1. Patchew
  2. linux
  3. View series

[PATCH] wireless: ath: Fix typo 'the the' in comment

Slark Xiao posted 1 patch 3 years, 8 months ago
There is a newer version of this series
drivers/net/wireless/ath/ath6kl/hif.h       | 2 +-
drivers/net/wireless/ath/ath6kl/sdio.c      | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/wcn36xx/hal.h      | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
[PATCH] wireless: ath: Fix typo 'the the' in comment
Posted by Slark Xiao 3 years, 8 months ago 
Replace 'the the' with 'the' in the comment.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
---
 drivers/net/wireless/ath/ath6kl/hif.h       | 2 +-
 drivers/net/wireless/ath/ath6kl/sdio.c      | 2 +-
 drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
 drivers/net/wireless/ath/wcn36xx/hal.h      | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h
index f9d3f3a5edfe..ba16b98c872d 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.h
+++ b/drivers/net/wireless/ath/ath6kl/hif.h
@@ -92,7 +92,7 @@ struct bus_request {
  *     emode - This indicates the whether the command is to be executed in a
  *             blocking or non-blocking fashion (HIF_SYNCHRONOUS/
  *             HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
- *             implemented using the asynchronous mode allowing the the bus
+ *             implemented using the asynchronous mode allowing the bus
  *             driver to indicate the completion of operation through the
  *             registered callback routine. The requirement primarily comes
  *             from the contexts these operations get called from (a driver's
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 6b51a2dceadc..8a43c48ec1cf 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1185,7 +1185,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
 	 *        Wait for first 4 bytes to be in FIFO
 	 *        If CONSERVATIVE_BMI_READ is enabled, also wait for
 	 *        a BMI command credit, which indicates that the ENTIRE
-	 *        response is available in the the FIFO
+	 *        response is available in the FIFO
 	 *
 	 *  CASE 3: length > 128
 	 *        Wait for the first 4 bytes to be in FIFO
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index dc0e5ea25673..090ff0600c81 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1744,7 +1744,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah,
 	REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA);
 	REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE);
 
-	/* on AR93xx and newer, count = 0 will make the the chip send
+	/* on AR93xx and newer, count = 0 will make the chip send
 	 * spectral samples endlessly. Check if this really was intended,
 	 * and fix otherwise.
 	 */
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index 874746b5993c..a1afe1f85f0e 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -4142,7 +4142,7 @@ struct wcn36xx_hal_dump_cmd_rsp_msg {
 	/* Length of the responce message */
 	u32 rsp_length;
 
-	/* FIXME: Currently considering the the responce will be less than
+	/* FIXME: Currently considering the responce will be less than
 	 * 100bytes */
 	u8 rsp_buffer[DUMPCMD_RSP_BUFFER];
 } __packed;
-- 
2.25.1
Re: [PATCH] wireless: ath: Fix typo 'the the' in comment
Posted by Kalle Valo 3 years, 8 months ago 
Slark Xiao <slark_xiao@163.com> wrote:

> Replace 'the the' with 'the' in the comment.
> 
> Signed-off-by: Slark Xiao <slark_xiao@163.com>

Fails to apply, please rebase on top my ath.git master branch.

error: patch failed: drivers/net/wireless/ath/ath6kl/hif.h:92
error: drivers/net/wireless/ath/ath6kl/hif.h: patch does not apply
error: patch failed: drivers/net/wireless/ath/ath6kl/sdio.c:1185
error: drivers/net/wireless/ath/ath6kl/sdio.c: patch does not apply
error: patch failed: drivers/net/wireless/ath/wcn36xx/hal.h:4142
error: drivers/net/wireless/ath/wcn36xx/hal.h: patch does not apply
stg import: Diff does not apply cleanly

Patch set to Changes Requested.

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20220722082653.74553-1-slark_xiao@163.com/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Re:Re: [PATCH] wireless: ath: Fix typo 'the the' in comment
Posted by Slark Xiao 3 years, 8 months ago 















At 2022-07-25 19:06:50, "Kalle Valo" <kvalo@kernel.org> wrote:
>Slark Xiao <slark_xiao@163.com> wrote:
>
>> Replace 'the the' with 'the' in the comment.
>> 
>> Signed-off-by: Slark Xiao <slark_xiao@163.com>
>
>Fails to apply, please rebase on top my ath.git master branch.
>
>error: patch failed: drivers/net/wireless/ath/ath6kl/hif.h:92
>error: drivers/net/wireless/ath/ath6kl/hif.h: patch does not apply
>error: patch failed: drivers/net/wireless/ath/ath6kl/sdio.c:1185
>error: drivers/net/wireless/ath/ath6kl/sdio.c: patch does not apply
>error: patch failed: drivers/net/wireless/ath/wcn36xx/hal.h:4142
>error: drivers/net/wireless/ath/wcn36xx/hal.h: patch does not apply
>stg import: Diff does not apply cleanly
>
>Patch set to Changes Requested.
>
>-- 
>https://patchwork.kernel.org/project/linux-wireless/patch/20220722082653.74553-1-slark_xiao@163.com/
>
>https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

Bad news, I can't get your ath code completely. 
ubuntu@VM-0-27-ubuntu:~/ath$ !142
git clone git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Cloning into 'ath'...
remote: Enumerating objects: 202, done.
remote: Counting objects: 100% (202/202), done.
remote: Compressing objects: 100% (83/83), done.
Receiving objects: 100% (8897606/8897606), 2.47 GiB | 11.99 MiB/s, done.
remote: Total 8897606 (delta 150), reused 133 (delta 119), pack-reused 8897404
error: index-pack died of signal 984000)
fatal: index-pack failed

ubuntu@VM-0-27-ubuntu:~/ath$ git clone https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Cloning into 'ath'...
remote: Enumerating objects: 202, done.
remote: Counting objects: 100% (202/202), done.
remote: Compressing objects: 100% (83/83), done.
remote: Total 8897606 (delta 150), reused 133 (delta 119), pack-reused 8897404
Receiving objects: 100% (8897606/8897606), 2.47 GiB | 11.88 MiB/s, done.
error: index-pack died of signal 984000)
fatal: index-pack failed

ubuntu@VM-0-27-ubuntu:~/ath$ git clone https://kernel.googlesource.com/pub/scm/linux/kernel/git/kvalo/ath.git
Cloning into 'ath'...
remote: Sending approximately 1.67 GiB ...
remote: Counting objects: 29323, done
remote: Finding sources: 100% (8897606/8897606)
remote: Total 8897606 (delta 7524073), reused 8897044 (delta 7524073)
Receiving objects: 100% (8897606/8897606), 1.67 GiB | 11.98 MiB/s, done.
error: index-pack died of signal 94073)
fatal: index-pack failed

I tried these 3 servers but all failed. Any other ideas?
Re:Re:Re: [PATCH] wireless: ath: Fix typo 'the the' in comment
Posted by Slark Xiao 3 years, 8 months ago 















At 2022-07-26 10:31:31, "Slark Xiao" <slark_xiao@163.com> wrote:
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>At 2022-07-25 19:06:50, "Kalle Valo" <kvalo@kernel.org> wrote:
>>Slark Xiao <slark_xiao@163.com> wrote:
>>
>>> Replace 'the the' with 'the' in the comment.
>>> 
>>> Signed-off-by: Slark Xiao <slark_xiao@163.com>
>>
>>Fails to apply, please rebase on top my ath.git master branch.
>>
>>error: patch failed: drivers/net/wireless/ath/ath6kl/hif.h:92
>>error: drivers/net/wireless/ath/ath6kl/hif.h: patch does not apply
>>error: patch failed: drivers/net/wireless/ath/ath6kl/sdio.c:1185
>>error: drivers/net/wireless/ath/ath6kl/sdio.c: patch does not apply
>>error: patch failed: drivers/net/wireless/ath/wcn36xx/hal.h:4142
>>error: drivers/net/wireless/ath/wcn36xx/hal.h: patch does not apply
>>stg import: Diff does not apply cleanly
>>
>>Patch set to Changes Requested.
>>
>>-- 
>>https://patchwork.kernel.org/project/linux-wireless/patch/20220722082653.74553-1-slark_xiao@163.com/
>>
>>https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
>
>Bad news, I can't get your ath code completely. 
>ubuntu@VM-0-27-ubuntu:~/ath$ !142
>git clone git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
>Cloning into 'ath'...
>remote: Enumerating objects: 202, done.
>remote: Counting objects: 100% (202/202), done.
>remote: Compressing objects: 100% (83/83), done.
>Receiving objects: 100% (8897606/8897606), 2.47 GiB | 11.99 MiB/s, done.
>remote: Total 8897606 (delta 150), reused 133 (delta 119), pack-reused 8897404
>error: index-pack died of signal 984000)
>fatal: index-pack failed
>
>ubuntu@VM-0-27-ubuntu:~/ath$ git clone https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
>Cloning into 'ath'...
>remote: Enumerating objects: 202, done.
>remote: Counting objects: 100% (202/202), done.
>remote: Compressing objects: 100% (83/83), done.
>remote: Total 8897606 (delta 150), reused 133 (delta 119), pack-reused 8897404
>Receiving objects: 100% (8897606/8897606), 2.47 GiB | 11.88 MiB/s, done.
>error: index-pack died of signal 984000)
>fatal: index-pack failed
>
>ubuntu@VM-0-27-ubuntu:~/ath$ git clone https://kernel.googlesource.com/pub/scm/linux/kernel/git/kvalo/ath.git
>Cloning into 'ath'...
>remote: Sending approximately 1.67 GiB ...
>remote: Counting objects: 29323, done
>remote: Finding sources: 100% (8897606/8897606)
>remote: Total 8897606 (delta 7524073), reused 8897044 (delta 7524073)
>Receiving objects: 100% (8897606/8897606), 1.67 GiB | 11.98 MiB/s, done.
>error: index-pack died of signal 94073)
>fatal: index-pack failed
>
>I tried these 3 servers but all failed. Any other ideas?

I fix it by adding virtual memory in my VM. And version v2 has been sent for this changes.
Seems some files has been fixed already. 

Thanks

Patchew 2.1-devel-ea86937

© 2016 - 2026 Red Hat, Inc.