drivers/usb/typec/altmodes/displayport.c | 4 ++-- include/linux/usb/typec_dp.h | 5 +++++ 2 files changed, 7 insertions(+), 2 deletions(-)
From: Pablo Sun <pablo.sun@mediatek.com>
From: Pablo Sun <pablo.sun@mediatek.com>
Fix incorrect pin assignment values when connecting to a monitor with
Type-C receptacle instead of a plug.
According to specification, an UFP_D receptacle's pin assignment
should came from the UFP_D pin assignments field (bit 23:16), while
an UFP_D plug's assignments are described in the DFP_D pin assignments
(bit 15:8) during Mode Discovery.
For example the LG 27 UL850-W is a monitor with Type-C receptacle.
The monitor responds to MODE DISCOVERY command with following
DisplayPort Capability flag:
dp->alt->vdo=0x140045
The existing logic only take cares of UPF_D plug case,
and would take the bit 15:8 for this 0x140045 case.
This results in an non-existing pin assignment 0x0 in
dp_altmode_configure.
To fix this problem a new set of macros are introduced
to take plug/receptacle differences into consideration.
Co-developed-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Cc: stable@vger.kernel.org
---
drivers/usb/typec/altmodes/displayport.c | 4 ++--
include/linux/usb/typec_dp.h | 5 +++++
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
index 9360ca177c7d..8dd0e505ef99 100644
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -98,8 +98,8 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con)
case DP_STATUS_CON_UFP_D:
case DP_STATUS_CON_BOTH: /* NOTE: First acting as DP source */
conf |= DP_CONF_UFP_U_AS_UFP_D;
- pin_assign = DP_CAP_DFP_D_PIN_ASSIGN(dp->alt->vdo) &
- DP_CAP_UFP_D_PIN_ASSIGN(dp->port->vdo);
+ pin_assign = DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo) &
+ DP_CAP_PIN_ASSIGN_DFP_D(dp->port->vdo);
break;
default:
break;
diff --git a/include/linux/usb/typec_dp.h b/include/linux/usb/typec_dp.h
index cfb916cccd31..8d09c2f0a9b8 100644
--- a/include/linux/usb/typec_dp.h
+++ b/include/linux/usb/typec_dp.h
@@ -73,6 +73,11 @@ enum {
#define DP_CAP_USB BIT(7)
#define DP_CAP_DFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(15, 8)) >> 8)
#define DP_CAP_UFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(23, 16)) >> 16)
+/* Get pin assignment taking plug & receptacle into consideration */
+#define DP_CAP_PIN_ASSIGN_UFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \
+ DP_CAP_UFP_D_PIN_ASSIGN(_cap_) : DP_CAP_DFP_D_PIN_ASSIGN(_cap_))
+#define DP_CAP_PIN_ASSIGN_DFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \
+ DP_CAP_DFP_D_PIN_ASSIGN(_cap_) : DP_CAP_UFP_D_PIN_ASSIGN(_cap_))
/* DisplayPort Status Update VDO bits */
#define DP_STATUS_CONNECTION(_status_) ((_status_) & 3)
--
2.18.0
Hi guys, On Wed, Jul 27, 2022 at 07:05:03PM +0800, Macpaul Lin wrote: > From: Pablo Sun <pablo.sun@mediatek.com> > > From: Pablo Sun <pablo.sun@mediatek.com> Looks like there's something wrong with the formating of the patch here? > Fix incorrect pin assignment values when connecting to a monitor with > Type-C receptacle instead of a plug. > > According to specification, an UFP_D receptacle's pin assignment > should came from the UFP_D pin assignments field (bit 23:16), while > an UFP_D plug's assignments are described in the DFP_D pin assignments > (bit 15:8) during Mode Discovery. > > For example the LG 27 UL850-W is a monitor with Type-C receptacle. > The monitor responds to MODE DISCOVERY command with following > DisplayPort Capability flag: > > dp->alt->vdo=0x140045 > > The existing logic only take cares of UPF_D plug case, > and would take the bit 15:8 for this 0x140045 case. > > This results in an non-existing pin assignment 0x0 in > dp_altmode_configure. > > To fix this problem a new set of macros are introduced > to take plug/receptacle differences into consideration. > > Co-developed-by: Pablo Sun <pablo.sun@mediatek.com> > Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> > Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com> > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> > Reviewed-by: Guillaume Ranquet <granquet@baylibre.com> > Cc: stable@vger.kernel.org If this is a fix, then you need to have the "Fixes" tag that tells which commit the patch is fixing. > --- > drivers/usb/typec/altmodes/displayport.c | 4 ++-- > include/linux/usb/typec_dp.h | 5 +++++ > 2 files changed, 7 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c > index 9360ca177c7d..8dd0e505ef99 100644 > --- a/drivers/usb/typec/altmodes/displayport.c > +++ b/drivers/usb/typec/altmodes/displayport.c > @@ -98,8 +98,8 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con) > case DP_STATUS_CON_UFP_D: > case DP_STATUS_CON_BOTH: /* NOTE: First acting as DP source */ > conf |= DP_CONF_UFP_U_AS_UFP_D; > - pin_assign = DP_CAP_DFP_D_PIN_ASSIGN(dp->alt->vdo) & > - DP_CAP_UFP_D_PIN_ASSIGN(dp->port->vdo); > + pin_assign = DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo) & > + DP_CAP_PIN_ASSIGN_DFP_D(dp->port->vdo); > break; > default: > break; > diff --git a/include/linux/usb/typec_dp.h b/include/linux/usb/typec_dp.h > index cfb916cccd31..8d09c2f0a9b8 100644 > --- a/include/linux/usb/typec_dp.h > +++ b/include/linux/usb/typec_dp.h > @@ -73,6 +73,11 @@ enum { > #define DP_CAP_USB BIT(7) > #define DP_CAP_DFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(15, 8)) >> 8) > #define DP_CAP_UFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(23, 16)) >> 16) > +/* Get pin assignment taking plug & receptacle into consideration */ > +#define DP_CAP_PIN_ASSIGN_UFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \ > + DP_CAP_UFP_D_PIN_ASSIGN(_cap_) : DP_CAP_DFP_D_PIN_ASSIGN(_cap_)) > +#define DP_CAP_PIN_ASSIGN_DFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \ > + DP_CAP_DFP_D_PIN_ASSIGN(_cap_) : DP_CAP_UFP_D_PIN_ASSIGN(_cap_)) > > /* DisplayPort Status Update VDO bits */ > #define DP_STATUS_CONNECTION(_status_) ((_status_) & 3) > -- > 2.18.0 thanks, -- heikki
On 8/2/22 3:28 PM, Heikki Krogerus wrote: > Hi guys, > > On Wed, Jul 27, 2022 at 07:05:03PM +0800, Macpaul Lin wrote: >> From: Pablo Sun <pablo.sun@mediatek.com> >> >> From: Pablo Sun <pablo.sun@mediatek.com> > > Looks like there's something wrong with the formating of the patch > here? The duplicated line will be removed in patch v2. >> Fix incorrect pin assignment values when connecting to a monitor with >> Type-C receptacle instead of a plug. >> >> According to specification, an UFP_D receptacle's pin assignment >> should came from the UFP_D pin assignments field (bit 23:16), while >> an UFP_D plug's assignments are described in the DFP_D pin assignments >> (bit 15:8) during Mode Discovery. >> >> For example the LG 27 UL850-W is a monitor with Type-C receptacle. >> The monitor responds to MODE DISCOVERY command with following >> DisplayPort Capability flag: >> >> dp->alt->vdo=0x140045 >> >> The existing logic only take cares of UPF_D plug case, >> and would take the bit 15:8 for this 0x140045 case. >> >> This results in an non-existing pin assignment 0x0 in >> dp_altmode_configure. >> >> To fix this problem a new set of macros are introduced >> to take plug/receptacle differences into consideration. >> >> Co-developed-by: Pablo Sun <pablo.sun@mediatek.com> >> Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> >> Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com> >> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> >> Reviewed-by: Guillaume Ranquet <granquet@baylibre.com> >> Cc: stable@vger.kernel.org > > If this is a fix, then you need to have the "Fixes" tag that tells > which commit the patch is fixing. Thanks for the review. Will add "Fixes" tag and "Reviewed-by" tags in patch v2. >> --- >> drivers/usb/typec/altmodes/displayport.c | 4 ++-- >> include/linux/usb/typec_dp.h | 5 +++++ >> 2 files changed, 7 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c >> index 9360ca177c7d..8dd0e505ef99 100644 >> --- a/drivers/usb/typec/altmodes/displayport.c >> +++ b/drivers/usb/typec/altmodes/displayport.c >> @@ -98,8 +98,8 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con) >> case DP_STATUS_CON_UFP_D: >> case DP_STATUS_CON_BOTH: /* NOTE: First acting as DP source */ >> conf |= DP_CONF_UFP_U_AS_UFP_D; >> - pin_assign = DP_CAP_DFP_D_PIN_ASSIGN(dp->alt->vdo) & >> - DP_CAP_UFP_D_PIN_ASSIGN(dp->port->vdo); >> + pin_assign = DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo) & >> + DP_CAP_PIN_ASSIGN_DFP_D(dp->port->vdo); >> break; >> default: >> break; >> diff --git a/include/linux/usb/typec_dp.h b/include/linux/usb/typec_dp.h >> index cfb916cccd31..8d09c2f0a9b8 100644 >> --- a/include/linux/usb/typec_dp.h >> +++ b/include/linux/usb/typec_dp.h >> @@ -73,6 +73,11 @@ enum { >> #define DP_CAP_USB BIT(7) >> #define DP_CAP_DFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(15, 8)) >> 8) >> #define DP_CAP_UFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(23, 16)) >> 16) >> +/* Get pin assignment taking plug & receptacle into consideration */ >> +#define DP_CAP_PIN_ASSIGN_UFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \ >> + DP_CAP_UFP_D_PIN_ASSIGN(_cap_) : DP_CAP_DFP_D_PIN_ASSIGN(_cap_)) >> +#define DP_CAP_PIN_ASSIGN_DFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \ >> + DP_CAP_DFP_D_PIN_ASSIGN(_cap_) : DP_CAP_UFP_D_PIN_ASSIGN(_cap_)) >> >> /* DisplayPort Status Update VDO bits */ >> #define DP_STATUS_CONNECTION(_status_) ((_status_) & 3) >> -- >> 2.18.0 > > thanks, > Thanks. Macpaul Lin
From: Pablo Sun <pablo.sun@mediatek.com>
Fix incorrect pin assignment values when connecting to a monitor with
Type-C receptacle instead of a plug.
According to specification, an UFP_D receptacle's pin assignment
should came from the UFP_D pin assignments field (bit 23:16), while
an UFP_D plug's assignments are described in the DFP_D pin assignments
(bit 15:8) during Mode Discovery.
For example the LG 27 UL850-W is a monitor with Type-C receptacle.
The monitor responds to MODE DISCOVERY command with following
DisplayPort Capability flag:
dp->alt->vdo=0x140045
The existing logic only take cares of UPF_D plug case,
and would take the bit 15:8 for this 0x140045 case.
This results in an non-existing pin assignment 0x0 in
dp_altmode_configure.
To fix this problem a new set of macros are introduced
to take plug/receptacle differences into consideration.
Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Co-developed-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable@vger.kernel.org
---
Changes in v2:
- Fix commit message.
- Remove duplicate "From:" tag.
- Add "Fixes:" tag.
- Add more "Reviewed-by:" tag.
drivers/usb/typec/altmodes/displayport.c | 4 ++--
include/linux/usb/typec_dp.h | 5 +++++
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
index 9360ca177c7d..8dd0e505ef99 100644
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -98,8 +98,8 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con)
case DP_STATUS_CON_UFP_D:
case DP_STATUS_CON_BOTH: /* NOTE: First acting as DP source */
conf |= DP_CONF_UFP_U_AS_UFP_D;
- pin_assign = DP_CAP_DFP_D_PIN_ASSIGN(dp->alt->vdo) &
- DP_CAP_UFP_D_PIN_ASSIGN(dp->port->vdo);
+ pin_assign = DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo) &
+ DP_CAP_PIN_ASSIGN_DFP_D(dp->port->vdo);
break;
default:
break;
diff --git a/include/linux/usb/typec_dp.h b/include/linux/usb/typec_dp.h
index cfb916cccd31..8d09c2f0a9b8 100644
--- a/include/linux/usb/typec_dp.h
+++ b/include/linux/usb/typec_dp.h
@@ -73,6 +73,11 @@ enum {
#define DP_CAP_USB BIT(7)
#define DP_CAP_DFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(15, 8)) >> 8)
#define DP_CAP_UFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(23, 16)) >> 16)
+/* Get pin assignment taking plug & receptacle into consideration */
+#define DP_CAP_PIN_ASSIGN_UFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \
+ DP_CAP_UFP_D_PIN_ASSIGN(_cap_) : DP_CAP_DFP_D_PIN_ASSIGN(_cap_))
+#define DP_CAP_PIN_ASSIGN_DFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \
+ DP_CAP_DFP_D_PIN_ASSIGN(_cap_) : DP_CAP_UFP_D_PIN_ASSIGN(_cap_))
/* DisplayPort Status Update VDO bits */
#define DP_STATUS_CONNECTION(_status_) ((_status_) & 3)
--
2.18.0
© 2016 - 2024 Red Hat, Inc.