[v8] Add LVTS architecture thermal

[PATCH v8 1/6] thermal: mediatek: Relocate driver to mediatek folder

Posted by Balsam CHIHI 3 years, 6 months ago

Add Mediatek proprietary folder to upstream more thermal zone and cooler
drivers. Relocate the original thermal controller driver to it and rename
as soc_temp.c to show its purpose more clearly.

Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
---
 drivers/thermal/Kconfig                       | 14 ++++-------
 drivers/thermal/Makefile                      |  2 +-
 drivers/thermal/mediatek/Kconfig              | 23 +++++++++++++++++++
 drivers/thermal/mediatek/Makefile             |  1 +
 .../{mtk_thermal.c => mediatek/soc_temp.c}    |  0
 5 files changed, 29 insertions(+), 11 deletions(-)
 create mode 100644 drivers/thermal/mediatek/Kconfig
 create mode 100644 drivers/thermal/mediatek/Makefile
 rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 0e5cc948373c..ecba8d6e313b 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -412,16 +412,10 @@ config DA9062_THERMAL
 	  zone.
 	  Compatible with the DA9062 and DA9061 PMICs.
 
-config MTK_THERMAL
-	tristate "Temperature sensor driver for mediatek SoCs"
-	depends on ARCH_MEDIATEK || COMPILE_TEST
-	depends on HAS_IOMEM
-	depends on NVMEM || NVMEM=n
-	depends on RESET_CONTROLLER
-	default y
-	help
-	  Enable this option if you want to have support for thermal management
-	  controller present in Mediatek SoCs
+menu "Mediatek thermal drivers"
+depends on ARCH_MEDIATEK || COMPILE_TEST
+source "drivers/thermal/mediatek/Kconfig"
+endmenu
 
 config AMLOGIC_THERMAL
 	tristate "Amlogic Thermal Support"
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index def8e1a0399c..3c00e864ad55 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -55,7 +55,7 @@ obj-y				+= st/
 obj-$(CONFIG_QCOM_TSENS)	+= qcom/
 obj-y				+= tegra/
 obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
-obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
+obj-$(CONFIG_MTK_THERMAL)	+= mediatek/
 obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
 obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
 obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
new file mode 100644
index 000000000000..9c41e9079fc3
--- /dev/null
+++ b/drivers/thermal/mediatek/Kconfig
@@ -0,0 +1,23 @@
+config MTK_THERMAL
+	tristate "MediaTek thermal drivers"
+	depends on THERMAL_OF
+	help
+		This is the option for MediaTek thermal software
+		solutions. Please enable corresponding options to
+		get temperature information from thermal sensors or
+		turn on throttle mechaisms for thermal mitigation.
+
+if MTK_THERMAL
+
+config MTK_SOC_THERMAL
+	tristate "Temperature sensor driver for MediaTek SoCs"
+	depends on HAS_IOMEM
+	depends on NVMEM
+	depends on RESET_CONTROLLER
+	help
+		Enable this option if you want to get SoC temperature
+		information for MediaTek platforms. This driver
+		configures thermal controllers to collect temperature
+		via AUXADC interface.
+
+endif
diff --git a/drivers/thermal/mediatek/Makefile b/drivers/thermal/mediatek/Makefile
new file mode 100644
index 000000000000..4b4cb04a358f
--- /dev/null
+++ b/drivers/thermal/mediatek/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MTK_SOC_THERMAL)		+= soc_temp.o
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mediatek/soc_temp.c
similarity index 100%
rename from drivers/thermal/mtk_thermal.c
rename to drivers/thermal/mediatek/soc_temp.c
-- 
2.34.1

Re: [PATCH v8 1/6] thermal: mediatek: Relocate driver to mediatek folder

Posted by Daniel Lezcano 3 years, 6 months ago

Hi Balsam,

On 26/07/2022 15:55, Balsam CHIHI wrote:
> Add Mediatek proprietary folder to upstream more thermal zone and cooler
> drivers. Relocate the original thermal controller driver to it and rename
> as soc_temp.c to show its purpose more clearly.

I realize the Kconfig, Makefiles format are not consistent across the 
boards. Before I fix this, you can comply to the format:

drivers/thermal/Kconfig:

menu "Mediatek thermal drivers"
depends on ARCH_MEDIATEK || COMPILE_TEST
source "drivers/thermal/mediatek/Kconfig"
endmenu

drivers/thermal/Makefile:

-obj-$(CONFIG_MTK_THERMAL)      += mtk_thermal.o
+obj-y                          += mediatek

drivers/thermal/mediatek/Kconfig:

config MTK_SOC_THERMAL
	tristate "Temperature sensor driver for MediaTek SoCs"
	depends on HAS_IOMEM
	depends on NVMEM
	depends on RESET_CONTROLLER
	help
		Enable this option if you want to get SoC temperature
		information for MediaTek platforms. This driver
		configures thermal controllers to collect temperature
		via AUXADC interface.

drivers/thermal/mediatek/Makefile:

obj-$(MTK_SOC_THERMAL)	+= soc_temp.o

However, rename 'soc_temp' to something more SoC explicit, eg. 
mtxxx_thermal.c

Thanks

   -- Daniel


> Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>

> ---
>   drivers/thermal/Kconfig                       | 14 ++++-------
>   drivers/thermal/Makefile                      |  2 +-
>   drivers/thermal/mediatek/Kconfig              | 23 +++++++++++++++++++
>   drivers/thermal/mediatek/Makefile             |  1 +
>   .../{mtk_thermal.c => mediatek/soc_temp.c}    |  0
>   5 files changed, 29 insertions(+), 11 deletions(-)
>   create mode 100644 drivers/thermal/mediatek/Kconfig
>   create mode 100644 drivers/thermal/mediatek/Makefile
>   rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 0e5cc948373c..ecba8d6e313b 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -412,16 +412,10 @@ config DA9062_THERMAL
>   	  zone.
>   	  Compatible with the DA9062 and DA9061 PMICs.
>   
> -config MTK_THERMAL
> -	tristate "Temperature sensor driver for mediatek SoCs"
> -	depends on ARCH_MEDIATEK || COMPILE_TEST
> -	depends on HAS_IOMEM
> -	depends on NVMEM || NVMEM=n
> -	depends on RESET_CONTROLLER
> -	default y
> -	help
> -	  Enable this option if you want to have support for thermal management
> -	  controller present in Mediatek SoCs
> +menu "Mediatek thermal drivers"
> +depends on ARCH_MEDIATEK || COMPILE_TEST
> +source "drivers/thermal/mediatek/Kconfig"
> +endmenu
>   
>   config AMLOGIC_THERMAL
>   	tristate "Amlogic Thermal Support"
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index def8e1a0399c..3c00e864ad55 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -55,7 +55,7 @@ obj-y				+= st/
>   obj-$(CONFIG_QCOM_TSENS)	+= qcom/
>   obj-y				+= tegra/
>   obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
> -obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
> +obj-$(CONFIG_MTK_THERMAL)	+= mediatek/
>   obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
>   obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
>   obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
> diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
> new file mode 100644
> index 000000000000..9c41e9079fc3
> --- /dev/null
> +++ b/drivers/thermal/mediatek/Kconfig
> @@ -0,0 +1,23 @@
> +config MTK_THERMAL
> +	tristate "MediaTek thermal drivers"
> +	depends on THERMAL_OF
> +	help
> +		This is the option for MediaTek thermal software
> +		solutions. Please enable corresponding options to
> +		get temperature information from thermal sensors or
> +		turn on throttle mechaisms for thermal mitigation.
> +
> +if MTK_THERMAL
> +
> +config MTK_SOC_THERMAL
> +	tristate "Temperature sensor driver for MediaTek SoCs"
> +	depends on HAS_IOMEM
> +	depends on NVMEM
> +	depends on RESET_CONTROLLER
> +	help
> +		Enable this option if you want to get SoC temperature
> +		information for MediaTek platforms. This driver
> +		configures thermal controllers to collect temperature
> +		via AUXADC interface.
> +
> +endif
> diff --git a/drivers/thermal/mediatek/Makefile b/drivers/thermal/mediatek/Makefile
> new file mode 100644
> index 000000000000..4b4cb04a358f
> --- /dev/null
> +++ b/drivers/thermal/mediatek/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_MTK_SOC_THERMAL)		+= soc_temp.o
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mediatek/soc_temp.c
> similarity index 100%
> rename from drivers/thermal/mtk_thermal.c
> rename to drivers/thermal/mediatek/soc_temp.c


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v8 1/6] thermal: mediatek: Relocate driver to mediatek folder

Posted by Balsam CHIHI 3 years, 6 months ago

On Thu, Jul 28, 2022 at 10:53 AM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
>
> Hi Balsam,
>
> On 26/07/2022 15:55, Balsam CHIHI wrote:
> > Add Mediatek proprietary folder to upstream more thermal zone and cooler
> > drivers. Relocate the original thermal controller driver to it and rename
> > as soc_temp.c to show its purpose more clearly.
>
> I realize the Kconfig, Makefiles format are not consistent across the
> boards. Before I fix this, you can comply to the format:
>
> drivers/thermal/Kconfig:
>
> menu "Mediatek thermal drivers"
> depends on ARCH_MEDIATEK || COMPILE_TEST
> source "drivers/thermal/mediatek/Kconfig"
> endmenu
>
> drivers/thermal/Makefile:
>
> -obj-$(CONFIG_MTK_THERMAL)      += mtk_thermal.o
> +obj-y                          += mediatek
>
> drivers/thermal/mediatek/Kconfig:
>
> config MTK_SOC_THERMAL
>         tristate "Temperature sensor driver for MediaTek SoCs"
>         depends on HAS_IOMEM
>         depends on NVMEM
>         depends on RESET_CONTROLLER
>         help
>                 Enable this option if you want to get SoC temperature
>                 information for MediaTek platforms. This driver
>                 configures thermal controllers to collect temperature
>                 via AUXADC interface.
>
> drivers/thermal/mediatek/Makefile:
>
> obj-$(MTK_SOC_THERMAL)  += soc_temp.o
>
> However, rename 'soc_temp' to something more SoC explicit, eg.
> mtxxx_thermal.c
>
> Thanks
>
>    -- Daniel

Hello Daniel,

Thank you for the feedback.
Changes have been made as you suggested.
Resubmitting seen.

Best regards.
Balsam.

Re: [PATCH v8 1/6] thermal: mediatek: Relocate driver to mediatek folder

Posted by Balsam CHIHI 3 years, 6 months ago

On Fri, Jul 29, 2022 at 5:19 PM Balsam CHIHI <bchihi@baylibre.com> wrote:
>
> On Thu, Jul 28, 2022 at 10:53 AM Daniel Lezcano
> <daniel.lezcano@linaro.org> wrote:
> >
> >
> > Hi Balsam,
> >
> > On 26/07/2022 15:55, Balsam CHIHI wrote:
> > > Add Mediatek proprietary folder to upstream more thermal zone and cooler
> > > drivers. Relocate the original thermal controller driver to it and rename
> > > as soc_temp.c to show its purpose more clearly.
> >
> > I realize the Kconfig, Makefiles format are not consistent across the
> > boards. Before I fix this, you can comply to the format:
> >
> > drivers/thermal/Kconfig:
> >
> > menu "Mediatek thermal drivers"
> > depends on ARCH_MEDIATEK || COMPILE_TEST
> > source "drivers/thermal/mediatek/Kconfig"
> > endmenu
> >
> > drivers/thermal/Makefile:
> >
> > -obj-$(CONFIG_MTK_THERMAL)      += mtk_thermal.o
> > +obj-y                          += mediatek
> >
> > drivers/thermal/mediatek/Kconfig:
> >
> > config MTK_SOC_THERMAL
> >         tristate "Temperature sensor driver for MediaTek SoCs"
> >         depends on HAS_IOMEM
> >         depends on NVMEM
> >         depends on RESET_CONTROLLER
> >         help
> >                 Enable this option if you want to get SoC temperature
> >                 information for MediaTek platforms. This driver
> >                 configures thermal controllers to collect temperature
> >                 via AUXADC interface.
> >
> > drivers/thermal/mediatek/Makefile:
> >
> > obj-$(MTK_SOC_THERMAL)  += soc_temp.o
> >
> > However, rename 'soc_temp' to something more SoC explicit, eg.
> > mtxxx_thermal.c
> >
> > Thanks
> >
> >    -- Daniel
>
> Hello Daniel,
>
> Thank you for the feedback.
> Changes have been made as you suggested.
> Resubmitting seen.
*soon.
>
> Best regards.
> Balsam.

Re: [PATCH v8 1/6] thermal: mediatek: Relocate driver to mediatek folder

Posted by Daniel Lezcano 3 years, 6 months ago

Hi Balsam,

On 29/07/2022 17:21, Balsam CHIHI wrote:
> On Fri, Jul 29, 2022 at 5:19 PM Balsam CHIHI <bchihi@baylibre.com> wrote:

[ ... ]

>>> config MTK_SOC_THERMAL
>>>          tristate "Temperature sensor driver for MediaTek SoCs"
>>>          depends on HAS_IOMEM
>>>          depends on NVMEM
>>>          depends on RESET_CONTROLLER
>>>          help
>>>                  Enable this option if you want to get SoC temperature
>>>                  information for MediaTek platforms. This driver
>>>                  configures thermal controllers to collect temperature
>>>                  via AUXADC interface.
>>>
>>> drivers/thermal/mediatek/Makefile:
>>>
>>> obj-$(MTK_SOC_THERMAL)  += soc_temp.o
>>>
>>> However, rename 'soc_temp' to something more SoC explicit, eg.
>>> mtxxx_thermal.c
>>>
>>> Thanks
>>>
>>>     -- Daniel
>>
>> Hello Daniel,
>>
>> Thank you for the feedback.
>> Changes have been made as you suggested.
>> Resubmitting seen.
> *soon.

You may want to wait next week before sending a new version, I'm still 
reviewing your series (note you can send it anyway if you prefer)

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v8 1/6] thermal: mediatek: Relocate driver to mediatek folder

Posted by Balsam CHIHI 3 years, 6 months ago

On Fri, Jul 29, 2022 at 5:35 PM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
> Hi Balsam,
>
> On 29/07/2022 17:21, Balsam CHIHI wrote:
>
> [ ... ]
>
> You may want to wait next week before sending a new version, I'm still
> reviewing your series (note you can send it anyway if you prefer)
>

Hi Daniel,

Thank you for the review.
I have finished implementing the changes requested by the maintainers
and would like to resubmit the series.
Do I still have to wait for your feedback to send it again?

Best regards,
Balsam

Re: [PATCH v8 1/6] thermal: mediatek: Relocate driver to mediatek folder

Posted by Daniel Lezcano 3 years, 6 months ago

Hi Balsam,

On 03/08/2022 10:41, Balsam CHIHI wrote:
> On Fri, Jul 29, 2022 at 5:35 PM Daniel Lezcano
> <daniel.lezcano@linaro.org> wrote:
>>
>> Hi Balsam,
>>
>> On 29/07/2022 17:21, Balsam CHIHI wrote:
>>
>> [ ... ]
>>
>> You may want to wait next week before sending a new version, I'm still
>> reviewing your series (note you can send it anyway if you prefer)
>>
> 
> Hi Daniel,
> 
> Thank you for the review.
> I have finished implementing the changes requested by the maintainers
> and would like to resubmit the series.
> Do I still have to wait for your feedback to send it again?

At your convenience, I'll review the new version if you send it



-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v8 1/6] thermal: mediatek: Relocate driver to mediatek folder

Posted by AngeloGioacchino Del Regno 3 years, 6 months ago

Il 26/07/22 15:55, Balsam CHIHI ha scritto:
> Add Mediatek proprietary folder to upstream more thermal zone and cooler
> drivers. Relocate the original thermal controller driver to it and rename
> as soc_temp.c to show its purpose more clearly.
> 
> Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> ---
>   drivers/thermal/Kconfig                       | 14 ++++-------
>   drivers/thermal/Makefile                      |  2 +-
>   drivers/thermal/mediatek/Kconfig              | 23 +++++++++++++++++++
>   drivers/thermal/mediatek/Makefile             |  1 +
>   .../{mtk_thermal.c => mediatek/soc_temp.c}    |  0
>   5 files changed, 29 insertions(+), 11 deletions(-)
>   create mode 100644 drivers/thermal/mediatek/Kconfig
>   create mode 100644 drivers/thermal/mediatek/Makefile
>   rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 0e5cc948373c..ecba8d6e313b 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -412,16 +412,10 @@ config DA9062_THERMAL
>   	  zone.
>   	  Compatible with the DA9062 and DA9061 PMICs.
>   
> -config MTK_THERMAL
> -	tristate "Temperature sensor driver for mediatek SoCs"
> -	depends on ARCH_MEDIATEK || COMPILE_TEST
> -	depends on HAS_IOMEM
> -	depends on NVMEM || NVMEM=n
> -	depends on RESET_CONTROLLER
> -	default y
> -	help
> -	  Enable this option if you want to have support for thermal management
> -	  controller present in Mediatek SoCs
> +menu "Mediatek thermal drivers"
> +depends on ARCH_MEDIATEK || COMPILE_TEST
> +source "drivers/thermal/mediatek/Kconfig"
> +endmenu
>   
>   config AMLOGIC_THERMAL
>   	tristate "Amlogic Thermal Support"
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index def8e1a0399c..3c00e864ad55 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -55,7 +55,7 @@ obj-y				+= st/
>   obj-$(CONFIG_QCOM_TSENS)	+= qcom/
>   obj-y				+= tegra/
>   obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
> -obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
> +obj-$(CONFIG_MTK_THERMAL)	+= mediatek/
>   obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
>   obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
>   obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
> diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
> new file mode 100644
> index 000000000000..9c41e9079fc3
> --- /dev/null
> +++ b/drivers/thermal/mediatek/Kconfig
> @@ -0,0 +1,23 @@
> +config MTK_THERMAL
> +	tristate "MediaTek thermal drivers"
> +	depends on THERMAL_OF
> +	help
> +		This is the option for MediaTek thermal software
> +		solutions. Please enable corresponding options to
> +		get temperature information from thermal sensors or
> +		turn on throttle mechaisms for thermal mitigation.

Sorry, I just noticed that the indentation must be fixed.

	help
	  This is the option .....

Thanks,
Angelo

Re: [PATCH v8 1/6] thermal: mediatek: Relocate driver to mediatek folder

Posted by Balsam CHIHI 3 years, 6 months ago

On Wed, Jul 27, 2022 at 10:24 AM AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com> wrote:
>
> Il 26/07/22 15:55, Balsam CHIHI ha scritto:
> > Add Mediatek proprietary folder to upstream more thermal zone and cooler
> > drivers. Relocate the original thermal controller driver to it and rename
> > as soc_temp.c to show its purpose more clearly.
> >
> > Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> > Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
> > Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> > Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> > ---
> >   drivers/thermal/Kconfig                       | 14 ++++-------
> >   drivers/thermal/Makefile                      |  2 +-
> >   drivers/thermal/mediatek/Kconfig              | 23 +++++++++++++++++++
> >   drivers/thermal/mediatek/Makefile             |  1 +
> >   .../{mtk_thermal.c => mediatek/soc_temp.c}    |  0
> >   5 files changed, 29 insertions(+), 11 deletions(-)
> >   create mode 100644 drivers/thermal/mediatek/Kconfig
> >   create mode 100644 drivers/thermal/mediatek/Makefile
> >   rename drivers/thermal/{mtk_thermal.c => mediatek/soc_temp.c} (100%)
> >
> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > index 0e5cc948373c..ecba8d6e313b 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -412,16 +412,10 @@ config DA9062_THERMAL
> >         zone.
> >         Compatible with the DA9062 and DA9061 PMICs.
> >
> > -config MTK_THERMAL
> > -     tristate "Temperature sensor driver for mediatek SoCs"
> > -     depends on ARCH_MEDIATEK || COMPILE_TEST
> > -     depends on HAS_IOMEM
> > -     depends on NVMEM || NVMEM=n
> > -     depends on RESET_CONTROLLER
> > -     default y
> > -     help
> > -       Enable this option if you want to have support for thermal management
> > -       controller present in Mediatek SoCs
> > +menu "Mediatek thermal drivers"
> > +depends on ARCH_MEDIATEK || COMPILE_TEST
> > +source "drivers/thermal/mediatek/Kconfig"
> > +endmenu
> >
> >   config AMLOGIC_THERMAL
> >       tristate "Amlogic Thermal Support"
> > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> > index def8e1a0399c..3c00e864ad55 100644
> > --- a/drivers/thermal/Makefile
> > +++ b/drivers/thermal/Makefile
> > @@ -55,7 +55,7 @@ obj-y                               += st/
> >   obj-$(CONFIG_QCOM_TSENS)    += qcom/
> >   obj-y                               += tegra/
> >   obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
> > -obj-$(CONFIG_MTK_THERMAL)    += mtk_thermal.o
> > +obj-$(CONFIG_MTK_THERMAL)    += mediatek/
> >   obj-$(CONFIG_GENERIC_ADC_THERMAL)   += thermal-generic-adc.o
> >   obj-$(CONFIG_UNIPHIER_THERMAL)      += uniphier_thermal.o
> >   obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
> > diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
> > new file mode 100644
> > index 000000000000..9c41e9079fc3
> > --- /dev/null
> > +++ b/drivers/thermal/mediatek/Kconfig
> > @@ -0,0 +1,23 @@
> > +config MTK_THERMAL
> > +     tristate "MediaTek thermal drivers"
> > +     depends on THERMAL_OF
> > +     help
> > +             This is the option for MediaTek thermal software
> > +             solutions. Please enable corresponding options to
> > +             get temperature information from thermal sensors or
> > +             turn on throttle mechaisms for thermal mitigation.
>
> Sorry, I just noticed that the indentation must be fixed.
>
>         help
>           This is the option .....
>
> Thanks,
> Angelo
OK, It will be fixed ASAP.

Thanks,
Balsam.

Re: [PATCH v8 1/6] thermal: mediatek: Relocate driver to mediatek folder

Posted by AngeloGioacchino Del Regno 3 years, 6 months ago

Il 26/07/22 15:55, Balsam CHIHI ha scritto:
> Add Mediatek proprietary folder to upstream more thermal zone and cooler
> drivers. Relocate the original thermal controller driver to it and rename
> as soc_temp.c to show its purpose more clearly.
> 
> Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>