Add support for R-Car S4. The S4 IP differs a bit from its siblings in
such way that it has 3 out of 4 TSC nodes for Linux and the interrupts
are not routed to the INTC-AP but to the ECM.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 .../devicetree/bindings/thermal/rcar-gen3-thermal.yaml    | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
index 1368d90da0e8..b863c0a935ec 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
@@ -8,9 +8,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Renesas R-Car Gen3 Thermal Sensor
 
 description:
-  On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
-  sensors (THS) which are the analog circuits for measuring temperature (Tj)
-  inside the LSI.
+
+  On most R-Car Gen3 and later SoCs, the thermal sensor controllers (TSC)
+  control the thermal sensors (THS) which are the analog circuits for
+  measuring temperature (Tj) inside the LSI.
 
 maintainers:
   - Niklas Söderlund <niklas.soderlund@ragnatech.se>
@@ -27,6 +28,7 @@ properties:
       - renesas,r8a77965-thermal # R-Car M3-N
       - renesas,r8a77980-thermal # R-Car V3H
       - renesas,r8a779a0-thermal # R-Car V3U
+      - renesas,r8a779f0-thermal # R-Car S4
 
   reg: true
 
-- 
2.35.1

Hi Wolfram,

On Wed, May 25, 2022 at 5:42 PM Wolfram Sang
<wsa+renesas@sang-engineering.com> wrote:
> Add support for R-Car S4. The S4 IP differs a bit from its siblings in
> such way that it has 3 out of 4 TSC nodes for Linux and the interrupts
> are not routed to the INTC-AP but to the ECM.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Thanks for your patch!

> --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
> +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
> @@ -8,9 +8,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
>  title: Renesas R-Car Gen3 Thermal Sensor
>
>  description:
> -  On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
> -  sensors (THS) which are the analog circuits for measuring temperature (Tj)
> -  inside the LSI.
> +
> +  On most R-Car Gen3 and later SoCs, the thermal sensor controllers (TSC)
> +  control the thermal sensors (THS) which are the analog circuits for
> +  measuring temperature (Tj) inside the LSI.
>
>  maintainers:
>    - Niklas Söderlund <niklas.soderlund@ragnatech.se>
> @@ -27,6 +28,7 @@ properties:
>        - renesas,r8a77965-thermal # R-Car M3-N
>        - renesas,r8a77980-thermal # R-Car V3H
>        - renesas,r8a779a0-thermal # R-Car V3U
> +      - renesas,r8a779f0-thermal # R-Car S4
>
>    reg: true

As the interrupt is routed to the ECM, like on R-Car V3U, the interrupts
property should not be required.  Else "make dtbs_check" complains:

    arch/arm64/boot/dts/renesas/r8a779f0-spider.dtb: thermal@e6198000:
'interrupts' is a required property

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

On Wed, 25 May 2022 17:10:40 +0200, Wolfram Sang wrote:
> Add support for R-Car S4. The S4 IP differs a bit from its siblings in
> such way that it has 3 out of 4 TSC nodes for Linux and the interrupts
> are not routed to the INTC-AP but to the ECM.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
>  .../devicetree/bindings/thermal/rcar-gen3-thermal.yaml    | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

Hi Wolfram,

Thanks for your work.

On 2022-05-25 17:10:40 +0200, Wolfram Sang wrote:
> Add support for R-Car S4. The S4 IP differs a bit from its siblings in
> such way that it has 3 out of 4 TSC nodes for Linux and the interrupts
> are not routed to the INTC-AP but to the ECM.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>

> ---
>  .../devicetree/bindings/thermal/rcar-gen3-thermal.yaml    | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
> index 1368d90da0e8..b863c0a935ec 100644
> --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
> +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
> @@ -8,9 +8,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
>  title: Renesas R-Car Gen3 Thermal Sensor
>  
>  description:
> -  On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
> -  sensors (THS) which are the analog circuits for measuring temperature (Tj)
> -  inside the LSI.
> +
> +  On most R-Car Gen3 and later SoCs, the thermal sensor controllers (TSC)
> +  control the thermal sensors (THS) which are the analog circuits for
> +  measuring temperature (Tj) inside the LSI.
>  
>  maintainers:
>    - Niklas Söderlund <niklas.soderlund@ragnatech.se>
> @@ -27,6 +28,7 @@ properties:
>        - renesas,r8a77965-thermal # R-Car M3-N
>        - renesas,r8a77980-thermal # R-Car V3H
>        - renesas,r8a779a0-thermal # R-Car V3U
> +      - renesas,r8a779f0-thermal # R-Car S4
>  
>    reg: true
>  
> -- 
> 2.35.1
> 

-- 
Kind Regards,
Niklas Söderlund