This series adds support for the Marvell 98DX2530 SoC which is the Control and
Management CPU integrated into the AlleyCat5/AlleyCat5X series of Marvell
switches.
The CPU core is an ARM Cortex-A55 with neon, simd and crypto extensions.
This is fairly similar to the Armada-3700 SoC so most of the required
peripherals are already supported. This series adds a devicetree and pinctrl
driver for the SoC and the RD-AC5X-32G16HVG6HLG reference board.
In the v3 series I've dropped out a few patches. The MMC stuff is more
complicated than just adding a compatible string. The mvneta changes have gone
in via net-next.
Chris Packham (4):
dt-bindings: pinctrl: mvebu: Document bindings for AC5
pinctrl: mvebu: pinctrl driver for 98DX2530 SoC
arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board
arm64: marvell: enable the 98DX2530 pinctrl driver
.../bindings/pinctrl/marvell,ac5-pinctrl.yaml | 72 +++++
arch/arm64/Kconfig.platforms | 2 +
arch/arm64/boot/dts/marvell/Makefile | 1 +
.../boot/dts/marvell/armada-98dx2530.dtsi | 302 ++++++++++++++++++
arch/arm64/boot/dts/marvell/rd-ac5x.dts | 82 +++++
drivers/pinctrl/mvebu/Kconfig | 4 +
drivers/pinctrl/mvebu/Makefile | 1 +
drivers/pinctrl/mvebu/pinctrl-ac5.c | 261 +++++++++++++++
8 files changed, 725 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
create mode 100644 arch/arm64/boot/dts/marvell/armada-98dx2530.dtsi
create mode 100644 arch/arm64/boot/dts/marvell/rd-ac5x.dts
create mode 100644 drivers/pinctrl/mvebu/pinctrl-ac5.c
--
2.35.1