1. Patchew
  2. linux
  3. View series

[RFT] ufs: qcom: drop custom Android boot parameters

Krzysztof Kozlowski posted 1 patch 4 years, 3 months ago
There is a newer version of this series
drivers/scsi/ufs/ufs-qcom.c | 15 ---------------
1 file changed, 15 deletions(-)
[RFT] ufs: qcom: drop custom Android boot parameters
Posted by Krzysztof Kozlowski 4 years, 3 months ago 
The QCOM UFS driver requires an androidboot.bootdevice command line
argument matching the UFS device name.  If the name is different, it
refuses to probe.  Thise androidboot.bootdevice is provided by
stock/vendor (from an Android-based device) bootloader.

This does not make sense from Linux point of view.  Driver should be
able to boot regardless of bootloader.  Driver should not depend on some
Android custom environment data.

Cc: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Not tested, please kindly provide tests.

See also:
https://lore.kernel.org/linux-devicetree/f61abc2b-3ce8-7b1f-3d28-8a4a03ec58eb@kernel.org/T/#u
---
 drivers/scsi/ufs/ufs-qcom.c | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 0d2e950d0865..586c0e567ff9 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -957,18 +957,6 @@ static const struct reset_control_ops ufs_qcom_reset_ops = {
 	.deassert = ufs_qcom_reset_deassert,
 };
 
-#define	ANDROID_BOOT_DEV_MAX	30
-static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
-
-#ifndef MODULE
-static int __init get_android_boot_dev(char *str)
-{
-	strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX);
-	return 1;
-}
-__setup("androidboot.bootdevice=", get_android_boot_dev);
-#endif
-
 /**
  * ufs_qcom_init - bind phy with controller
  * @hba: host controller instance
@@ -988,9 +976,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
 	struct resource *res;
 	struct ufs_clk_info *clki;
 
-	if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev)))
-		return -ENODEV;
-
 	host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
 	if (!host) {
 		err = -ENOMEM;
-- 
2.32.0
Re: [RFT] ufs: qcom: drop custom Android boot parameters
Posted by Amit Pundir 4 years, 3 months ago 
On Sun, 20 Mar 2022 at 16:36, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> The QCOM UFS driver requires an androidboot.bootdevice command line
> argument matching the UFS device name.  If the name is different, it
> refuses to probe.  Thise androidboot.bootdevice is provided by
> stock/vendor (from an Android-based device) bootloader.
>
> This does not make sense from Linux point of view.  Driver should be
> able to boot regardless of bootloader.  Driver should not depend on some
> Android custom environment data.
>

No obvious regression on QCOM devboards DB845c (sdm845) and RB5
(sm8250), and Xiaomi Pocophone F1 (sdm845) running AOSP.

Tested-by: Amit Pundir <amit.pundir@linaro.org>

> Cc: Luca Weiss <luca.weiss@fairphone.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> ---
>
> Not tested, please kindly provide tests.
>
> See also:
> https://lore.kernel.org/linux-devicetree/f61abc2b-3ce8-7b1f-3d28-8a4a03ec58eb@kernel.org/T/#u
> ---
>  drivers/scsi/ufs/ufs-qcom.c | 15 ---------------
>  1 file changed, 15 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index 0d2e950d0865..586c0e567ff9 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -957,18 +957,6 @@ static const struct reset_control_ops ufs_qcom_reset_ops = {
>         .deassert = ufs_qcom_reset_deassert,
>  };
>
> -#define        ANDROID_BOOT_DEV_MAX    30
> -static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
> -
> -#ifndef MODULE
> -static int __init get_android_boot_dev(char *str)
> -{
> -       strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX);
> -       return 1;
> -}
> -__setup("androidboot.bootdevice=", get_android_boot_dev);
> -#endif
> -
>  /**
>   * ufs_qcom_init - bind phy with controller
>   * @hba: host controller instance
> @@ -988,9 +976,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
>         struct resource *res;
>         struct ufs_clk_info *clki;
>
> -       if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev)))
> -               return -ENODEV;
> -
>         host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
>         if (!host) {
>                 err = -ENOMEM;
> --
> 2.32.0
>
RE: [RFT] ufs: qcom: drop custom Android boot parameters
Posted by Alim Akhtar 4 years, 3 months ago 

>-----Original Message-----
>From: Krzysztof Kozlowski [mailto:krzk@kernel.org]
>Sent: Sunday, March 20, 2022 4:36 PM
>To: Andy Gross <agross@kernel.org>; Bjorn Andersson
><bjorn.andersson@linaro.org>; Alim Akhtar <alim.akhtar@samsung.com>;
>Avri Altman <avri.altman@wdc.com>; James E.J. Bottomley
><jejb@linux.ibm.com>; Martin K. Petersen <martin.petersen@oracle.com>;
>linux-arm-msm@vger.kernel.org; linux-scsi@vger.kernel.org; linux-
>kernel@vger.kernel.org
>Cc: Krzysztof Kozlowski <krzk@kernel.org>; Luca Weiss
><luca.weiss@fairphone.com>
>Subject: [RFT] ufs: qcom: drop custom Android boot parameters
>
>The QCOM UFS driver requires an androidboot.bootdevice command line
>argument matching the UFS device name.  If the name is different, it
refuses
>to probe.  Thise androidboot.bootdevice is provided by stock/vendor (from
an


In case you are resending 
s/thise/this

Rest looks good.

>Android-based device) bootloader.
>
>This does not make sense from Linux point of view.  Driver should be able
to
>boot regardless of bootloader.  Driver should not depend on some Android
>custom environment data.
>
>Cc: Luca Weiss <luca.weiss@fairphone.com>
>Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
>---
>
>Not tested, please kindly provide tests.
>
>See also:
>https://lore.kernel.org/linux-devicetree/f61abc2b-3ce8-7b1f-3d28-
>8a4a03ec58eb@kernel.org/T/#u
>---
> drivers/scsi/ufs/ufs-qcom.c | 15 ---------------
> 1 file changed, 15 deletions(-)
>
>diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index
>0d2e950d0865..586c0e567ff9 100644
>--- a/drivers/scsi/ufs/ufs-qcom.c
>+++ b/drivers/scsi/ufs/ufs-qcom.c
>@@ -957,18 +957,6 @@ static const struct reset_control_ops
>ufs_qcom_reset_ops = {
> 	.deassert = ufs_qcom_reset_deassert,
> };
>
>-#define	ANDROID_BOOT_DEV_MAX	30
>-static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
>-
>-#ifndef MODULE
>-static int __init get_android_boot_dev(char *str) -{
>-	strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX);
>-	return 1;
>-}
>-__setup("androidboot.bootdevice=", get_android_boot_dev); -#endif
>-
> /**
>  * ufs_qcom_init - bind phy with controller
>  * @hba: host controller instance
>@@ -988,9 +976,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
> 	struct resource *res;
> 	struct ufs_clk_info *clki;
>
>-	if (strlen(android_boot_dev) && strcmp(android_boot_dev,
>dev_name(dev)))
>-		return -ENODEV;
>-
> 	host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
> 	if (!host) {
> 		err = -ENOMEM;
>--
>2.32.0
Re: [RFT] ufs: qcom: drop custom Android boot parameters
Posted by Luca Weiss 4 years, 3 months ago 
Hi Krzysztof,

On Sun Mar 20, 2022 at 12:06 PM CET, Krzysztof Kozlowski wrote:
> The QCOM UFS driver requires an androidboot.bootdevice command line
> argument matching the UFS device name.  If the name is different, it
> refuses to probe.  Thise androidboot.bootdevice is provided by
> stock/vendor (from an Android-based device) bootloader.
>
> This does not make sense from Linux point of view.  Driver should be
> able to boot regardless of bootloader.  Driver should not depend on some
> Android custom environment data.
>
> Cc: Luca Weiss <luca.weiss@fairphone.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

As expected this makes UFS probe even if the node is named ufs@1d84000
on my device.

While I don't know why the code existed in the first place, it was added
back in 2015 with the introduction of the driver, so probably it's just
some remains from downstream that weren't cleaned up back then.

With this commit also 6b9afd8f96c6 ("arm64: dts: qcom: sm8250: change
ufs node name to ufshc") could be reverted (but it would probably make
more sense to rename all ufshc@ to ufs@ in a new commit).

Tested-by: Luca Weiss <luca.weiss@fairphone.com>

Regards
Luca

>
> ---
>
> Not tested, please kindly provide tests.
>
> See also:
> https://lore.kernel.org/linux-devicetree/f61abc2b-3ce8-7b1f-3d28-8a4a03ec58eb@kernel.org/T/#u
> ---
>  drivers/scsi/ufs/ufs-qcom.c | 15 ---------------
>  1 file changed, 15 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index 0d2e950d0865..586c0e567ff9 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -957,18 +957,6 @@ static const struct reset_control_ops ufs_qcom_reset_ops = {
>  	.deassert = ufs_qcom_reset_deassert,
>  };
>  
> -#define	ANDROID_BOOT_DEV_MAX	30
> -static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
> -
> -#ifndef MODULE
> -static int __init get_android_boot_dev(char *str)
> -{
> -	strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX);
> -	return 1;
> -}
> -__setup("androidboot.bootdevice=", get_android_boot_dev);
> -#endif
> -
>  /**
>   * ufs_qcom_init - bind phy with controller
>   * @hba: host controller instance
> @@ -988,9 +976,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
>  	struct resource *res;
>  	struct ufs_clk_info *clki;
>  
> -	if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev)))
> -		return -ENODEV;
> -
>  	host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
>  	if (!host) {
>  		err = -ENOMEM;
> -- 
> 2.32.0
Re: [RFT] ufs: qcom: drop custom Android boot parameters
Posted by Luca Weiss 4 years, 3 months ago 
Hi all again,

On Mon Mar 21, 2022 at 12:58 PM CET, Luca Weiss wrote:
> Hi Krzysztof,
>
> On Sun Mar 20, 2022 at 12:06 PM CET, Krzysztof Kozlowski wrote:
> > The QCOM UFS driver requires an androidboot.bootdevice command line
> > argument matching the UFS device name.  If the name is different, it
> > refuses to probe.  Thise androidboot.bootdevice is provided by
> > stock/vendor (from an Android-based device) bootloader.
> >
> > This does not make sense from Linux point of view.  Driver should be
> > able to boot regardless of bootloader.  Driver should not depend on some
> > Android custom environment data.
> >
> > Cc: Luca Weiss <luca.weiss@fairphone.com>
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> As expected this makes UFS probe even if the node is named ufs@1d84000
> on my device.
>
> While I don't know why the code existed in the first place, it was added
> back in 2015 with the introduction of the driver, so probably it's just
> some remains from downstream that weren't cleaned up back then.

I went digging a bit and found the original commit from downstream:
https://source.codeaurora.org/quic/la/kernel/msm-3.18/commit/?id=15e2c78d6a7ec73be941e058671942fd9f72b128

<quote>
Boot device can be either UFS or eMMC which means if eMMC is the boot
device, probing UFS device is not desirable as it's not going to be
used after probing. Kernel command line parameter "android.bootdevice"
tells the kernel about the boot device so look at this boot device
parameter to know whether to probe UFS device or not.
</quote>

Should be safe to remove.

Regards
Luca


>
> With this commit also 6b9afd8f96c6 ("arm64: dts: qcom: sm8250: change
> ufs node name to ufshc") could be reverted (but it would probably make
> more sense to rename all ufshc@ to ufs@ in a new commit).
>
> Tested-by: Luca Weiss <luca.weiss@fairphone.com>
>
> Regards
> Luca
>
> >
> > ---
> >
> > Not tested, please kindly provide tests.
> >
> > See also:
> > https://lore.kernel.org/linux-devicetree/f61abc2b-3ce8-7b1f-3d28-8a4a03ec58eb@kernel.org/T/#u
> > ---
> >  drivers/scsi/ufs/ufs-qcom.c | 15 ---------------
> >  1 file changed, 15 deletions(-)
> >
> > diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> > index 0d2e950d0865..586c0e567ff9 100644
> > --- a/drivers/scsi/ufs/ufs-qcom.c
> > +++ b/drivers/scsi/ufs/ufs-qcom.c
> > @@ -957,18 +957,6 @@ static const struct reset_control_ops ufs_qcom_reset_ops = {
> >  	.deassert = ufs_qcom_reset_deassert,
> >  };
> >  
> > -#define	ANDROID_BOOT_DEV_MAX	30
> > -static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
> > -
> > -#ifndef MODULE
> > -static int __init get_android_boot_dev(char *str)
> > -{
> > -	strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX);
> > -	return 1;
> > -}
> > -__setup("androidboot.bootdevice=", get_android_boot_dev);
> > -#endif
> > -
> >  /**
> >   * ufs_qcom_init - bind phy with controller
> >   * @hba: host controller instance
> > @@ -988,9 +976,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
> >  	struct resource *res;
> >  	struct ufs_clk_info *clki;
> >  
> > -	if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev)))
> > -		return -ENODEV;
> > -
> >  	host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
> >  	if (!host) {
> >  		err = -ENOMEM;
> > -- 
> > 2.32.0
Re: [RFT] ufs: qcom: drop custom Android boot parameters
Posted by Brian Masney 4 years, 3 months ago 
On Sun, Mar 20, 2022 at 12:06:16PM +0100, Krzysztof Kozlowski wrote:
> The QCOM UFS driver requires an androidboot.bootdevice command line
> argument matching the UFS device name.  If the name is different, it
> refuses to probe.  Thise androidboot.bootdevice is provided by
> stock/vendor (from an Android-based device) bootloader.
> 
> This does not make sense from Linux point of view.  Driver should be
> able to boot regardless of bootloader.  Driver should not depend on some
> Android custom environment data.
> 
> Cc: Luca Weiss <luca.weiss@fairphone.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

I encountered that same code a few months ago and thought then that
this code doesn't belong here.

Reviewed-by: Brian Masney <bmasney@redhat.com>
Re: [RFT] ufs: qcom: drop custom Android boot parameters
Posted by Bjorn Andersson 4 years, 3 months ago 
On Sun 20 Mar 06:06 CDT 2022, Krzysztof Kozlowski wrote:

> The QCOM UFS driver requires an androidboot.bootdevice command line
> argument matching the UFS device name.  If the name is different, it
> refuses to probe.  Thise androidboot.bootdevice is provided by
> stock/vendor (from an Android-based device) bootloader.
> 
> This does not make sense from Linux point of view.  Driver should be
> able to boot regardless of bootloader.  Driver should not depend on some
> Android custom environment data.
> 
> Cc: Luca Weiss <luca.weiss@fairphone.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
> 
> Not tested, please kindly provide tests.
> 
> See also:
> https://lore.kernel.org/linux-devicetree/f61abc2b-3ce8-7b1f-3d28-8a4a03ec58eb@kernel.org/T/#u
> ---
>  drivers/scsi/ufs/ufs-qcom.c | 15 ---------------
>  1 file changed, 15 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index 0d2e950d0865..586c0e567ff9 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -957,18 +957,6 @@ static const struct reset_control_ops ufs_qcom_reset_ops = {
>  	.deassert = ufs_qcom_reset_deassert,
>  };
>  
> -#define	ANDROID_BOOT_DEV_MAX	30
> -static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
> -
> -#ifndef MODULE
> -static int __init get_android_boot_dev(char *str)
> -{
> -	strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX);
> -	return 1;
> -}
> -__setup("androidboot.bootdevice=", get_android_boot_dev);
> -#endif
> -
>  /**
>   * ufs_qcom_init - bind phy with controller
>   * @hba: host controller instance
> @@ -988,9 +976,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
>  	struct resource *res;
>  	struct ufs_clk_info *clki;
>  
> -	if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev)))
> -		return -ENODEV;
> -
>  	host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
>  	if (!host) {
>  		err = -ENOMEM;
> -- 
> 2.32.0
>

Patchew 2.1-devel-ea86937

© 2016 - 2026 Red Hat, Inc.