[v2] pinctrl: add support for SM8450 LPASS LPI pinctrl

[PATCH v2 0/2] pinctrl: add support for SM8450 LPASS LPI pinctrl

Srinivas Kandagatla posted 2 patches 3 years, 7 months ago

Diff against v1 v3
Download series mbox

There is a newer version of this series

.../qcom,sm8450-lpass-lpi-pinctrl.yaml        | 136 ++++++++++
drivers/pinctrl/qcom/Kconfig                  |   9 +
drivers/pinctrl/qcom/Makefile                 |   1 +
.../pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c   | 240 ++++++++++++++++++
4 files changed, 386 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c

Expand all Fold all

[PATCH v2 0/2] pinctrl: add support for SM8450 LPASS LPI pinctrl

Posted by Srinivas Kandagatla 3 years, 7 months ago

This patchset adds pinctrl driver to support pin configuration for LPASS
(Low Power Audio SubSystem) LPI (Low Power Island) pinctrl on SM8450.
    
This IP is an additional pin control block for Audio Pins on top the
existing SoC Top level pin-controller.
    
Tested this on SM8450 MTP

Thanks,
Srini

Changes since v1:
	- no code changes only minor fixes to bindings as suggested by Rob

Srinivas Kandagatla (2):
  dt-bindings: pinctrl: qcom: Add sm8450 lpass lpi pinctrl bindings
  pinctrl: qcom: Add sm8450 lpass lpi pinctrl driver

 .../qcom,sm8450-lpass-lpi-pinctrl.yaml        | 136 ++++++++++
 drivers/pinctrl/qcom/Kconfig                  |   9 +
 drivers/pinctrl/qcom/Makefile                 |   1 +
 .../pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c   | 240 ++++++++++++++++++
 4 files changed, 386 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
 create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c

-- 
2.21.0