scsi_report_sense() is possble to print messages exceeding 128 bytes:
[  475.156955] sd 9:0:0:0: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatical

Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
---
 drivers/scsi/scsi_logging.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_logging.c b/drivers/scsi/scsi_logging.c
index b02af340c2d3..edc3fe8c7e0f 100644
--- a/drivers/scsi/scsi_logging.c
+++ b/drivers/scsi/scsi_logging.c
@@ -17,7 +17,7 @@
 
 static char *scsi_log_reserve_buffer(size_t *len)
 {
-	*len = 128;
+	*len = 256;
 	return kmalloc(*len, GFP_ATOMIC);
 }
 
-- 
2.31.1

On Fri, 24 Jun 2022, Li Zhijian wrote:

> scsi_report_sense() is possble to print messages exceeding 128 bytes:
> [  475.156955] sd 9:0:0:0: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatical
> 
> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
> ---
>  drivers/scsi/scsi_logging.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/scsi/scsi_logging.c b/drivers/scsi/scsi_logging.c
> index b02af340c2d3..edc3fe8c7e0f 100644
> --- a/drivers/scsi/scsi_logging.c
> +++ b/drivers/scsi/scsi_logging.c
> @@ -17,7 +17,7 @@
>  
>  static char *scsi_log_reserve_buffer(size_t *len)
>  {
> -	*len = 128;
> +	*len = 256;
>  	return kmalloc(*len, GFP_ATOMIC);
>  }
>  

Perhaps it's better to waste fewer words (both kinds). E.g.

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 49ef864df581..e7283bf23db3 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -463,13 +463,11 @@ static void scsi_report_sense(struct scsi_device *sdev,
 			evt_type = SDEV_EVT_LUN_CHANGE_REPORTED;
 			scsi_report_lun_change(sdev);
 			sdev_printk(KERN_WARNING, sdev,
-				    "Warning! Received an indication that the "
 				    "LUN assignments on this target have "
 				    "changed. The Linux SCSI layer does not "
 				    "automatically remap LUN assignments.\n");
 		} else if (sshdr->asc == 0x3f)
 			sdev_printk(KERN_WARNING, sdev,
-				    "Warning! Received an indication that the "
 				    "operating parameters on this target have "
 				    "changed. The Linux SCSI layer does not "
 				    "automatically adjust these parameters.\n");

Sorry for the late reply. (Strange! this reply didn't arrive to my mailbox)

> On Fri, 24 Jun 2022, Li Zhijian wrote:
>
> > scsi_report_sense() is possble to print messages exceeding 128 bytes: > [ 475.156955] sd 9:0:0:0: Warning! Received an indication that the 
> LUN assignments on this target have changed. The Linux SCSI layer does 
> not automatical > > Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> 
> > --- > drivers/scsi/scsi_logging.c | 2 +- > 1 file changed, 1 
> insertion(+), 1 deletion(-) > > diff --git 
> a/drivers/scsi/scsi_logging.c b/drivers/scsi/scsi_logging.c > index 
> b02af340c2d3..edc3fe8c7e0f 100644 > --- a/drivers/scsi/scsi_logging.c 
> > +++ b/drivers/scsi/scsi_logging.c > @@ -17,7 +17,7 @@ > > static 
> char *scsi_log_reserve_buffer(size_t *len) > { > - *len = 128; > + 
> *len = 256; > return kmalloc(*len, GFP_ATOMIC); > } >
> Perhaps it's better to waste fewer words (both kinds). E.g.
Yes, it's an option. if no objection, i will apply your suggestion in 
24h later. hahaha :)

Thanks
Zhijian


>
> diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c 
> index 49ef864df581..e7283bf23db3 100644 --- 
> a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -463,13 
> +463,11 @@ static void scsi_report_sense(struct scsi_device *sdev,   			evt_type = SDEV_EVT_LUN_CHANGE_REPORTED;
>   			scsi_report_lun_change(sdev);
>   			sdev_printk(KERN_WARNING, sdev,
> - "Warning! Received an indication that the "   				    "LUN assignments on this target have "
>   				    "changed. The Linux SCSI layer does not "
>   				    "automatically remap LUN assignments.\n");
>   		} else if (sshdr->asc == 0x3f)
>   			sdev_printk(KERN_WARNING, sdev,
> - "Warning! Received an indication that the "   				    "operating parameters on this target have "
>   				    "changed. The Linux SCSI layer does not "
>   				    "automatically adjust these parameters.\n");