  Delete the redundant word 'more'.
> 
> Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
> ---
>  drivers/usb/serial/mct_u232.h | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
> index e3d09a83cab1..f79a1f1b6a98 100644
> --- a/drivers/usb/serial/mct_u232.h
> +++ b/drivers/usb/serial/mct_u232.h
> @@ -273,13 +273,13 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
>   *  Bit 5: Data Set Ready (DSR). Reflects the state of the DSR line on the UART.
>   *  Bit 4: Clear To Send (CTS). Reflects the state of the CTS line on the UART.
>   *  Bit 3: Delta Data Carrier Detect (DDCD). Set to "1" if the -DCD line has
> - *	   changed state one more more times since the last time the MSR was
> + *	   changed state one more times since the last time the MSR was

This does not really make much sense before or after the patch.
Should it read: "one or more times"?

Thanks,
Conor.

>   *	   read by the host.
>   *  Bit 2: Trailing Edge Ring Indicator (TERI). Set to "1" if the -RI line has
>   *	   had a low to high transition since the last time the MSR was read by
>   *	   the host.
>   *  Bit 1: Delta Data Set Ready (DDSR). Set to "1" if the -DSR line has changed
> - *	   state one more more times since the last time the MSR was read by the
> + *	   state one more times since the last time the MSR was read by the
>   *	   host.
>   *  Bit 0: Delta Clear To Send (DCTS). Set to "1" if the -CTS line has changed
>   *	   state one more times since the last time the MSR was read by the