From: Guillaume Ranquet <granquet@baylibre.com>

Dp_intf does not support CK/DE polarity because the polarity information
is not used for eDP and DP while dp_intf is only for eDP and DP.
Therefore, we add a bit of flexibility to support SoCs without CK/DE pol
support.

Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
[Bo-Chen: Add modification reason in commit message.]
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 24f4b5618276..fc2ef10bef31 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -126,6 +126,7 @@ struct mtk_dpi_yc_limit {
  * @edge_sel_en: Enable of edge selection.
  * @output_fmts: Array of supported output formats.
  * @num_output_fmts: Quantity of supported output formats.
+ * @is_ck_de_pol: Support CK/DE polarity.
  */
 struct mtk_dpi_conf {
 	unsigned int (*cal_factor)(int clock);
@@ -134,6 +135,7 @@ struct mtk_dpi_conf {
 	bool edge_sel_en;
 	const u32 *output_fmts;
 	u32 num_output_fmts;
+	bool is_ck_de_pol;
 };
 
 static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
@@ -219,13 +221,20 @@ static void mtk_dpi_config_pol(struct mtk_dpi *dpi,
 			       struct mtk_dpi_polarities *dpi_pol)
 {
 	unsigned int pol;
+	unsigned int mask;
 
-	pol = (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ? 0 : CK_POL) |
-	      (dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ? 0 : DE_POL) |
-	      (dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 : HSYNC_POL) |
+	mask = HSYNC_POL | VSYNC_POL;
+	pol = (dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 : HSYNC_POL) |
 	      (dpi_pol->vsync_pol == MTK_DPI_POLARITY_RISING ? 0 : VSYNC_POL);
-	mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol,
-		     CK_POL | DE_POL | HSYNC_POL | VSYNC_POL);
+	if (dpi->conf->is_ck_de_pol) {
+		mask |= CK_POL | DE_POL;
+		pol |= (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ?
+			0 : CK_POL) |
+		       (dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ?
+			0 : DE_POL);
+	}
+
+	mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol, mask);
 }
 
 static void mtk_dpi_config_3d(struct mtk_dpi *dpi, bool en_3d)
@@ -813,6 +822,7 @@ static const struct mtk_dpi_conf mt8173_conf = {
 	.max_clock_khz = 300000,
 	.output_fmts = mt8173_output_fmts,
 	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
+	.is_ck_de_pol = true,
 };
 
 static const struct mtk_dpi_conf mt2701_conf = {
@@ -822,6 +832,7 @@ static const struct mtk_dpi_conf mt2701_conf = {
 	.max_clock_khz = 150000,
 	.output_fmts = mt8173_output_fmts,
 	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
+	.is_ck_de_pol = true,
 };
 
 static const struct mtk_dpi_conf mt8183_conf = {
@@ -830,6 +841,7 @@ static const struct mtk_dpi_conf mt8183_conf = {
 	.max_clock_khz = 100000,
 	.output_fmts = mt8183_output_fmts,
 	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
+	.is_ck_de_pol = true,
 };
 
 static const struct mtk_dpi_conf mt8192_conf = {
@@ -838,6 +850,7 @@ static const struct mtk_dpi_conf mt8192_conf = {
 	.max_clock_khz = 150000,
 	.output_fmts = mt8183_output_fmts,
 	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
+	.is_ck_de_pol = true,
 };
 
 static int mtk_dpi_probe(struct platform_device *pdev)
-- 
2.18.0