Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt | 2 +- Documentation/devicetree/bindings/spi/spi-davinci.txt | 2 +- Documentation/devicetree/bindings/spi/spi-pl022.yaml | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt | 2 +-
Documentation/devicetree/bindings/spi/spi-davinci.txt | 2 +-
Documentation/devicetree/bindings/spi/spi-pl022.yaml | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt b/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
index 74981520d6dd..a99de13c7ccd 100644
--- a/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
@@ -17,7 +17,7 @@ spi-nor-controller@10000000 {
reg = <0x10000000 0x1000>, <0x14000000 0x1000000>;
reg-names = "control", "memory";
clocks = <&clock HI3519_FMC_CLK>;
- spi-nor@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
};
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 200c7fc7b089..f012888656ec 100644
--- a/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -78,7 +78,7 @@ spi0:spi@20bf0000 {
interrupts = <338>;
clocks = <&clkspi>;
- flash: n25q032@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32";
diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
index bda45ff3d294..0e382119c64f 100644
--- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
@@ -143,7 +143,7 @@ examples:
<&dma_controller 24 0>;
dma-names = "rx", "tx";
- m25p80@1 {
+ flash@1 {
compatible = "st,m25p80";
reg = <1>;
spi-max-frequency = <12000000>;
--
2.32.0
On Thu, Apr 07, 2022 at 04:34:05PM +0200, Krzysztof Kozlowski wrote: > The node names should be generic and SPI NOR dtschema expects "flash". > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt | 2 +- > Documentation/devicetree/bindings/spi/spi-davinci.txt | 2 +- > Documentation/devicetree/bindings/spi/spi-pl022.yaml | 2 +- Acked-by: Mark Brown <broonie@kernel.org> but it would be easier to split this into per subsystem stuff.
On 07/04/2022 17:15, Mark Brown wrote: > On Thu, Apr 07, 2022 at 04:34:05PM +0200, Krzysztof Kozlowski wrote: >> The node names should be generic and SPI NOR dtschema expects "flash". >> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> --- >> Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt | 2 +- >> Documentation/devicetree/bindings/spi/spi-davinci.txt | 2 +- >> Documentation/devicetree/bindings/spi/spi-pl022.yaml | 2 +- > > Acked-by: Mark Brown <broonie@kernel.org> > > but it would be easier to split this into per subsystem stuff. With DTS changes I had 22 patches, so splitting is a trade-off. If that's preferred (actually can reduce conflicts), I'll split it and send a v2. Best regards, Krzysztof
On Thu, Apr 07, 2022 at 05:23:40PM +0200, Krzysztof Kozlowski wrote: > On 07/04/2022 17:15, Mark Brown wrote: > > On Thu, Apr 07, 2022 at 04:34:05PM +0200, Krzysztof Kozlowski wrote: > >> The node names should be generic and SPI NOR dtschema expects "flash". > >> > >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > >> --- > >> Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt | 2 +- > >> Documentation/devicetree/bindings/spi/spi-davinci.txt | 2 +- > >> Documentation/devicetree/bindings/spi/spi-pl022.yaml | 2 +- > > > > Acked-by: Mark Brown <broonie@kernel.org> > > > > but it would be easier to split this into per subsystem stuff. > > With DTS changes I had 22 patches, so splitting is a trade-off. If > that's preferred (actually can reduce conflicts), I'll split it and send > a v2. I've applied it. Really, I would have just fixed spi-pl022.yaml. In general, I'm not that interested in taking fixes on the .txt bindings. Rob
Hi Krzysztof, krzysztof.kozlowski@linaro.org wrote on Thu, 7 Apr 2022 16:34:05 +0200: > The node names should be generic and SPI NOR dtschema expects "flash". > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Thanks, Miquèl
© 2016 - 2026 Red Hat, Inc.