This series adds the device tree for Xiaomi Mi 5s Plus (xiaomi-natrium)
smartphone which is based on Snapdragon 821 SoC.

Changes since v3:
- Remove the unnecessary properties in the device tree.
- Correct the supplies in "dsi0" node
- Add delay properties in "touchscreen" node

Changes since v2:
- Rename the node "synaptics" to "touchscreen".

Changes since v1:
- Adjust the sequence of the patches in this series.
- Remove the unnecessary line and properties in the device tree.
- Rename the nodes contain underscores.

Alec Su (2):
  dt-bindings: arm: qcom: Document xiaomi,natrium board
  arm64: dts: qcom: msm8996-xiaomi-natrium: Add support for Xiaomi Mi 5s
    Plus

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/msm8996-xiaomi-natrium.dts  | 414 ++++++++++++++++++
 3 files changed, 416 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts

-- 
2.35.3

On Mon, 6 Jun 2022 02:47:04 +0000, Alec Su wrote:
> This series adds the device tree for Xiaomi Mi 5s Plus (xiaomi-natrium)
> smartphone which is based on Snapdragon 821 SoC.
> 
> Changes since v3:
> - Remove the unnecessary properties in the device tree.
> - Correct the supplies in "dsi0" node
> - Add delay properties in "touchscreen" node
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: arm: qcom: Document xiaomi,natrium board
      commit: bb856fdf07f666686439b2c186fbb80a41e93277
[2/2] arm64: dts: qcom: msm8996-xiaomi-natrium: Add support for Xiaomi Mi 5s Plus
      commit: 13e75fe786a16c35bccc5e9d8890224fd38ad733

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>