[PATCH V2 05/15] cpufreq: mediatek: Enable clocks and regulators

Rex-BC Chen posted 15 patches 2 years, 5 months ago
Only 14 patches received!
There is a newer version of this series
[PATCH V2 05/15] cpufreq: mediatek: Enable clocks and regulators
Posted by Rex-BC Chen 2 years, 5 months ago
From: Jia-Wei Chang <jia-wei.chang@mediatek.com>

We need to enable regulators so that the max and min requested values will
be recorded.
The intermediate clock is not always enabled by CCF in different projects,
so we should enable it in the cpufreq driver.

Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com>
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
---
 drivers/cpufreq/mediatek-cpufreq.c | 50 +++++++++++++++++++++++++++---
 1 file changed, 45 insertions(+), 5 deletions(-)

diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index 2a2859dbc5e0..dc4a87e68940 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -332,10 +332,23 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 		goto out_free_resources;
 	}
 
+	ret = regulator_enable(info->proc_reg);
+	if (ret) {
+		dev_warn(cpu_dev, "cpu%d: failed to enable vproc\n", cpu);
+		goto out_free_resources;
+	}
+
 	/* Both presence and absence of sram regulator are valid cases. */
 	info->sram_reg = regulator_get_exclusive(cpu_dev, "sram");
 	if (IS_ERR(info->sram_reg))
 		info->sram_reg = NULL;
+	else {
+		ret = regulator_enable(info->sram_reg);
+		if (ret) {
+			dev_warn(cpu_dev, "cpu%d: failed to enable vsram\n", cpu);
+			goto out_free_resources;
+		}
+	}
 
 	/* Get OPP-sharing information from "operating-points-v2" bindings */
 	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, &info->cpus);
@@ -351,13 +364,21 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 		goto out_free_resources;
 	}
 
+	ret = clk_prepare_enable(info->cpu_clk);
+	if (ret)
+		goto out_free_opp_table;
+
+	ret = clk_prepare_enable(info->inter_clk);
+	if (ret)
+		goto out_disable_mux_clock;
+
 	/* Search a safe voltage for intermediate frequency. */
 	rate = clk_get_rate(info->inter_clk);
 	opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate);
 	if (IS_ERR(opp)) {
 		dev_err(cpu_dev, "cpu%d: failed to get intermediate opp\n", cpu);
 		ret = PTR_ERR(opp);
-		goto out_free_opp_table;
+		goto out_disable_inter_clock;
 	}
 	info->intermediate_voltage = dev_pm_opp_get_voltage(opp);
 	dev_pm_opp_put(opp);
@@ -370,10 +391,21 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 
 	return 0;
 
+out_disable_inter_clock:
+	clk_disable_unprepare(info->inter_clk);
+
+out_disable_mux_clock:
+	clk_disable_unprepare(info->cpu_clk);
+
 out_free_opp_table:
 	dev_pm_opp_of_cpumask_remove_table(&info->cpus);
 
 out_free_resources:
+	if (regulator_is_enabled(info->proc_reg))
+		regulator_disable(info->proc_reg);
+	if (info->sram_reg && regulator_is_enabled(info->sram_reg))
+		regulator_disable(info->sram_reg);
+
 	if (!IS_ERR(info->proc_reg))
 		regulator_put(info->proc_reg);
 	if (!IS_ERR(info->sram_reg))
@@ -388,14 +420,22 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 
 static void mtk_cpu_dvfs_info_release(struct mtk_cpu_dvfs_info *info)
 {
-	if (!IS_ERR(info->proc_reg))
+	if (!IS_ERR(info->proc_reg)) {
+		regulator_disable(info->proc_reg);
 		regulator_put(info->proc_reg);
-	if (!IS_ERR(info->sram_reg))
+	}
+	if (!IS_ERR(info->sram_reg)) {
+		regulator_disable(info->sram_reg);
 		regulator_put(info->sram_reg);
-	if (!IS_ERR(info->cpu_clk))
+	}
+	if (!IS_ERR(info->cpu_clk)) {
+		clk_disable_unprepare(info->cpu_clk);
 		clk_put(info->cpu_clk);
-	if (!IS_ERR(info->inter_clk))
+	}
+	if (!IS_ERR(info->inter_clk)) {
+		clk_disable_unprepare(info->inter_clk);
 		clk_put(info->inter_clk);
+	}
 
 	dev_pm_opp_of_cpumask_remove_table(&info->cpus);
 }
-- 
2.18.0
Re: [PATCH V2 05/15] cpufreq: mediatek: Enable clocks and regulators
Posted by AngeloGioacchino Del Regno 2 years, 5 months ago
Il 08/04/22 06:58, Rex-BC Chen ha scritto:
> From: Jia-Wei Chang <jia-wei.chang@mediatek.com>
> 
> We need to enable regulators so that the max and min requested values will
> be recorded.
> The intermediate clock is not always enabled by CCF in different projects,
> so we should enable it in the cpufreq driver.
> 
> Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com>
> Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Re: [PATCH V2 05/15] cpufreq: mediatek: Enable clocks and regulators
Posted by Viresh Kumar 2 years, 5 months ago
On 08-04-22, 15:36, AngeloGioacchino Del Regno wrote:
> Il 08/04/22 06:58, Rex-BC Chen ha scritto:
> > From: Jia-Wei Chang <jia-wei.chang@mediatek.com>
> > 
> > We need to enable regulators so that the max and min requested values will
> > be recorded.
> > The intermediate clock is not always enabled by CCF in different projects,
> > so we should enable it in the cpufreq driver.
> > 
> > Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com>
> > Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
> > Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
> 
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Applied. Thanks.

-- 
viresh