MT8186 is a SoC based on 64bit ARMv8 architecture.
It contains 6 CA55 and 2 CA76 cores.
MT8186 share many HW IP with MT65xx series.

This patchset was tested on MT8186 evaluation board to shell.

Based on next-20220519, linux-next/master

changes since v9:
 - remove some merged PATCHs from series
 - reorder nodes in dts (cpu-map)
 - remove okay status in auxadc
 - remove unnecessary suffix node name for i2c
 - add pwm node 
 - add dsi-phy node 
 - add dpi node 

changes since v9:
 - add one space before equal sign of drive-strength-adv
 - corect compatible name for big cores (ca76)
 - use upper case of address in pinctrl
 - add pwrap node
 - add pwm node

changes since v8:
 - change name from pins_bus to pins-sda-scl
 - correct email address
 - add capacity-dmips-mhz for each CPU
 - add ppi-partitions in gic node
 - change name to power-domain
 - remove status "okay" in scp node
 - update timer and pericfg compatible in series

changes since v7:
 - add scp&auxadc node

changes since v6:
 - remove unnecessary blank line

changes since v5:
 - replace Mediatek a to MediaTek
 - use GPL-2.0-only OR BSD-2-Clause

changes since v4:
 - correct driver clock of mt8186
 - add power domains controller and clock controllers
 - add pinctrl, usb host, spi and i2c nodes
 - add node status in mt8186-evb.dts
 - correct some dtbs_check warnings

changes since v3:
 - remove serial, mmc and phy patch from series. (already merged)
 - remove mcusysoff node
 - move oscillator nodes at the head of dts
 - change name from usb-phy to t-phy

changes since v2:
 - add soc {} in mt8186.dtsi

changes since v1:
 - add dt-bindings: arm: Add compatible for MediaTek MT8186

Allen-KH Cheng (3):
  dt-bindings: arm: mediatek: Add mt8186 pericfg compatible
  dt-bindings: arm: Add compatible for MediaTek MT8186
  arm64: dts: Add MediaTek SoC MT8186 dts and evaluation board and
    Makefile

 .../devicetree/bindings/arm/mediatek.yaml     |    4 +
 .../arm/mediatek/mediatek,pericfg.yaml        |    1 +
 arch/arm64/boot/dts/mediatek/Makefile         |    1 +
 arch/arm64/boot/dts/mediatek/mt8186-evb.dts   |  232 ++++
 arch/arm64/boot/dts/mediatek/mt8186.dtsi      | 1016 +++++++++++++++++
 5 files changed, 1254 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8186.dtsi

-- 
2.18.0

On 20/05/2022 14:22, Allen-KH Cheng wrote:
> MT8186 is a SoC based on 64bit ARMv8 architecture.
> It contains 6 CA55 and 2 CA76 cores.
> MT8186 share many HW IP with MT65xx series.
> 
> This patchset was tested on MT8186 evaluation board to shell.
> 

Applied, thanks!

> Based on next-20220519, linux-next/master
> 
> changes since v9:
>   - remove some merged PATCHs from series
>   - reorder nodes in dts (cpu-map)
>   - remove okay status in auxadc
>   - remove unnecessary suffix node name for i2c
>   - add pwm node
>   - add dsi-phy node
>   - add dpi node
> 
> changes since v9:
>   - add one space before equal sign of drive-strength-adv
>   - corect compatible name for big cores (ca76)
>   - use upper case of address in pinctrl
>   - add pwrap node
>   - add pwm node
> 
> changes since v8:
>   - change name from pins_bus to pins-sda-scl
>   - correct email address
>   - add capacity-dmips-mhz for each CPU
>   - add ppi-partitions in gic node
>   - change name to power-domain
>   - remove status "okay" in scp node
>   - update timer and pericfg compatible in series
> 
> changes since v7:
>   - add scp&auxadc node
> 
> changes since v6:
>   - remove unnecessary blank line
> 
> changes since v5:
>   - replace Mediatek a to MediaTek
>   - use GPL-2.0-only OR BSD-2-Clause
> 
> changes since v4:
>   - correct driver clock of mt8186
>   - add power domains controller and clock controllers
>   - add pinctrl, usb host, spi and i2c nodes
>   - add node status in mt8186-evb.dts
>   - correct some dtbs_check warnings
> 
> changes since v3:
>   - remove serial, mmc and phy patch from series. (already merged)
>   - remove mcusysoff node
>   - move oscillator nodes at the head of dts
>   - change name from usb-phy to t-phy
> 
> changes since v2:
>   - add soc {} in mt8186.dtsi
> 
> changes since v1:
>   - add dt-bindings: arm: Add compatible for MediaTek MT8186
> 
> Allen-KH Cheng (3):
>    dt-bindings: arm: mediatek: Add mt8186 pericfg compatible
>    dt-bindings: arm: Add compatible for MediaTek MT8186
>    arm64: dts: Add MediaTek SoC MT8186 dts and evaluation board and
>      Makefile
> 
>   .../devicetree/bindings/arm/mediatek.yaml     |    4 +
>   .../arm/mediatek/mediatek,pericfg.yaml        |    1 +
>   arch/arm64/boot/dts/mediatek/Makefile         |    1 +
>   arch/arm64/boot/dts/mediatek/mt8186-evb.dts   |  232 ++++
>   arch/arm64/boot/dts/mediatek/mt8186.dtsi      | 1016 +++++++++++++++++
>   5 files changed, 1254 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-evb.dts
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8186.dtsi
>

On 22/06/2022 17:40, Matthias Brugger wrote:
> 
> 
> On 20/05/2022 14:22, Allen-KH Cheng wrote:
>> MT8186 is a SoC based on 64bit ARMv8 architecture.
>> It contains 6 CA55 and 2 CA76 cores.
>> MT8186 share many HW IP with MT65xx series.
>>
>> This patchset was tested on MT8186 evaluation board to shell.
>>
> 
> Applied, thanks!
> 

Based on the review from Angelo I dropped patch 3 from the tree. Please address 
the issues and submit again.

Regards,
Matthias

>> Based on next-20220519, linux-next/master
>>
>> changes since v9:
>>   - remove some merged PATCHs from series
>>   - reorder nodes in dts (cpu-map)
>>   - remove okay status in auxadc
>>   - remove unnecessary suffix node name for i2c
>>   - add pwm node
>>   - add dsi-phy node
>>   - add dpi node
>>
>> changes since v9:
>>   - add one space before equal sign of drive-strength-adv
>>   - corect compatible name for big cores (ca76)
>>   - use upper case of address in pinctrl
>>   - add pwrap node
>>   - add pwm node
>>
>> changes since v8:
>>   - change name from pins_bus to pins-sda-scl
>>   - correct email address
>>   - add capacity-dmips-mhz for each CPU
>>   - add ppi-partitions in gic node
>>   - change name to power-domain
>>   - remove status "okay" in scp node
>>   - update timer and pericfg compatible in series
>>
>> changes since v7:
>>   - add scp&auxadc node
>>
>> changes since v6:
>>   - remove unnecessary blank line
>>
>> changes since v5:
>>   - replace Mediatek a to MediaTek
>>   - use GPL-2.0-only OR BSD-2-Clause
>>
>> changes since v4:
>>   - correct driver clock of mt8186
>>   - add power domains controller and clock controllers
>>   - add pinctrl, usb host, spi and i2c nodes
>>   - add node status in mt8186-evb.dts
>>   - correct some dtbs_check warnings
>>
>> changes since v3:
>>   - remove serial, mmc and phy patch from series. (already merged)
>>   - remove mcusysoff node
>>   - move oscillator nodes at the head of dts
>>   - change name from usb-phy to t-phy
>>
>> changes since v2:
>>   - add soc {} in mt8186.dtsi
>>
>> changes since v1:
>>   - add dt-bindings: arm: Add compatible for MediaTek MT8186
>>
>> Allen-KH Cheng (3):
>>    dt-bindings: arm: mediatek: Add mt8186 pericfg compatible
>>    dt-bindings: arm: Add compatible for MediaTek MT8186
>>    arm64: dts: Add MediaTek SoC MT8186 dts and evaluation board and
>>      Makefile
>>
>>   .../devicetree/bindings/arm/mediatek.yaml     |    4 +
>>   .../arm/mediatek/mediatek,pericfg.yaml        |    1 +
>>   arch/arm64/boot/dts/mediatek/Makefile         |    1 +
>>   arch/arm64/boot/dts/mediatek/mt8186-evb.dts   |  232 ++++
>>   arch/arm64/boot/dts/mediatek/mt8186.dtsi      | 1016 +++++++++++++++++
>>   5 files changed, 1254 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-evb.dts
>>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8186.dtsi
>>