Add the node for sa3ul crypto accelerator.

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
---
On local testing, crypto self-tests and tcrypt tests were passing
for SHA256, SHA512, ECB-AES and CBC-AES algorithms.
RNG node has not been added due to the indirect access of the
hardware random number generator from OP-TEE.

 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index df3b9883e887..30bd22ff2fc9 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -165,6 +165,19 @@
 		};
 	};
 
+	crypto: crypto@40900000 {
+		compatible = "ti,am62-sa3ul";
+		reg = <0x00 0x40900000 0x00 0x1200>;
+		power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+
+		dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
+				<&main_pktdma 0x7507 0>;
+		dma-names = "tx", "rx1", "rx2";
+	};
+
 	main_pmx0: pinctrl@f4000 {
 		compatible = "pinctrl-single";
 		reg = <0x00 0xf4000 0x00 0x2ac>;
-- 
2.17.1

On 6/23/22 4:59 AM, Jayesh Choudhary wrote:
> Add the node for sa3ul crypto accelerator.
> 
> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
> ---
> On local testing, crypto self-tests and tcrypt tests were passing
> for SHA256, SHA512, ECB-AES and CBC-AES algorithms.
> RNG node has not been added due to the indirect access of the
> hardware random number generator from OP-TEE.
> 
>   arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 13 +++++++++++++
>   1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> index df3b9883e887..30bd22ff2fc9 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> @@ -165,6 +165,19 @@
>   		};
>   	};
>   
> +	crypto: crypto@40900000 {
> +		compatible = "ti,am62-sa3ul";
> +		reg = <0x00 0x40900000 0x00 0x1200>;
> +		power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>;


Change to TI_SCI_PD_SHARED as OP-TEE uses this too, otherwise looks good,

Acked-by: Andrew Davis <afd@ti.com>


> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
> +
> +		dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
> +				<&main_pktdma 0x7507 0>;
> +		dma-names = "tx", "rx1", "rx2";
> +	};
> +
>   	main_pmx0: pinctrl@f4000 {
>   		compatible = "pinctrl-single";
>   		reg = <0x00 0xf4000 0x00 0x2ac>;