From: Minghao Chi <chi.minghao@zte.com.cn>

Using pm_runtime_resume_and_get is more appropriate
for simplifing code

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
---
 drivers/net/ethernet/ti/am65-cpsw-nuss.c | 33 ++++++++----------------
 1 file changed, 11 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index d2747e9db286..b7ebd741f284 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -173,11 +173,9 @@ static int am65_cpsw_nuss_ndo_slave_add_vid(struct net_device *ndev,
 	if (!netif_running(ndev) || !vid)
 		return 0;
 
-	ret = pm_runtime_get_sync(common->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(common->dev);
+	ret = pm_runtime_resume_and_get(common->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	port_mask = BIT(port->port_id) | ALE_PORT_HOST;
 	if (!vid)
@@ -203,11 +201,9 @@ static int am65_cpsw_nuss_ndo_slave_kill_vid(struct net_device *ndev,
 	if (!netif_running(ndev) || !vid)
 		return 0;
 
-	ret = pm_runtime_get_sync(common->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(common->dev);
+	ret = pm_runtime_resume_and_get(common->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	dev_info(common->dev, "Removing vlan %d from vlan filter\n", vid);
 	ret = cpsw_ale_del_vlan(common->ale, vid,
@@ -557,11 +553,9 @@ static int am65_cpsw_nuss_ndo_slave_open(struct net_device *ndev)
 	struct am65_cpsw_port *port = am65_ndev_to_port(ndev);
 	int ret, i;
 
-	ret = pm_runtime_get_sync(common->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(common->dev);
+	ret = pm_runtime_resume_and_get(common->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	/* Notify the stack of the actual queue counts. */
 	ret = netif_set_real_num_tx_queues(ndev, common->tx_ch_num);
@@ -1214,11 +1208,9 @@ static int am65_cpsw_nuss_ndo_slave_set_mac_address(struct net_device *ndev,
 	if (ret < 0)
 		return ret;
 
-	ret = pm_runtime_get_sync(common->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(common->dev);
+	ret = pm_runtime_resume_and_get(common->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	cpsw_ale_del_ucast(common->ale, ndev->dev_addr,
 			   HOST_PORT_NUM, 0, 0);
@@ -2692,9 +2684,8 @@ static int am65_cpsw_nuss_probe(struct platform_device *pdev)
 	common->bus_freq = clk_get_rate(clk);
 
 	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(dev);
 		pm_runtime_disable(dev);
 		return ret;
 	}
@@ -2789,11 +2780,9 @@ static int am65_cpsw_nuss_remove(struct platform_device *pdev)
 
 	common = dev_get_drvdata(dev);
 
-	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(&pdev->dev);
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	am65_cpsw_nuss_phylink_cleanup(common);
 	am65_cpsw_unregister_devlink(common);
-- 
2.25.1

Hello:

This patch was applied to netdev/net-next.git (master)
by David S. Miller <davem@davemloft.net>:

On Tue, 12 Apr 2022 09:05:15 +0000 you wrote:
> From: Minghao Chi <chi.minghao@zte.com.cn>
> 
> Using pm_runtime_resume_and_get is more appropriate
> for simplifing code
> 
> Reported-by: Zeal Robot <zealci@zte.com.cn>
> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
> 
> [...]

Here is the summary with links:
  - net: ethernet: ti: am65-cpsw-nuss: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
    https://git.kernel.org/netdev/net-next/c/2240514cb644

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html