1. Patchew
  2. linux
  3. [PATCH v2 0/4] thermal: mediatek: Add support for MT8365 SoC
  4. View patch

[PATCH v2 3/4] thermal: mediatek: control buffer enablement tweaks

Amjad Ouled-Ameur posted 4 patches 3 years, 6 months ago
There is a newer version of this series
[PATCH v2 3/4] thermal: mediatek: control buffer enablement tweaks
Posted by Amjad Ouled-Ameur 3 years, 6 months ago 
From: Markus Schneider-Pargmann <msp@baylibre.com>

Add logic in order to be able to turn on the control buffer on MT8365.
This change now allows to have control buffer support for MTK_THERMAL_V1,
and it allows to define the register offset, and mask used to enable it.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Tested-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
---
 drivers/thermal/mtk_thermal.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 216eb0d61c5b..1dc276f8c4f1 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -283,6 +283,9 @@ struct mtk_thermal_data {
 	bool need_switch_bank;
 	struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
 	enum mtk_thermal_version version;
+	u32 apmixed_buffer_ctl_reg;
+	u32 apmixed_buffer_ctl_mask;
+	u32 apmixed_buffer_ctl_set;
 };
 
 struct mtk_thermal {
@@ -578,6 +581,9 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
 	.adcpnp = mt7622_adcpnp,
 	.sensor_mux_values = mt7622_mux_values,
 	.version = MTK_THERMAL_V2,
+	.apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
+	.apmixed_buffer_ctl_mask = ~0x37,
+	.apmixed_buffer_ctl_set = 0x1,
 };
 
 /*
@@ -1031,14 +1037,18 @@ static const struct of_device_id mtk_thermal_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
 
-static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
+static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt,
+				       void __iomem *apmixed_base)
 {
 	int tmp;
 
-	tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
-	tmp &= ~(0x37);
-	tmp |= 0x1;
-	writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
+	if (!mt->conf->apmixed_buffer_ctl_reg)
+		return;
+
+	tmp = readl(apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
+	tmp &= mt->conf->apmixed_buffer_ctl_mask;
+	tmp |= mt->conf->apmixed_buffer_ctl_set;
+	writel(tmp, apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
 	udelay(200);
 }
 
@@ -1138,8 +1148,9 @@ static int mtk_thermal_probe(struct platform_device *pdev)
 		goto err_disable_clk_auxadc;
 	}
 
+	mtk_thermal_turn_on_buffer(mt, apmixed_base);
+
 	if (mt->conf->version == MTK_THERMAL_V2) {
-		mtk_thermal_turn_on_buffer(apmixed_base);
 		mtk_thermal_release_periodic_ts(mt, auxadc_base);
 	}
 
-- 
2.37.1
Re: [PATCH v2 3/4] thermal: mediatek: control buffer enablement tweaks
Posted by Matthias Brugger 3 years, 6 months ago 

On 20/07/2022 20:18, Amjad Ouled-Ameur wrote:
> From: Markus Schneider-Pargmann <msp@baylibre.com>
> 
> Add logic in order to be able to turn on the control buffer on MT8365.
> This change now allows to have control buffer support for MTK_THERMAL_V1,
> and it allows to define the register offset, and mask used to enable it.
> 
> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> Reviewed-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
> Tested-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>

Here we will need your Signed-off-by as you are sending the patch :)

Regards,
Matthias

> ---
>   drivers/thermal/mtk_thermal.c | 23 +++++++++++++++++------
>   1 file changed, 17 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index 216eb0d61c5b..1dc276f8c4f1 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -283,6 +283,9 @@ struct mtk_thermal_data {
>   	bool need_switch_bank;
>   	struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
>   	enum mtk_thermal_version version;
> +	u32 apmixed_buffer_ctl_reg;
> +	u32 apmixed_buffer_ctl_mask;
> +	u32 apmixed_buffer_ctl_set;
>   };
>   
>   struct mtk_thermal {
> @@ -578,6 +581,9 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
>   	.adcpnp = mt7622_adcpnp,
>   	.sensor_mux_values = mt7622_mux_values,
>   	.version = MTK_THERMAL_V2,
> +	.apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
> +	.apmixed_buffer_ctl_mask = ~0x37,
> +	.apmixed_buffer_ctl_set = 0x1,
>   };
>   
>   /*
> @@ -1031,14 +1037,18 @@ static const struct of_device_id mtk_thermal_of_match[] = {
>   };
>   MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
>   
> -static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
> +static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt,
> +				       void __iomem *apmixed_base)
>   {
>   	int tmp;
>   
> -	tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
> -	tmp &= ~(0x37);
> -	tmp |= 0x1;
> -	writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
> +	if (!mt->conf->apmixed_buffer_ctl_reg)
> +		return;
> +
> +	tmp = readl(apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
> +	tmp &= mt->conf->apmixed_buffer_ctl_mask;
> +	tmp |= mt->conf->apmixed_buffer_ctl_set;
> +	writel(tmp, apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
>   	udelay(200);
>   }
>   
> @@ -1138,8 +1148,9 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>   		goto err_disable_clk_auxadc;
>   	}
>   
> +	mtk_thermal_turn_on_buffer(mt, apmixed_base);
> +
>   	if (mt->conf->version == MTK_THERMAL_V2) {
> -		mtk_thermal_turn_on_buffer(apmixed_base);
>   		mtk_thermal_release_periodic_ts(mt, auxadc_base);
>   	}
>
Re: [PATCH v2 3/4] thermal: mediatek: control buffer enablement tweaks
Posted by AngeloGioacchino Del Regno 3 years, 6 months ago 
Il 20/07/22 20:18, Amjad Ouled-Ameur ha scritto:
> From: Markus Schneider-Pargmann <msp@baylibre.com>
> 
> Add logic in order to be able to turn on the control buffer on MT8365.
> This change now allows to have control buffer support for MTK_THERMAL_V1,
> and it allows to define the register offset, and mask used to enable it.
> 
> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> Reviewed-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
> Tested-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
> ---
>   drivers/thermal/mtk_thermal.c | 23 +++++++++++++++++------
>   1 file changed, 17 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index 216eb0d61c5b..1dc276f8c4f1 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -283,6 +283,9 @@ struct mtk_thermal_data {
>   	bool need_switch_bank;
>   	struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
>   	enum mtk_thermal_version version;
> +	u32 apmixed_buffer_ctl_reg;
> +	u32 apmixed_buffer_ctl_mask;
> +	u32 apmixed_buffer_ctl_set;
>   };
>   
>   struct mtk_thermal {
> @@ -578,6 +581,9 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
>   	.adcpnp = mt7622_adcpnp,
>   	.sensor_mux_values = mt7622_mux_values,
>   	.version = MTK_THERMAL_V2,
> +	.apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
> +	.apmixed_buffer_ctl_mask = ~0x37,

This is effectively GENMASK(31, 6) | BIT(3) :-)

> +	.apmixed_buffer_ctl_set = 0x1,

...and this is BIT(0)

>   }; >
>   /*
> @@ -1031,14 +1037,18 @@ static const struct of_device_id mtk_thermal_of_match[] = {
>   };
>   MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
>   
> -static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
> +static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt,
> +				       void __iomem *apmixed_base)
>   {
>   	int tmp;

Since you're practically restructuring this function, please fix this wrong
variable type, as this should be a u32.

Regards,
Angelo
Re: [PATCH v2 3/4] thermal: mediatek: control buffer enablement tweaks
Posted by Amjad Ouled-Ameur 3 years, 5 months ago 
Hi Angelo,

On 7/21/22 10:11, AngeloGioacchino Del Regno wrote:
> Il 20/07/22 20:18, Amjad Ouled-Ameur ha scritto:
>> From: Markus Schneider-Pargmann <msp@baylibre.com>
>>
>> Add logic in order to be able to turn on the control buffer on MT8365.
>> This change now allows to have control buffer support for 
>> MTK_THERMAL_V1,
>> and it allows to define the register offset, and mask used to enable it.
>>
>> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
>> Signed-off-by: Fabien Parent <fparent@baylibre.com>
>> Reviewed-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
>> Tested-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
>> ---
>>   drivers/thermal/mtk_thermal.c | 23 +++++++++++++++++------
>>   1 file changed, 17 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/thermal/mtk_thermal.c 
>> b/drivers/thermal/mtk_thermal.c
>> index 216eb0d61c5b..1dc276f8c4f1 100644
>> --- a/drivers/thermal/mtk_thermal.c
>> +++ b/drivers/thermal/mtk_thermal.c
>> @@ -283,6 +283,9 @@ struct mtk_thermal_data {
>>       bool need_switch_bank;
>>       struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
>>       enum mtk_thermal_version version;
>> +    u32 apmixed_buffer_ctl_reg;
>> +    u32 apmixed_buffer_ctl_mask;
>> +    u32 apmixed_buffer_ctl_set;
>>   };
>>     struct mtk_thermal {
>> @@ -578,6 +581,9 @@ static const struct mtk_thermal_data 
>> mt7622_thermal_data = {
>>       .adcpnp = mt7622_adcpnp,
>>       .sensor_mux_values = mt7622_mux_values,
>>       .version = MTK_THERMAL_V2,
>> +    .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
>> +    .apmixed_buffer_ctl_mask = ~0x37,
>
> This is effectively GENMASK(31, 6) | BIT(3) :-)
>
>> +    .apmixed_buffer_ctl_set = 0x1,
>
> ...and this is BIT(0)
>
Thank you for the catch, will update them appropriately.
>>   }; >
>>   /*
>> @@ -1031,14 +1037,18 @@ static const struct of_device_id 
>> mtk_thermal_of_match[] = {
>>   };
>>   MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
>>   -static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
>> +static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt,
>> +                       void __iomem *apmixed_base)
>>   {
>>       int tmp;
>
> Since you're practically restructuring this function, please fix this 
> wrong
> variable type, as this should be a u32.
>
Sure agreed.


Thank you Angelo for the review.

Regards,

Amjad

> Regards,
> Angelo

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.