drivers/nvmem/Kconfig | 342 +++++++++++++++++++++-------------------- drivers/nvmem/Makefile | 120 +++++++-------- 2 files changed, 232 insertions(+), 230 deletions(-)
From: Rafał Miłecki <rafal@milecki.pl>
1. Match what most subsystems do
2. Simplify maintenance a bit
3. Reduce amount of conflicts for new drivers patches
While at it unify indent level in Makefile.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
drivers/nvmem/Kconfig | 342 +++++++++++++++++++++--------------------
drivers/nvmem/Makefile | 120 +++++++--------
2 files changed, 232 insertions(+), 230 deletions(-)
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index bab8a29c9861..cb4036f81a25 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -21,6 +21,90 @@ config NVMEM_SYSFS
This interface is mostly used by userspace applications to
read/write directly into nvmem.
+# Devices
+
+config JZ4780_EFUSE
+ tristate "JZ4780 EFUSE Memory Support"
+ depends on MACH_INGENIC || COMPILE_TEST
+ depends on HAS_IOMEM
+ depends on OF
+ select REGMAP_MMIO
+ help
+ Say Y here to include support for JZ4780 efuse memory found on
+ all JZ4780 SoC based devices.
+ To compile this driver as a module, choose M here: the module
+ will be called nvmem_jz4780_efuse.
+
+config MESON_EFUSE
+ tristate "Amlogic Meson GX eFuse Support"
+ depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
+ help
+ This is a driver to retrieve specific values from the eFuse found on
+ the Amlogic Meson GX SoCs.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem_meson_efuse.
+
+config MESON_MX_EFUSE
+ tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
+ depends on ARCH_MESON || COMPILE_TEST
+ help
+ This is a driver to retrieve specific values from the eFuse found on
+ the Amlogic Meson6, Meson8 and Meson8b SoCs.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem_meson_mx_efuse.
+
+config MICROCHIP_OTPC
+ tristate "Microchip OTPC support"
+ depends on ARCH_AT91 || COMPILE_TEST
+ help
+ This driver enable the OTP controller available on Microchip SAMA7G5
+ SoCs. It controlls the access to the OTP memory connected to it.
+
+config MTK_EFUSE
+ tristate "Mediatek SoCs EFUSE support"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This is a driver to access hardware related data like sensor
+ calibration, HDMI impedance etc.
+
+ This driver can also be built as a module. If so, the module
+ will be called efuse-mtk.
+
+config NVMEM_APPLE_EFUSES
+ tristate "Apple eFuse support"
+ depends on ARCH_APPLE || COMPILE_TEST
+ default ARCH_APPLE
+ help
+ Say y here to enable support for reading eFuses on Apple SoCs
+ such as the M1. These are e.g. used to store factory programmed
+ calibration data required for the PCIe or the USB-C PHY.
+
+ This driver can also be built as a module. If so, the module will
+ be called nvmem-apple-efuses.
+
+config NVMEM_BCM_OCOTP
+ tristate "Broadcom On-Chip OTP Controller support"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM
+ default ARCH_BCM_IPROC
+ help
+ Say y here to enable read/write access to the Broadcom OTP
+ controller.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-bcm-ocotp.
+
+config NVMEM_BRCM_NVRAM
+ tristate "Broadcom's NVRAM support"
+ depends on ARCH_BCM_5301X || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This driver provides support for Broadcom's NVRAM that can be accessed
+ using I/O mapping.
+
config NVMEM_IMX_IIM
tristate "i.MX IC Identification Module support"
depends on ARCH_MXC || COMPILE_TEST
@@ -52,17 +136,18 @@ config NVMEM_IMX_OCOTP_SCU
This is a driver for the SCU On-Chip OTP Controller (OCOTP)
available on i.MX8 SoCs.
-config JZ4780_EFUSE
- tristate "JZ4780 EFUSE Memory Support"
- depends on MACH_INGENIC || COMPILE_TEST
+config NVMEM_LAYERSCAPE_SFP
+ tristate "Layerscape SFP (Security Fuse Processor) support"
+ depends on ARCH_LAYERSCAPE || COMPILE_TEST
depends on HAS_IOMEM
- depends on OF
select REGMAP_MMIO
help
- Say Y here to include support for JZ4780 efuse memory found on
- all JZ4780 SoC based devices.
- To compile this driver as a module, choose M here: the module
- will be called nvmem_jz4780_efuse.
+ This driver provides support to read the eFuses on Freescale
+ Layerscape SoC's. For example, the vendor provides a per part
+ unique ID there.
+
+ This driver can also be built as a module. If so, the module
+ will be called layerscape-sfp.
config NVMEM_LPC18XX_EEPROM
tristate "NXP LPC18XX EEPROM Memory Support"
@@ -96,24 +181,6 @@ config NVMEM_MXS_OCOTP
This driver can also be built as a module. If so, the module
will be called nvmem-mxs-ocotp.
-config MTK_EFUSE
- tristate "Mediatek SoCs EFUSE support"
- depends on ARCH_MEDIATEK || COMPILE_TEST
- depends on HAS_IOMEM
- help
- This is a driver to access hardware related data like sensor
- calibration, HDMI impedance etc.
-
- This driver can also be built as a module. If so, the module
- will be called efuse-mtk.
-
-config MICROCHIP_OTPC
- tristate "Microchip OTPC support"
- depends on ARCH_AT91 || COMPILE_TEST
- help
- This driver enable the OTP controller available on Microchip SAMA7G5
- SoCs. It controlls the access to the OTP memory connected to it.
-
config NVMEM_NINTENDO_OTP
tristate "Nintendo Wii and Wii U OTP Support"
depends on WII || COMPILE_TEST
@@ -126,16 +193,25 @@ config NVMEM_NINTENDO_OTP
This driver can also be built as a module. If so, the module
will be called nvmem-nintendo-otp.
-config QCOM_QFPROM
- tristate "QCOM QFPROM Support"
- depends on ARCH_QCOM || COMPILE_TEST
+config NVMEM_RMEM
+ tristate "Reserved Memory Based Driver Support"
depends on HAS_IOMEM
help
- Say y here to enable QFPROM support. The QFPROM provides access
- functions for QFPROM data to rest of the drivers via nvmem interface.
+ This driver maps reserved memory into an nvmem device. It might be
+ useful to expose information left by firmware in memory.
This driver can also be built as a module. If so, the module
- will be called nvmem_qfprom.
+ will be called nvmem-rmem.
+
+config NVMEM_SNVS_LPGPR
+ tristate "Support for Low Power General Purpose Register"
+ depends on ARCH_MXC || COMPILE_TEST
+ help
+ This is a driver for Low Power General Purpose Register (LPGPR) available on
+ i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-snvs-lpgpr.
config NVMEM_SPMI_SDAM
tristate "SPMI SDAM Support"
@@ -145,40 +221,6 @@ config NVMEM_SPMI_SDAM
Qualcomm Technologies, Inc. PMICs. It provides the clients
an interface to read/write to the SDAM module's shared memory.
-config ROCKCHIP_EFUSE
- tristate "Rockchip eFuse Support"
- depends on ARCH_ROCKCHIP || COMPILE_TEST
- depends on HAS_IOMEM
- help
- This is a simple drive to dump specified values of Rockchip SoC
- from eFuse, such as cpu-leakage.
-
- This driver can also be built as a module. If so, the module
- will be called nvmem_rockchip_efuse.
-
-config ROCKCHIP_OTP
- tristate "Rockchip OTP controller support"
- depends on ARCH_ROCKCHIP || COMPILE_TEST
- depends on HAS_IOMEM
- help
- This is a simple drive to dump specified values of Rockchip SoC
- from otp, such as cpu-leakage.
-
- This driver can also be built as a module. If so, the module
- will be called nvmem_rockchip_otp.
-
-config NVMEM_BCM_OCOTP
- tristate "Broadcom On-Chip OTP Controller support"
- depends on ARCH_BCM_IPROC || COMPILE_TEST
- depends on HAS_IOMEM
- default ARCH_BCM_IPROC
- help
- Say y here to enable read/write access to the Broadcom OTP
- controller.
-
- This driver can also be built as a module. If so, the module
- will be called nvmem-bcm-ocotp.
-
config NVMEM_STM32_ROMEM
tristate "STMicroelectronics STM32 factory-programmed memory support"
depends on ARCH_STM32 || COMPILE_TEST
@@ -189,6 +231,18 @@ config NVMEM_STM32_ROMEM
This driver can also be built as a module. If so, the module
will be called nvmem-stm32-romem.
+config NVMEM_SUNPLUS_OCOTP
+ tristate "Sunplus SoC OTP support"
+ depends on SOC_SP7021 || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This is a driver for the On-chip OTP controller (OCOTP) available
+ on Sunplus SoCs. It provides access to 128 bytes of one-time
+ programmable eFuse.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-sunplus-ocotp.
+
config NVMEM_SUNXI_SID
tristate "Allwinner SoCs SID support"
depends on ARCH_SUNXI
@@ -199,16 +253,18 @@ config NVMEM_SUNXI_SID
This driver can also be built as a module. If so, the module
will be called nvmem_sunxi_sid.
-config UNIPHIER_EFUSE
- tristate "UniPhier SoCs eFuse support"
- depends on ARCH_UNIPHIER || COMPILE_TEST
- depends on HAS_IOMEM
+config NVMEM_U_BOOT_ENV
+ tristate "U-Boot environment variables support"
+ depends on OF && MTD
+ select CRC32
help
- This is a simple driver to dump specified values of UniPhier SoC
- from eFuse.
+ U-Boot stores its setup as environment variables. This driver adds
+ support for verifying & exporting such data. It also exposes variables
+ as NVMEM cells so they can be referenced by other drivers.
- This driver can also be built as a module. If so, the module
- will be called nvmem-uniphier-efuse.
+ Currently this drivers works only with env variables on top of MTD.
+
+ If compiled as module it will be called nvmem_u-boot-env.
config NVMEM_VF610_OCOTP
tristate "VF610 SoC OCOTP support"
@@ -221,35 +277,26 @@ config NVMEM_VF610_OCOTP
This driver can also be build as a module. If so, the module will
be called nvmem-vf610-ocotp.
-config MESON_EFUSE
- tristate "Amlogic Meson GX eFuse Support"
- depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
- help
- This is a driver to retrieve specific values from the eFuse found on
- the Amlogic Meson GX SoCs.
-
- This driver can also be built as a module. If so, the module
- will be called nvmem_meson_efuse.
-
-config MESON_MX_EFUSE
- tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
- depends on ARCH_MESON || COMPILE_TEST
+config NVMEM_ZYNQMP
+ bool "Xilinx ZYNQMP SoC nvmem firmware support"
+ depends on ARCH_ZYNQMP
help
- This is a driver to retrieve specific values from the eFuse found on
- the Amlogic Meson6, Meson8 and Meson8b SoCs.
+ This is a driver to access hardware related data like
+ soc revision, IDCODE... etc by using the firmware
+ interface.
- This driver can also be built as a module. If so, the module
- will be called nvmem_meson_mx_efuse.
+ If sure, say yes. If unsure, say no.
-config NVMEM_SNVS_LPGPR
- tristate "Support for Low Power General Purpose Register"
- depends on ARCH_MXC || COMPILE_TEST
+config QCOM_QFPROM
+ tristate "QCOM QFPROM Support"
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on HAS_IOMEM
help
- This is a driver for Low Power General Purpose Register (LPGPR) available on
- i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip.
+ Say y here to enable QFPROM support. The QFPROM provides access
+ functions for QFPROM data to rest of the drivers via nvmem interface.
This driver can also be built as a module. If so, the module
- will be called nvmem-snvs-lpgpr.
+ will be called nvmem_qfprom.
config RAVE_SP_EEPROM
tristate "Rave SP EEPROM Support"
@@ -257,6 +304,28 @@ config RAVE_SP_EEPROM
help
Say y here to enable Rave SP EEPROM support.
+config ROCKCHIP_EFUSE
+ tristate "Rockchip eFuse Support"
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This is a simple drive to dump specified values of Rockchip SoC
+ from eFuse, such as cpu-leakage.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem_rockchip_efuse.
+
+config ROCKCHIP_OTP
+ tristate "Rockchip OTP controller support"
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This is a simple drive to dump specified values of Rockchip SoC
+ from otp, such as cpu-leakage.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem_rockchip_otp.
+
config SC27XX_EFUSE
tristate "Spreadtrum SC27XX eFuse Support"
depends on MFD_SC27XX_PMIC || COMPILE_TEST
@@ -268,16 +337,6 @@ config SC27XX_EFUSE
This driver can also be built as a module. If so, the module
will be called nvmem-sc27xx-efuse.
-config NVMEM_ZYNQMP
- bool "Xilinx ZYNQMP SoC nvmem firmware support"
- depends on ARCH_ZYNQMP
- help
- This is a driver to access hardware related data like
- soc revision, IDCODE... etc by using the firmware
- interface.
-
- If sure, say yes. If unsure, say no.
-
config SPRD_EFUSE
tristate "Spreadtrum SoC eFuse Support"
depends on ARCH_SPRD || COMPILE_TEST
@@ -289,72 +348,15 @@ config SPRD_EFUSE
This driver can also be built as a module. If so, the module
will be called nvmem-sprd-efuse.
-config NVMEM_RMEM
- tristate "Reserved Memory Based Driver Support"
- depends on HAS_IOMEM
- help
- This driver maps reserved memory into an nvmem device. It might be
- useful to expose information left by firmware in memory.
-
- This driver can also be built as a module. If so, the module
- will be called nvmem-rmem.
-
-config NVMEM_BRCM_NVRAM
- tristate "Broadcom's NVRAM support"
- depends on ARCH_BCM_5301X || COMPILE_TEST
- depends on HAS_IOMEM
- help
- This driver provides support for Broadcom's NVRAM that can be accessed
- using I/O mapping.
-
-config NVMEM_LAYERSCAPE_SFP
- tristate "Layerscape SFP (Security Fuse Processor) support"
- depends on ARCH_LAYERSCAPE || COMPILE_TEST
- depends on HAS_IOMEM
- select REGMAP_MMIO
- help
- This driver provides support to read the eFuses on Freescale
- Layerscape SoC's. For example, the vendor provides a per part
- unique ID there.
-
- This driver can also be built as a module. If so, the module
- will be called layerscape-sfp.
-
-config NVMEM_SUNPLUS_OCOTP
- tristate "Sunplus SoC OTP support"
- depends on SOC_SP7021 || COMPILE_TEST
+config UNIPHIER_EFUSE
+ tristate "UniPhier SoCs eFuse support"
+ depends on ARCH_UNIPHIER || COMPILE_TEST
depends on HAS_IOMEM
help
- This is a driver for the On-chip OTP controller (OCOTP) available
- on Sunplus SoCs. It provides access to 128 bytes of one-time
- programmable eFuse.
+ This is a simple driver to dump specified values of UniPhier SoC
+ from eFuse.
This driver can also be built as a module. If so, the module
- will be called nvmem-sunplus-ocotp.
-
-config NVMEM_APPLE_EFUSES
- tristate "Apple eFuse support"
- depends on ARCH_APPLE || COMPILE_TEST
- default ARCH_APPLE
- help
- Say y here to enable support for reading eFuses on Apple SoCs
- such as the M1. These are e.g. used to store factory programmed
- calibration data required for the PCIe or the USB-C PHY.
-
- This driver can also be built as a module. If so, the module will
- be called nvmem-apple-efuses.
-
-config NVMEM_U_BOOT_ENV
- tristate "U-Boot environment variables support"
- depends on OF && MTD
- select CRC32
- help
- U-Boot stores its setup as environment variables. This driver adds
- support for verifying & exporting such data. It also exposes variables
- as NVMEM cells so they can be referenced by other drivers.
-
- Currently this drivers works only with env variables on top of MTD.
-
- If compiled as module it will be called nvmem_u-boot-env.
+ will be called nvmem-uniphier-efuse.
endif
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 399f9972d45b..53a6ca1d0e01 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -7,67 +7,67 @@ obj-$(CONFIG_NVMEM) += nvmem_core.o
nvmem_core-y := core.o
# Devices
-obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o
-nvmem-bcm-ocotp-y := bcm-ocotp.o
-obj-$(CONFIG_NVMEM_IMX_IIM) += nvmem-imx-iim.o
-nvmem-imx-iim-y := imx-iim.o
-obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o
-nvmem-imx-ocotp-y := imx-ocotp.o
-obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU) += nvmem-imx-ocotp-scu.o
-nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o
obj-$(CONFIG_JZ4780_EFUSE) += nvmem_jz4780_efuse.o
-nvmem_jz4780_efuse-y := jz4780-efuse.o
+nvmem_jz4780_efuse-y := jz4780-efuse.o
+obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o
+nvmem_meson_efuse-y := meson-efuse.o
+obj-$(CONFIG_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o
+nvmem_meson_mx_efuse-y := meson-mx-efuse.o
+obj-$(CONFIG_MICROCHIP_OTPC) += nvmem-microchip-otpc.o
+nvmem-microchip-otpc-y := microchip-otpc.o
+obj-$(CONFIG_MTK_EFUSE) += nvmem_mtk-efuse.o
+nvmem_mtk-efuse-y := mtk-efuse.o
+obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o
+nvmem-apple-efuses-y := apple-efuses.o
+obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o
+nvmem-bcm-ocotp-y := bcm-ocotp.o
+obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o
+nvmem_brcm_nvram-y := brcm_nvram.o
+obj-$(CONFIG_NVMEM_IMX_IIM) += nvmem-imx-iim.o
+nvmem-imx-iim-y := imx-iim.o
+obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o
+nvmem-imx-ocotp-y := imx-ocotp.o
+obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU) += nvmem-imx-ocotp-scu.o
+nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o
+obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP) += nvmem-layerscape-sfp.o
+nvmem-layerscape-sfp-y := layerscape-sfp.o
obj-$(CONFIG_NVMEM_LPC18XX_EEPROM) += nvmem_lpc18xx_eeprom.o
-nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o
-obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o
-nvmem_lpc18xx_otp-y := lpc18xx_otp.o
-obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o
-nvmem-mxs-ocotp-y := mxs-ocotp.o
+nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o
+obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o
+nvmem_lpc18xx_otp-y := lpc18xx_otp.o
+obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o
+nvmem-mxs-ocotp-y := mxs-ocotp.o
obj-$(CONFIG_NVMEM_NINTENDO_OTP) += nvmem-nintendo-otp.o
-nvmem-nintendo-otp-y := nintendo-otp.o
-obj-$(CONFIG_MTK_EFUSE) += nvmem_mtk-efuse.o
-nvmem_mtk-efuse-y := mtk-efuse.o
-obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o
-nvmem_qfprom-y := qfprom.o
-obj-$(CONFIG_NVMEM_SPMI_SDAM) += nvmem_qcom-spmi-sdam.o
-nvmem_qcom-spmi-sdam-y += qcom-spmi-sdam.o
-obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o
-nvmem_rockchip_efuse-y := rockchip-efuse.o
-obj-$(CONFIG_ROCKCHIP_OTP) += nvmem-rockchip-otp.o
-nvmem-rockchip-otp-y := rockchip-otp.o
-obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o
-nvmem_stm32_romem-y := stm32-romem.o
-obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o
-nvmem_sunxi_sid-y := sunxi_sid.o
-obj-$(CONFIG_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o
-nvmem-uniphier-efuse-y := uniphier-efuse.o
-obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o
-nvmem-vf610-ocotp-y := vf610-ocotp.o
-obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o
-nvmem_meson_efuse-y := meson-efuse.o
-obj-$(CONFIG_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o
-nvmem_meson_mx_efuse-y := meson-mx-efuse.o
-obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o
-nvmem_snvs_lpgpr-y := snvs_lpgpr.o
-obj-$(CONFIG_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o
-nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o
-obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o
-nvmem-sc27xx-efuse-y := sc27xx-efuse.o
-obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o
-nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o
-obj-$(CONFIG_SPRD_EFUSE) += nvmem_sprd_efuse.o
-nvmem_sprd_efuse-y := sprd-efuse.o
-obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o
-nvmem-rmem-y := rmem.o
-obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o
-nvmem_brcm_nvram-y := brcm_nvram.o
-obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP) += nvmem-layerscape-sfp.o
-nvmem-layerscape-sfp-y := layerscape-sfp.o
+nvmem-nintendo-otp-y := nintendo-otp.o
+obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o
+nvmem-rmem-y := rmem.o
+obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o
+nvmem_snvs_lpgpr-y := snvs_lpgpr.o
+obj-$(CONFIG_NVMEM_SPMI_SDAM) += nvmem_qcom-spmi-sdam.o
+nvmem_qcom-spmi-sdam-y += qcom-spmi-sdam.o
+obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o
+nvmem_stm32_romem-y := stm32-romem.o
obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP) += nvmem_sunplus_ocotp.o
-nvmem_sunplus_ocotp-y := sunplus-ocotp.o
-obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o
-nvmem-apple-efuses-y := apple-efuses.o
-obj-$(CONFIG_MICROCHIP_OTPC) += nvmem-microchip-otpc.o
-nvmem-microchip-otpc-y := microchip-otpc.o
-obj-$(CONFIG_NVMEM_U_BOOT_ENV) += nvmem_u-boot-env.o
-nvmem_u-boot-env-y := u-boot-env.o
+nvmem_sunplus_ocotp-y := sunplus-ocotp.o
+obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o
+nvmem_sunxi_sid-y := sunxi_sid.o
+obj-$(CONFIG_NVMEM_U_BOOT_ENV) += nvmem_u-boot-env.o
+nvmem_u-boot-env-y := u-boot-env.o
+obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o
+nvmem-vf610-ocotp-y := vf610-ocotp.o
+obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o
+nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o
+obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o
+nvmem_qfprom-y := qfprom.o
+obj-$(CONFIG_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o
+nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o
+obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o
+nvmem_rockchip_efuse-y := rockchip-efuse.o
+obj-$(CONFIG_ROCKCHIP_OTP) += nvmem-rockchip-otp.o
+nvmem-rockchip-otp-y := rockchip-otp.o
+obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o
+nvmem-sc27xx-efuse-y := sc27xx-efuse.o
+obj-$(CONFIG_SPRD_EFUSE) += nvmem_sprd_efuse.o
+nvmem_sprd_efuse-y := sprd-efuse.o
+obj-$(CONFIG_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o
+nvmem-uniphier-efuse-y := uniphier-efuse.o
--
2.34.1
Thanks Rafał, On 18/08/2022 06:09, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > 1. Match what most subsystems do > 2. Simplify maintenance a bit > 3. Reduce amount of conflicts for new drivers patches > > While at it unify indent level in Makefile. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- > drivers/nvmem/Kconfig | 342 +++++++++++++++++++++-------------------- > drivers/nvmem/Makefile | 120 +++++++-------- > 2 files changed, 232 insertions(+), 230 deletions(-) > > diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig > index bab8a29c9861..cb4036f81a25 100644 > --- a/drivers/nvmem/Kconfig > +++ b/drivers/nvmem/Kconfig > @@ -21,6 +21,90 @@ config NVMEM_SYSFS > This interface is mostly used by userspace applications to > read/write directly into nvmem. > > +# Devices > + > +config JZ4780_EFUSE > + tristate "JZ4780 EFUSE Memory Support" > + depends on MACH_INGENIC || COMPILE_TEST > + depends on HAS_IOMEM > + depends on OF > + select REGMAP_MMIO > + help > + Say Y here to include support for JZ4780 efuse memory found on > + all JZ4780 SoC based devices. > + To compile this driver as a module, choose M here: the module > + will be called nvmem_jz4780_efuse. > + > +config MESON_EFUSE > + tristate "Amlogic Meson GX eFuse Support" > + depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM > + help > + This is a driver to retrieve specific values from the eFuse found on > + the Amlogic Meson GX SoCs. > + > + This driver can also be built as a module. If so, the module > + will be called nvmem_meson_efuse. > + > +config MESON_MX_EFUSE > + tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support" > + depends on ARCH_MESON || COMPILE_TEST > + help > + This is a driver to retrieve specific values from the eFuse found on > + the Amlogic Meson6, Meson8 and Meson8b SoCs. > + > + This driver can also be built as a module. If so, the module > + will be called nvmem_meson_mx_efuse. > + > +config MICROCHIP_OTPC > + tristate "Microchip OTPC support" > + depends on ARCH_AT91 || COMPILE_TEST > + help > + This driver enable the OTP controller available on Microchip SAMA7G5 > + SoCs. It controlls the access to the OTP memory connected to it. > + > +config MTK_EFUSE > + tristate "Mediatek SoCs EFUSE support" > + depends on ARCH_MEDIATEK || COMPILE_TEST > + depends on HAS_IOMEM > + help > + This is a driver to access hardware related data like sensor > + calibration, HDMI impedance etc. > + > + This driver can also be built as a module. If so, the module > + will be called efuse-mtk. > + Looks like we ended up with mix two styles of Kconfig symbols here, Pefered way is it prefix the mwith NVMEM_. While you are at it, can you clean this as well. --srini > +config NVMEM_APPLE_EFUSES > + tristate "Apple eFuse support" > + depends on ARCH_APPLE || COMPILE_TEST > + default ARCH_APPLE > + help > + Say y here to enable support for reading eFuses on Apple SoCs > + such as the M1. These are e.g. used to store factory programmed > + calibration data required for the PCIe or the USB-C PHY. > + > + This driver can also be built as a module. If so, the module will > + be called nvmem-apple-efuses. > + > +config NVMEM_BCM_OCOTP > + tristate "Broadcom On-Chip OTP Controller support" > + depends on ARCH_BCM_IPROC || COMPILE_TEST > + depends on HAS_IOMEM > + default ARCH_BCM_IPROC > + help > + Say y here to enable read/write access to the Broadcom OTP > + controller. > + > + This driver can also be built as a module. If so, the module > + will be called nvmem-bcm-ocotp. > + > +config NVMEM_BRCM_NVRAM > + tristate "Broadcom's NVRAM support" > + depends on ARCH_BCM_5301X || COMPILE_TEST > + depends on HAS_IOMEM > + help > + This driver provides support for Broadcom's NVRAM that can be accessed > + using I/O mapping. > + > config NVMEM_IMX_IIM > tristate "i.MX IC Identification Module support" > depends on ARCH_MXC || COMPILE_TEST > @@ -52,17 +136,18 @@ config NVMEM_IMX_OCOTP_SCU > This is a driver for the SCU On-Chip OTP Controller (OCOTP) > available on i.MX8 SoCs. > > -config JZ4780_EFUSE > - tristate "JZ4780 EFUSE Memory Support" > - depends on MACH_INGENIC || COMPILE_TEST > +config NVMEM_LAYERSCAPE_SFP > + tristate "Layerscape SFP (Security Fuse Processor) support" > + depends on ARCH_LAYERSCAPE || COMPILE_TEST > depends on HAS_IOMEM > - depends on OF > select REGMAP_MMIO > help > - Say Y here to include support for JZ4780 efuse memory found on > - all JZ4780 SoC based devices. > - To compile this driver as a module, choose M here: the module > - will be called nvmem_jz4780_efuse. > + This driver provides support to read the eFuses on Freescale > + Layerscape SoC's. For example, the vendor provides a per part > + unique ID there. > + > + This driver can also be built as a module. If so, the module > + will be called layerscape-sfp. > > config NVMEM_LPC18XX_EEPROM > tristate "NXP LPC18XX EEPROM Memory Support" > @@ -96,24 +181,6 @@ config NVMEM_MXS_OCOTP > This driver can also be built as a module. If so, the module > will be called nvmem-mxs-ocotp. > > -config MTK_EFUSE > - tristate "Mediatek SoCs EFUSE support" > - depends on ARCH_MEDIATEK || COMPILE_TEST > - depends on HAS_IOMEM > - help > - This is a driver to access hardware related data like sensor > - calibration, HDMI impedance etc. > - > - This driver can also be built as a module. If so, the module > - will be called efuse-mtk. > - > -config MICROCHIP_OTPC > - tristate "Microchip OTPC support" > - depends on ARCH_AT91 || COMPILE_TEST > - help > - This driver enable the OTP controller available on Microchip SAMA7G5 > - SoCs. It controlls the access to the OTP memory connected to it. > - > config NVMEM_NINTENDO_OTP > tristate "Nintendo Wii and Wii U OTP Support" > depends on WII || COMPILE_TEST > @@ -126,16 +193,25 @@ config NVMEM_NINTENDO_OTP > This driver can also be built as a module. If so, the module > will be called nvmem-nintendo-otp. > > -config QCOM_QFPROM > - tristate "QCOM QFPROM Support" > - depends on ARCH_QCOM || COMPILE_TEST > +config NVMEM_RMEM > + tristate "Reserved Memory Based Driver Support" > depends on HAS_IOMEM > help > - Say y here to enable QFPROM support. The QFPROM provides access > - functions for QFPROM data to rest of the drivers via nvmem interface. > + This driver maps reserved memory into an nvmem device. It might be > + useful to expose information left by firmware in memory. > > This driver can also be built as a module. If so, the module > - will be called nvmem_qfprom. > + will be called nvmem-rmem. > + > +config NVMEM_SNVS_LPGPR > + tristate "Support for Low Power General Purpose Register" > + depends on ARCH_MXC || COMPILE_TEST > + help > + This is a driver for Low Power General Purpose Register (LPGPR) available on > + i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip. > + > + This driver can also be built as a module. If so, the module > + will be called nvmem-snvs-lpgpr. > > config NVMEM_SPMI_SDAM > tristate "SPMI SDAM Support" > @@ -145,40 +221,6 @@ config NVMEM_SPMI_SDAM > Qualcomm Technologies, Inc. PMICs. It provides the clients > an interface to read/write to the SDAM module's shared memory. > > -config ROCKCHIP_EFUSE > - tristate "Rockchip eFuse Support" > - depends on ARCH_ROCKCHIP || COMPILE_TEST > - depends on HAS_IOMEM > - help > - This is a simple drive to dump specified values of Rockchip SoC > - from eFuse, such as cpu-leakage. > - > - This driver can also be built as a module. If so, the module > - will be called nvmem_rockchip_efuse. > - > -config ROCKCHIP_OTP > - tristate "Rockchip OTP controller support" > - depends on ARCH_ROCKCHIP || COMPILE_TEST > - depends on HAS_IOMEM > - help > - This is a simple drive to dump specified values of Rockchip SoC > - from otp, such as cpu-leakage. > - > - This driver can also be built as a module. If so, the module > - will be called nvmem_rockchip_otp. > - > -config NVMEM_BCM_OCOTP > - tristate "Broadcom On-Chip OTP Controller support" > - depends on ARCH_BCM_IPROC || COMPILE_TEST > - depends on HAS_IOMEM > - default ARCH_BCM_IPROC > - help > - Say y here to enable read/write access to the Broadcom OTP > - controller. > - > - This driver can also be built as a module. If so, the module > - will be called nvmem-bcm-ocotp. > - > config NVMEM_STM32_ROMEM > tristate "STMicroelectronics STM32 factory-programmed memory support" > depends on ARCH_STM32 || COMPILE_TEST > @@ -189,6 +231,18 @@ config NVMEM_STM32_ROMEM > This driver can also be built as a module. If so, the module > will be called nvmem-stm32-romem. > > +config NVMEM_SUNPLUS_OCOTP > + tristate "Sunplus SoC OTP support" > + depends on SOC_SP7021 || COMPILE_TEST > + depends on HAS_IOMEM > + help > + This is a driver for the On-chip OTP controller (OCOTP) available > + on Sunplus SoCs. It provides access to 128 bytes of one-time > + programmable eFuse. > + > + This driver can also be built as a module. If so, the module > + will be called nvmem-sunplus-ocotp. > + > config NVMEM_SUNXI_SID > tristate "Allwinner SoCs SID support" > depends on ARCH_SUNXI > @@ -199,16 +253,18 @@ config NVMEM_SUNXI_SID > This driver can also be built as a module. If so, the module > will be called nvmem_sunxi_sid. > > -config UNIPHIER_EFUSE > - tristate "UniPhier SoCs eFuse support" > - depends on ARCH_UNIPHIER || COMPILE_TEST > - depends on HAS_IOMEM > +config NVMEM_U_BOOT_ENV > + tristate "U-Boot environment variables support" > + depends on OF && MTD > + select CRC32 > help > - This is a simple driver to dump specified values of UniPhier SoC > - from eFuse. > + U-Boot stores its setup as environment variables. This driver adds > + support for verifying & exporting such data. It also exposes variables > + as NVMEM cells so they can be referenced by other drivers. > > - This driver can also be built as a module. If so, the module > - will be called nvmem-uniphier-efuse. > + Currently this drivers works only with env variables on top of MTD. > + > + If compiled as module it will be called nvmem_u-boot-env. > > config NVMEM_VF610_OCOTP > tristate "VF610 SoC OCOTP support" > @@ -221,35 +277,26 @@ config NVMEM_VF610_OCOTP > This driver can also be build as a module. If so, the module will > be called nvmem-vf610-ocotp. > > -config MESON_EFUSE > - tristate "Amlogic Meson GX eFuse Support" > - depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM > - help > - This is a driver to retrieve specific values from the eFuse found on > - the Amlogic Meson GX SoCs. > - > - This driver can also be built as a module. If so, the module > - will be called nvmem_meson_efuse. > - > -config MESON_MX_EFUSE > - tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support" > - depends on ARCH_MESON || COMPILE_TEST > +config NVMEM_ZYNQMP > + bool "Xilinx ZYNQMP SoC nvmem firmware support" > + depends on ARCH_ZYNQMP > help > - This is a driver to retrieve specific values from the eFuse found on > - the Amlogic Meson6, Meson8 and Meson8b SoCs. > + This is a driver to access hardware related data like > + soc revision, IDCODE... etc by using the firmware > + interface. > > - This driver can also be built as a module. If so, the module > - will be called nvmem_meson_mx_efuse. > + If sure, say yes. If unsure, say no. > > -config NVMEM_SNVS_LPGPR > - tristate "Support for Low Power General Purpose Register" > - depends on ARCH_MXC || COMPILE_TEST > +config QCOM_QFPROM > + tristate "QCOM QFPROM Support" > + depends on ARCH_QCOM || COMPILE_TEST > + depends on HAS_IOMEM > help > - This is a driver for Low Power General Purpose Register (LPGPR) available on > - i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip. > + Say y here to enable QFPROM support. The QFPROM provides access > + functions for QFPROM data to rest of the drivers via nvmem interface. > > This driver can also be built as a module. If so, the module > - will be called nvmem-snvs-lpgpr. > + will be called nvmem_qfprom. > > config RAVE_SP_EEPROM > tristate "Rave SP EEPROM Support" > @@ -257,6 +304,28 @@ config RAVE_SP_EEPROM > help > Say y here to enable Rave SP EEPROM support. > > +config ROCKCHIP_EFUSE > + tristate "Rockchip eFuse Support" > + depends on ARCH_ROCKCHIP || COMPILE_TEST > + depends on HAS_IOMEM > + help > + This is a simple drive to dump specified values of Rockchip SoC > + from eFuse, such as cpu-leakage. > + > + This driver can also be built as a module. If so, the module > + will be called nvmem_rockchip_efuse. > + > +config ROCKCHIP_OTP > + tristate "Rockchip OTP controller support" > + depends on ARCH_ROCKCHIP || COMPILE_TEST > + depends on HAS_IOMEM > + help > + This is a simple drive to dump specified values of Rockchip SoC > + from otp, such as cpu-leakage. > + > + This driver can also be built as a module. If so, the module > + will be called nvmem_rockchip_otp. > + > config SC27XX_EFUSE > tristate "Spreadtrum SC27XX eFuse Support" > depends on MFD_SC27XX_PMIC || COMPILE_TEST > @@ -268,16 +337,6 @@ config SC27XX_EFUSE > This driver can also be built as a module. If so, the module > will be called nvmem-sc27xx-efuse. > > -config NVMEM_ZYNQMP > - bool "Xilinx ZYNQMP SoC nvmem firmware support" > - depends on ARCH_ZYNQMP > - help > - This is a driver to access hardware related data like > - soc revision, IDCODE... etc by using the firmware > - interface. > - > - If sure, say yes. If unsure, say no. > - > config SPRD_EFUSE > tristate "Spreadtrum SoC eFuse Support" > depends on ARCH_SPRD || COMPILE_TEST > @@ -289,72 +348,15 @@ config SPRD_EFUSE > This driver can also be built as a module. If so, the module > will be called nvmem-sprd-efuse. > > -config NVMEM_RMEM > - tristate "Reserved Memory Based Driver Support" > - depends on HAS_IOMEM > - help > - This driver maps reserved memory into an nvmem device. It might be > - useful to expose information left by firmware in memory. > - > - This driver can also be built as a module. If so, the module > - will be called nvmem-rmem. > - > -config NVMEM_BRCM_NVRAM > - tristate "Broadcom's NVRAM support" > - depends on ARCH_BCM_5301X || COMPILE_TEST > - depends on HAS_IOMEM > - help > - This driver provides support for Broadcom's NVRAM that can be accessed > - using I/O mapping. > - > -config NVMEM_LAYERSCAPE_SFP > - tristate "Layerscape SFP (Security Fuse Processor) support" > - depends on ARCH_LAYERSCAPE || COMPILE_TEST > - depends on HAS_IOMEM > - select REGMAP_MMIO > - help > - This driver provides support to read the eFuses on Freescale > - Layerscape SoC's. For example, the vendor provides a per part > - unique ID there. > - > - This driver can also be built as a module. If so, the module > - will be called layerscape-sfp. > - > -config NVMEM_SUNPLUS_OCOTP > - tristate "Sunplus SoC OTP support" > - depends on SOC_SP7021 || COMPILE_TEST > +config UNIPHIER_EFUSE > + tristate "UniPhier SoCs eFuse support" > + depends on ARCH_UNIPHIER || COMPILE_TEST > depends on HAS_IOMEM > help > - This is a driver for the On-chip OTP controller (OCOTP) available > - on Sunplus SoCs. It provides access to 128 bytes of one-time > - programmable eFuse. > + This is a simple driver to dump specified values of UniPhier SoC > + from eFuse. > > This driver can also be built as a module. If so, the module > - will be called nvmem-sunplus-ocotp. > - > -config NVMEM_APPLE_EFUSES > - tristate "Apple eFuse support" > - depends on ARCH_APPLE || COMPILE_TEST > - default ARCH_APPLE > - help > - Say y here to enable support for reading eFuses on Apple SoCs > - such as the M1. These are e.g. used to store factory programmed > - calibration data required for the PCIe or the USB-C PHY. > - > - This driver can also be built as a module. If so, the module will > - be called nvmem-apple-efuses. > - > -config NVMEM_U_BOOT_ENV > - tristate "U-Boot environment variables support" > - depends on OF && MTD > - select CRC32 > - help > - U-Boot stores its setup as environment variables. This driver adds > - support for verifying & exporting such data. It also exposes variables > - as NVMEM cells so they can be referenced by other drivers. > - > - Currently this drivers works only with env variables on top of MTD. > - > - If compiled as module it will be called nvmem_u-boot-env. > + will be called nvmem-uniphier-efuse. > > endif > diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile > index 399f9972d45b..53a6ca1d0e01 100644 > --- a/drivers/nvmem/Makefile > +++ b/drivers/nvmem/Makefile > @@ -7,67 +7,67 @@ obj-$(CONFIG_NVMEM) += nvmem_core.o > nvmem_core-y := core.o > > # Devices > -obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o > -nvmem-bcm-ocotp-y := bcm-ocotp.o > -obj-$(CONFIG_NVMEM_IMX_IIM) += nvmem-imx-iim.o > -nvmem-imx-iim-y := imx-iim.o > -obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o > -nvmem-imx-ocotp-y := imx-ocotp.o > -obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU) += nvmem-imx-ocotp-scu.o > -nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o > obj-$(CONFIG_JZ4780_EFUSE) += nvmem_jz4780_efuse.o > -nvmem_jz4780_efuse-y := jz4780-efuse.o > +nvmem_jz4780_efuse-y := jz4780-efuse.o > +obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o > +nvmem_meson_efuse-y := meson-efuse.o > +obj-$(CONFIG_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o > +nvmem_meson_mx_efuse-y := meson-mx-efuse.o > +obj-$(CONFIG_MICROCHIP_OTPC) += nvmem-microchip-otpc.o > +nvmem-microchip-otpc-y := microchip-otpc.o > +obj-$(CONFIG_MTK_EFUSE) += nvmem_mtk-efuse.o > +nvmem_mtk-efuse-y := mtk-efuse.o > +obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o > +nvmem-apple-efuses-y := apple-efuses.o > +obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o > +nvmem-bcm-ocotp-y := bcm-ocotp.o > +obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o > +nvmem_brcm_nvram-y := brcm_nvram.o > +obj-$(CONFIG_NVMEM_IMX_IIM) += nvmem-imx-iim.o > +nvmem-imx-iim-y := imx-iim.o > +obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o > +nvmem-imx-ocotp-y := imx-ocotp.o > +obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU) += nvmem-imx-ocotp-scu.o > +nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o > +obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP) += nvmem-layerscape-sfp.o > +nvmem-layerscape-sfp-y := layerscape-sfp.o > obj-$(CONFIG_NVMEM_LPC18XX_EEPROM) += nvmem_lpc18xx_eeprom.o > -nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o > -obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o > -nvmem_lpc18xx_otp-y := lpc18xx_otp.o > -obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o > -nvmem-mxs-ocotp-y := mxs-ocotp.o > +nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o > +obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o > +nvmem_lpc18xx_otp-y := lpc18xx_otp.o > +obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o > +nvmem-mxs-ocotp-y := mxs-ocotp.o > obj-$(CONFIG_NVMEM_NINTENDO_OTP) += nvmem-nintendo-otp.o > -nvmem-nintendo-otp-y := nintendo-otp.o > -obj-$(CONFIG_MTK_EFUSE) += nvmem_mtk-efuse.o > -nvmem_mtk-efuse-y := mtk-efuse.o > -obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o > -nvmem_qfprom-y := qfprom.o > -obj-$(CONFIG_NVMEM_SPMI_SDAM) += nvmem_qcom-spmi-sdam.o > -nvmem_qcom-spmi-sdam-y += qcom-spmi-sdam.o > -obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o > -nvmem_rockchip_efuse-y := rockchip-efuse.o > -obj-$(CONFIG_ROCKCHIP_OTP) += nvmem-rockchip-otp.o > -nvmem-rockchip-otp-y := rockchip-otp.o > -obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o > -nvmem_stm32_romem-y := stm32-romem.o > -obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o > -nvmem_sunxi_sid-y := sunxi_sid.o > -obj-$(CONFIG_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o > -nvmem-uniphier-efuse-y := uniphier-efuse.o > -obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o > -nvmem-vf610-ocotp-y := vf610-ocotp.o > -obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o > -nvmem_meson_efuse-y := meson-efuse.o > -obj-$(CONFIG_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o > -nvmem_meson_mx_efuse-y := meson-mx-efuse.o > -obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o > -nvmem_snvs_lpgpr-y := snvs_lpgpr.o > -obj-$(CONFIG_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o > -nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o > -obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o > -nvmem-sc27xx-efuse-y := sc27xx-efuse.o > -obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o > -nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o > -obj-$(CONFIG_SPRD_EFUSE) += nvmem_sprd_efuse.o > -nvmem_sprd_efuse-y := sprd-efuse.o > -obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o > -nvmem-rmem-y := rmem.o > -obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o > -nvmem_brcm_nvram-y := brcm_nvram.o > -obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP) += nvmem-layerscape-sfp.o > -nvmem-layerscape-sfp-y := layerscape-sfp.o > +nvmem-nintendo-otp-y := nintendo-otp.o > +obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o > +nvmem-rmem-y := rmem.o > +obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o > +nvmem_snvs_lpgpr-y := snvs_lpgpr.o > +obj-$(CONFIG_NVMEM_SPMI_SDAM) += nvmem_qcom-spmi-sdam.o > +nvmem_qcom-spmi-sdam-y += qcom-spmi-sdam.o > +obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o > +nvmem_stm32_romem-y := stm32-romem.o > obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP) += nvmem_sunplus_ocotp.o > -nvmem_sunplus_ocotp-y := sunplus-ocotp.o > -obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o > -nvmem-apple-efuses-y := apple-efuses.o > -obj-$(CONFIG_MICROCHIP_OTPC) += nvmem-microchip-otpc.o > -nvmem-microchip-otpc-y := microchip-otpc.o > -obj-$(CONFIG_NVMEM_U_BOOT_ENV) += nvmem_u-boot-env.o > -nvmem_u-boot-env-y := u-boot-env.o > +nvmem_sunplus_ocotp-y := sunplus-ocotp.o > +obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o > +nvmem_sunxi_sid-y := sunxi_sid.o > +obj-$(CONFIG_NVMEM_U_BOOT_ENV) += nvmem_u-boot-env.o > +nvmem_u-boot-env-y := u-boot-env.o > +obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o > +nvmem-vf610-ocotp-y := vf610-ocotp.o > +obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o > +nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o > +obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o > +nvmem_qfprom-y := qfprom.o > +obj-$(CONFIG_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o > +nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o > +obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o > +nvmem_rockchip_efuse-y := rockchip-efuse.o > +obj-$(CONFIG_ROCKCHIP_OTP) += nvmem-rockchip-otp.o > +nvmem-rockchip-otp-y := rockchip-otp.o > +obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o > +nvmem-sc27xx-efuse-y := sc27xx-efuse.o > +obj-$(CONFIG_SPRD_EFUSE) += nvmem_sprd_efuse.o > +nvmem_sprd_efuse-y := sprd-efuse.o > +obj-$(CONFIG_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o > +nvmem-uniphier-efuse-y := uniphier-efuse.o
© 2016 - 2024 Red Hat, Inc.