MediaTek dpi supports direct connection to pins while dp_intf does not
support. Therefore, add a config "support_direct_pin" to control this.

Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 438bf3bc5e4a..ef7f828a4b1e 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -129,6 +129,8 @@ struct mtk_dpi_yc_limit {
  * @is_ck_de_pol: Support CK/DE polarity.
  * @swap_input_support: Support input swap function.
  * @color_fmt_trans_support: Enable color format transfer.
+ * @support_direct_pin: Dpi can directly connect pins, and enable this config
+ *			to do this.
  * @dimension_mask: Mask used for HWIDTH, HPORCH, VSYNC_WIDTH and VSYNC_PORCH
  *		    (no shift).
  * @hvsize_mask: Mask of HSIZE and VSIZE mask (no shift).
@@ -146,6 +148,7 @@ struct mtk_dpi_conf {
 	bool is_ck_de_pol;
 	bool swap_input_support;
 	bool color_fmt_trans_support;
+	bool support_direct_pin;
 	u32 dimension_mask;
 	u32 hvsize_mask;
 	u32 channel_swap_shift;
@@ -619,11 +622,13 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	mtk_dpi_config_channel_limit(dpi);
 	mtk_dpi_config_bit_num(dpi, dpi->bit_num);
 	mtk_dpi_config_channel_swap(dpi, dpi->channel_swap);
-	mtk_dpi_config_yc_map(dpi, dpi->yc_map);
 	mtk_dpi_config_color_format(dpi, dpi->color_format);
-	mtk_dpi_config_2n_h_fre(dpi);
-	mtk_dpi_dual_edge(dpi);
-	mtk_dpi_config_disable_edge(dpi);
+	if (dpi->conf->support_direct_pin) {
+		mtk_dpi_config_yc_map(dpi, dpi->yc_map);
+		mtk_dpi_config_2n_h_fre(dpi);
+		mtk_dpi_dual_edge(dpi);
+		mtk_dpi_config_disable_edge(dpi);
+	}
 	mtk_dpi_sw_reset(dpi, false);
 
 	return 0;
@@ -881,6 +886,7 @@ static const struct mtk_dpi_conf mt8173_conf = {
 	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
 	.is_ck_de_pol = true,
 	.swap_input_support = true,
+	.support_direct_pin = true,
 	.dimension_mask = HPW_MASK,
 	.hvsize_mask = HSIZE_MASK,
 	.channel_swap_shift = CH_SWAP,
@@ -897,6 +903,7 @@ static const struct mtk_dpi_conf mt2701_conf = {
 	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
 	.is_ck_de_pol = true,
 	.swap_input_support = true,
+	.support_direct_pin = true,
 	.dimension_mask = HPW_MASK,
 	.hvsize_mask = HSIZE_MASK,
 	.channel_swap_shift = CH_SWAP,
@@ -912,6 +919,7 @@ static const struct mtk_dpi_conf mt8183_conf = {
 	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
 	.is_ck_de_pol = true,
 	.swap_input_support = true,
+	.support_direct_pin = true,
 	.dimension_mask = HPW_MASK,
 	.hvsize_mask = HSIZE_MASK,
 	.channel_swap_shift = CH_SWAP,
@@ -927,6 +935,7 @@ static const struct mtk_dpi_conf mt8192_conf = {
 	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
 	.is_ck_de_pol = true,
 	.swap_input_support = true,
+	.support_direct_pin = true,
 	.dimension_mask = HPW_MASK,
 	.hvsize_mask = HSIZE_MASK,
 	.channel_swap_shift = CH_SWAP,
-- 
2.18.0

Il 21/06/22 13:37, Bo-Chen Chen ha scritto:
> MediaTek dpi supports direct connection to pins while dp_intf does not
> support. Therefore, add a config "support_direct_pin" to control this.
> 
> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> ---
>   drivers/gpu/drm/mediatek/mtk_dpi.c | 17 +++++++++++++----
>   1 file changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 438bf3bc5e4a..ef7f828a4b1e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -129,6 +129,8 @@ struct mtk_dpi_yc_limit {
>    * @is_ck_de_pol: Support CK/DE polarity.
>    * @swap_input_support: Support input swap function.
>    * @color_fmt_trans_support: Enable color format transfer.
> + * @support_direct_pin: Dpi can directly connect pins, and enable this config
> + *			to do this.

@support_direct_pin: IP supports direct connection to pins

or

@support_direct_pin: IP has direct connection to DP pins

or

@support_direct_pin: IP connects directly to DP pins

pick one, after which:

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

On Tue, 2022-06-21 at 14:11 +0200, AngeloGioacchino Del Regno wrote:
> Il 21/06/22 13:37, Bo-Chen Chen ha scritto:
> > MediaTek dpi supports direct connection to pins while dp_intf does
> > not
> > support. Therefore, add a config "support_direct_pin" to control
> > this.
> > 
> > Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> > ---
> >   drivers/gpu/drm/mediatek/mtk_dpi.c | 17 +++++++++++++----
> >   1 file changed, 13 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > index 438bf3bc5e4a..ef7f828a4b1e 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > @@ -129,6 +129,8 @@ struct mtk_dpi_yc_limit {
> >    * @is_ck_de_pol: Support CK/DE polarity.
> >    * @swap_input_support: Support input swap function.
> >    * @color_fmt_trans_support: Enable color format transfer.
> > + * @support_direct_pin: Dpi can directly connect pins, and enable
> > this config
> > + *			to do this.
> 
> @support_direct_pin: IP supports direct connection to pins
> 
> or
> 
> @support_direct_pin: IP has direct connection to DP pins
> 
> or
> 
> @support_direct_pin: IP connects directly to DP pins
> 
> pick one, after which:
> 
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@collabora.com>
> 
> 

Hello Angelo,

this is not connect to "DP" pin. This setting is for dpi to connect to
panel directly and there is no such usecase for dp_intf.

Therefore, I will use "@support_direct_pin: IP supports direct
connection to pins".

Thanks

BRs,
Bo-Chen

On Wed, 2022-06-22 at 17:08 +0800, Rex-BC Chen wrote:
> On Tue, 2022-06-21 at 14:11 +0200, AngeloGioacchino Del Regno wrote:
> > Il 21/06/22 13:37, Bo-Chen Chen ha scritto:
> > > MediaTek dpi supports direct connection to pins while dp_intf
> > > does
> > > not
> > > support. Therefore, add a config "support_direct_pin" to control
> > > this.
> > > 
> > > Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> > > ---
> > >   drivers/gpu/drm/mediatek/mtk_dpi.c | 17 +++++++++++++----
> > >   1 file changed, 13 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > index 438bf3bc5e4a..ef7f828a4b1e 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > > @@ -129,6 +129,8 @@ struct mtk_dpi_yc_limit {
> > >    * @is_ck_de_pol: Support CK/DE polarity.
> > >    * @swap_input_support: Support input swap function.
> > >    * @color_fmt_trans_support: Enable color format transfer.
> > > + * @support_direct_pin: Dpi can directly connect pins, and
> > > enable
> > > this config
> > > + *			to do this.
> > 
> > @support_direct_pin: IP supports direct connection to pins
> > 
> > or
> > 
> > @support_direct_pin: IP has direct connection to DP pins
> > 
> > or
> > 
> > @support_direct_pin: IP connects directly to DP pins
> > 
> > pick one, after which:
> > 
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@collabora.com>
> > 
> > 
> 
> Hello Angelo,
> 
> this is not connect to "DP" pin. This setting is for dpi to connect
> to
> panel directly and there is no such usecase for dp_intf.
> 
> Therefore, I will use "@support_direct_pin: IP supports direct
> connection to pins".
> 
> Thanks
> 
> BRs,
> Bo-Chen
> 

Hello Angelo,

I think "@support_direct_pin: IP supports direct connection to dpi
panels" is more precise for this config. I will use this description.

BRs,
Bo-Chen