From: Marcel Ziswiler <marcel.ziswiler@toradex.com>


Add DMA properties to uart2 node of the base i.MX 8M Plus device tree,
add toradex,verdin-imx8mp et al. to dt-bindings and finally, add
initial support for Verdin iMX8M Plus.

Changes in v3:
- Add missing audio codec todo on development board as well.
- Actually define scl/sda-gpios for Verdin I2C_2_DSI aka i2c2. Also
  pointed out by Laurent. Thanks!
- Update PMIC LDO4 and I2C level shifter enablement comment.
- Fix USDHC2_VSELECT sleep pinctrl value and add a comment.
- Add comment about lowering frequency on Verdin I2C_2_DSI as suggested
  by Laurent.
- Re-based on top of Shawn's latest for-next based on 5.18-rc1.

Changes in v2:
- Add Laurent's reviewed-by tag.
- Add Krzysztof's reviewed-by tag.
- Fix capitalisation of verdin in comments as reported by Laurent.
- Add/modify todo comments as suggested by Laurent.
- Add Laurent's reviewed- and tested-by tags.

Marcel Ziswiler (3):
  arm64: dts: imx8mp: add uart2 dma
  dt-bindings: arm: fsl: add toradex,verdin-imx8mp et al.
  arm64: dts: freescale: add initial support for verdin imx8m plus

 .../devicetree/bindings/arm/fsl.yaml          |   21 +
 arch/arm64/boot/dts/freescale/Makefile        |    4 +
 .../dts/freescale/imx8mp-verdin-dahlia.dtsi   |  129 ++
 .../boot/dts/freescale/imx8mp-verdin-dev.dtsi |   46 +
 .../imx8mp-verdin-nonwifi-dahlia.dts          |   18 +
 .../freescale/imx8mp-verdin-nonwifi-dev.dts   |   18 +
 .../dts/freescale/imx8mp-verdin-nonwifi.dtsi  |   54 +
 .../freescale/imx8mp-verdin-wifi-dahlia.dts   |   18 +
 .../dts/freescale/imx8mp-verdin-wifi-dev.dts  |   18 +
 .../dts/freescale/imx8mp-verdin-wifi.dtsi     |   82 +
 .../boot/dts/freescale/imx8mp-verdin.dtsi     | 1380 +++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mp.dtsi     |    2 +
 12 files changed, 1790 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi

-- 
2.35.1

On Fri, Apr 08, 2022 at 04:57:22PM +0200, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> 
> 
> Add DMA properties to uart2 node of the base i.MX 8M Plus device tree,
> add toradex,verdin-imx8mp et al. to dt-bindings and finally, add
> initial support for Verdin iMX8M Plus.
> 
> Changes in v3:
> - Add missing audio codec todo on development board as well.
> - Actually define scl/sda-gpios for Verdin I2C_2_DSI aka i2c2. Also
>   pointed out by Laurent. Thanks!
> - Update PMIC LDO4 and I2C level shifter enablement comment.
> - Fix USDHC2_VSELECT sleep pinctrl value and add a comment.
> - Add comment about lowering frequency on Verdin I2C_2_DSI as suggested
>   by Laurent.
> - Re-based on top of Shawn's latest for-next based on 5.18-rc1.
> 
> Changes in v2:
> - Add Laurent's reviewed-by tag.
> - Add Krzysztof's reviewed-by tag.
> - Fix capitalisation of verdin in comments as reported by Laurent.
> - Add/modify todo comments as suggested by Laurent.
> - Add Laurent's reviewed- and tested-by tags.
> 
> Marcel Ziswiler (3):
>   arm64: dts: imx8mp: add uart2 dma
>   dt-bindings: arm: fsl: add toradex,verdin-imx8mp et al.
>   arm64: dts: freescale: add initial support for verdin imx8m plus

Applied all, thanks!