From: ChiaEn Wu <chiaen_wu@richtek.com>
Add Mediatek MT6370 Charger binding documentation.
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
---
v3
- Add items and remove maxItems of io-channels
- Add io-channel-names and describe each item
- Add "unevaluatedProperties: false" in "usb-otg-vbus-regulator"
- Rename "enable-gpio" to "enable-gpios" in "usb-otg-vbus-regulator"
---
.../power/supply/mediatek,mt6370-charger.yaml | 87 ++++++++++++++++++++++
1 file changed, 87 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
new file mode 100644
index 0000000..f138db6
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6370 Battery Charger
+
+maintainers:
+ - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+ This module is part of the MT6370 MFD device.
+ Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
+
+properties:
+ compatible:
+ const: mediatek,mt6370-charger
+
+ interrupts:
+ description: |
+ Specify what irqs are needed to be handled by MT6370 Charger driver. IRQ
+ "MT6370_IRQ_CHG_MIVR", "MT6370_IRQ_ATTACH" and "MT6370_IRQ_OVPCTRL_UVP_D"
+ are required.
+ items:
+ - description: BC1.2 done irq
+ - description: usb plug in irq
+ - description: mivr irq
+
+ interrupt-names:
+ items:
+ - const: attach_i
+ - const: uvp_d_evt
+ - const: mivr
+
+ io-channels:
+ description: |
+ Use ADC channel to read VBUS, IBUS, IBAT, etc., info.
+ minItems: 1
+ items:
+ - description: |
+ VBUS voltage with lower accuracy (+-75mV) but higher measure
+ range (1~22V)
+ - description: |
+ VBUS voltage with higher accuracy (+-30mV) but lower measure
+ range (1~9.76V)
+ - description: the main system input voltage
+ - description: battery voltage
+ - description: battery temperature-sense input voltage
+ - description: IBUS current (required)
+ - description: battery current
+ - description: |
+ regulated output voltage to supply for the PWM low-side gate driver
+ and the bootstrap capacitor
+ - description: IC junction temperature
+
+ io-channel-names:
+ items:
+ - const: vbusdiv5
+ - const: vbusdiv2
+ - const: vsys
+ - const: vbat
+ - const: ts_bat
+ - const: ibus
+ - const: ibat
+ - const: chg_vddp
+ - const: temp_jc
+
+ usb-otg-vbus-regulator:
+ type: object
+ description: OTG boost regulator.
+ unevaluatedProperties: false
+ $ref: /schemas/regulator/regulator.yaml#
+
+ properties:
+ enable-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+ - io-channels
+
+additionalProperties: false
+
+...
--
2.7.4
Hi ChiaEn, > Add Mediatek MT6370 Charger binding documentation. s/Mediatek/MediaTek/ Would you mind fix that for the series? cheers, Miles > > Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> > --- > > v3 > - Add items and remove maxItems of io-channels > - Add io-channel-names and describe each item > - Add "unevaluatedProperties: false" in "usb-otg-vbus-regulator" > - Rename "enable-gpio" to "enable-gpios" in "usb-otg-vbus-regulator" > --- > .../power/supply/mediatek,mt6370-charger.yaml | 87 ++++++++++++++++++++++ > 1 file changed, 87 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml > > diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml > new file mode 100644 > index 0000000..f138db6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml > @@ -0,0 +1,87 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Mediatek MT6370 Battery Charger > + > +maintainers: > + - ChiaEn Wu <chiaen_wu@richtek.com> > + > +description: | > + This module is part of the MT6370 MFD device. > + Provides Battery Charger, Boost for OTG devices and BC1.2 detection. > + > +properties: > + compatible: > + const: mediatek,mt6370-charger > + > + interrupts: > + description: | > + Specify what irqs are needed to be handled by MT6370 Charger driver. IRQ > + "MT6370_IRQ_CHG_MIVR", "MT6370_IRQ_ATTACH" and "MT6370_IRQ_OVPCTRL_UVP_D" > + are required. > + items: > + - description: BC1.2 done irq > + - description: usb plug in irq > + - description: mivr irq > + > + interrupt-names: > + items: > + - const: attach_i > + - const: uvp_d_evt > + - const: mivr > + > + io-channels: > + description: | > + Use ADC channel to read VBUS, IBUS, IBAT, etc., info. > + minItems: 1 > + items: > + - description: | > + VBUS voltage with lower accuracy (+-75mV) but higher measure > + range (1~22V) > + - description: | > + VBUS voltage with higher accuracy (+-30mV) but lower measure > + range (1~9.76V) > + - description: the main system input voltage > + - description: battery voltage > + - description: battery temperature-sense input voltage > + - description: IBUS current (required) > + - description: battery current > + - description: | > + regulated output voltage to supply for the PWM low-side gate driver > + and the bootstrap capacitor > + - description: IC junction temperature > + > + io-channel-names: > + items: > + - const: vbusdiv5 > + - const: vbusdiv2 > + - const: vsys > + - const: vbat > + - const: ts_bat > + - const: ibus > + - const: ibat > + - const: chg_vddp > + - const: temp_jc > + > + usb-otg-vbus-regulator: > + type: object > + description: OTG boost regulator. > + unevaluatedProperties: false > + $ref: /schemas/regulator/regulator.yaml# > + > + properties: > + enable-gpios: > + maxItems: 1 > + > +required: > + - compatible > + - interrupts > + - interrupt-names > + - io-channels > + > +additionalProperties: false > + > +... > -- > 2.7.4 > >
On 23/06/2022 13:56, ChiaEn Wu wrote: > From: ChiaEn Wu <chiaen_wu@richtek.com> > > Add Mediatek MT6370 Charger binding documentation. > > Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> > --- > > v3 > - Add items and remove maxItems of io-channels > - Add io-channel-names and describe each item > - Add "unevaluatedProperties: false" in "usb-otg-vbus-regulator" > - Rename "enable-gpio" to "enable-gpios" in "usb-otg-vbus-regulator" > --- > .../power/supply/mediatek,mt6370-charger.yaml | 87 ++++++++++++++++++++++ > 1 file changed, 87 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml > > diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml > new file mode 100644 > index 0000000..f138db6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml > @@ -0,0 +1,87 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Mediatek MT6370 Battery Charger > + > +maintainers: > + - ChiaEn Wu <chiaen_wu@richtek.com> > + > +description: | > + This module is part of the MT6370 MFD device. > + Provides Battery Charger, Boost for OTG devices and BC1.2 detection. > + > +properties: > + compatible: > + const: mediatek,mt6370-charger > + > + interrupts: > + description: | > + Specify what irqs are needed to be handled by MT6370 Charger driver. IRQ > + "MT6370_IRQ_CHG_MIVR", "MT6370_IRQ_ATTACH" and "MT6370_IRQ_OVPCTRL_UVP_D" > + are required. > + items: > + - description: BC1.2 done irq > + - description: usb plug in irq > + - description: mivr irq > + > + interrupt-names: > + items: > + - const: attach_i > + - const: uvp_d_evt > + - const: mivr > + > + io-channels: > + description: | > + Use ADC channel to read VBUS, IBUS, IBAT, etc., info. > + minItems: 1 > + items: > + - description: | > + VBUS voltage with lower accuracy (+-75mV) but higher measure > + range (1~22V) > + - description: | > + VBUS voltage with higher accuracy (+-30mV) but lower measure > + range (1~9.76V) > + - description: the main system input voltage > + - description: battery voltage > + - description: battery temperature-sense input voltage > + - description: IBUS current (required) > + - description: battery current > + - description: | > + regulated output voltage to supply for the PWM low-side gate driver > + and the bootstrap capacitor > + - description: IC junction temperature > + > + io-channel-names: It does not match io-channels, you need minItems here as well. > + items: > + - const: vbusdiv5 > + - const: vbusdiv2 > + - const: vsys > + - const: vbat > + - const: ts_bat > + - const: ibus > + - const: ibat > + - const: chg_vddp > + - const: temp_jc > + Best regards, Krzysztof
© 2016 - 2024 Red Hat, Inc.