From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
[ Upstream commit 8d8be8dd7c1f5d50f84ecc7a6a41962da48c6164 ]
The remoteproc configuration in qcom-msm8974.dtsi is incomplete because
it lacks the regulator supplies that should be added in the board DT
files. Some of the msm8974 boards are currently missing the regulator
supplies and should have the remoteprocs disabled to avoid making use
of the incomplete configuration.
This also fixes dtbs_check warnings after moving "qcom,msm8974-mss-pil"
to DT schema, which rightfully complains that the -supply properties
are missing for some boards:
qcom-apq8074-dragonboard.dtb:
remoteproc@fc880000: 'pll-supply' is a required property
From schema: remoteproc/qcom,msm8916-mss-pil.yaml
remoteproc@fc880000: 'mss-supply' is a required property
From schema: remoteproc/qcom,msm8916-mss-pil.yaml
remoteproc@fc880000: 'oneOf' conditional failed, one must be fixed:
'power-domains' is a required property
'power-domain-names' is a required property, or
'cx-supply' is a required property
'mx-supply' is a required property
Cc: Luca Weiss <luca@z3ntu.xyz>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes: f300826d27be ("ARM: dts: qcom-msm8974: Sort and clean up nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712124421.3129206-4-stephan.gerhold@kernkonzept.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 2 ++
arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts | 2 ++
arch/arm/boot/dts/qcom-msm8974.dtsi | 4 ++++
3 files changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
index 32975f56f896..085591183592 100644
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -132,10 +132,12 @@ wcnss {
};
&remoteproc_adsp {
+ status = "okay";
cx-supply = <&pm8841_s2>;
};
&remoteproc_mss {
+ status = "okay";
cx-supply = <&pm8841_s2>;
mss-supply = <&pm8841_s3>;
mx-supply = <&pm8841_s1>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index 3b1ea8c24f57..9ef5a68747f1 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -467,10 +467,12 @@ fuelgauge_pin: fuelgauge-int-pin {
};
&remoteproc_adsp {
+ status = "okay";
cx-supply = <&pma8084_s2>;
};
&remoteproc_mss {
+ status = "okay";
cx-supply = <&pma8084_s2>;
mss-supply = <&pma8084_s6>;
mx-supply = <&pma8084_s1>;
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 7a25d313e4fb..05a36566bd52 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1150,6 +1150,8 @@ remoteproc_mss: remoteproc@fc880000 {
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
+ status = "disabled";
+
mba {
memory-region = <&mba_region>;
};
@@ -1401,6 +1403,8 @@ remoteproc_adsp: remoteproc@fe200000 {
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
+ status = "disabled";
+
smd-edge {
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
--
2.35.1