The Wolfson Microelectronics Arizona audio can be connected via SPI bus
(e.g. WM5110 on Exynos5433 TM2 board), so allow spi-max-frequency
property.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/mfd/wlf,arizona.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
index 9e762d474218..0d1835c657a2 100644
--- a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
@@ -193,6 +193,8 @@ properties:
   reset-gpios:
     maxItems: 1
 
+  spi-max-frequency: true
+
   wlf,reset:
     description:
       GPIO specifier for the GPIO controlling RESET
-- 
2.32.0

On Wed, Apr 27, 2022 at 08:51:02AM +0200, Krzysztof Kozlowski wrote:
> The Wolfson Microelectronics Arizona audio can be connected via SPI bus
> (e.g. WM5110 on Exynos5433 TM2 board), so allow spi-max-frequency
> property.
> 
> Reported-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---

Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>

Thanks,
Charles

On Wed, Apr 27, 2022 at 12:21:43PM +0000, Charles Keepax wrote:
> On Wed, Apr 27, 2022 at 08:51:02AM +0200, Krzysztof Kozlowski wrote:
> > The Wolfson Microelectronics Arizona audio can be connected via SPI bus
> > (e.g. WM5110 on Exynos5433 TM2 board), so allow spi-max-frequency
> > property.
> > 
> > Reported-by: Rob Herring <robh@kernel.org>
> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > ---
> 
> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> 

Apologies but looking at this again I can't quite see why this is
necessary. The Arizona schema should allow properties that arn't
specified. Do you have an example of what failed to warrant this?

Thanks,
Charles

On 27/04/2022 14:58, Charles Keepax wrote:
> On Wed, Apr 27, 2022 at 12:21:43PM +0000, Charles Keepax wrote:
>> On Wed, Apr 27, 2022 at 08:51:02AM +0200, Krzysztof Kozlowski wrote:
>>> The Wolfson Microelectronics Arizona audio can be connected via SPI bus
>>> (e.g. WM5110 on Exynos5433 TM2 board), so allow spi-max-frequency
>>> property.
>>>
>>> Reported-by: Rob Herring <robh@kernel.org>
>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>> ---
>>
>> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
>>
> 
> Apologies but looking at this again I can't quite see why this is
> necessary. The Arizona schema should allow properties that arn't
> specified. Do you have an example of what failed to warrant this?

The Arizona schema has unevaluatedProperties: false, which means unknown
properties will not be accepted. Neither Arizona schema nor other
referenced schemas define spi-max-frequency, so when the schema is run,
the property will be unevaluated, thus cause a warning.

This is visible here at the bottom (with Rob's work-in-progress):
https://lore.kernel.org/linux-devicetree/345716e9-5624-5ba0-09f0-46e9850c546c@linaro.org/T/#m4b5d7cfdf34dbd410003b2faae4d840113050c51

Although I think that I did not fix it properly, because I missed
'controller-data', so instead this should be fixed with referencing
spi-peripheral-props like here:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.17.y&id=f412fe11c1a9d815565f3918c56f3fd02167c734



Best regards,
Krzysztof

On Wed, Apr 27, 2022 at 03:49:51PM +0200, Krzysztof Kozlowski wrote:
> On 27/04/2022 14:58, Charles Keepax wrote:
> > On Wed, Apr 27, 2022 at 12:21:43PM +0000, Charles Keepax wrote:
> >> On Wed, Apr 27, 2022 at 08:51:02AM +0200, Krzysztof Kozlowski wrote:
> The Arizona schema has unevaluatedProperties: false, which means unknown
> properties will not be accepted. Neither Arizona schema nor other
> referenced schemas define spi-max-frequency, so when the schema is run,
> the property will be unevaluated, thus cause a warning.
> 
> This is visible here at the bottom (with Rob's work-in-progress):
> https://lore.kernel.org/linux-devicetree/345716e9-5624-5ba0-09f0-46e9850c546c@linaro.org/T/#m4b5d7cfdf34dbd410003b2faae4d840113050c51
> 
> Although I think that I did not fix it properly, because I missed
> 'controller-data', so instead this should be fixed with referencing
> spi-peripheral-props like here:
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.17.y&id=f412fe11c1a9d815565f3918c56f3fd02167c734
> 

Ah yes I forgot the unevaluatedProperties didn't work properly,
sorry was running things on my DTs here with SPI and they were
all passing but of course I don't have Rob's fix to make the
unevaluatedProperties actually work.

Probably yeah include the spi properties yaml is a better
solution as that covers all the properties that might get used.

Thanks,
Charles