Add the gpio-line-names property to gpio-controller in order to
document the usage of GPIOs on the Asurada platform.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
.../boot/dts/mediatek/mt8192-asurada.dtsi | 228 ++++++++++++++++++
1 file changed, 228 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 277bd38943fe..e10636298639 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -21,6 +21,234 @@ memory@40000000 {
};
};
+&pio {
+ /* 220 lines */
+ gpio-line-names = "I2S_DP_LRCK",
+ "IS_DP_BCLK",
+ "I2S_DP_MCLK",
+ "I2S_DP_DATAOUT",
+ "SAR0_INT_ODL",
+ "EC_AP_INT_ODL",
+ "EDPBRDG_INT_ODL",
+ "DPBRDG_INT_ODL",
+ "DPBRDG_PWREN",
+ "DPBRDG_RST_ODL",
+ "I2S_HP_MCLK",
+ "I2S_HP_BCK",
+ "I2S_HP_LRCK",
+ "I2S_HP_DATAIN",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it AP_FLASH_WP_ODL.
+ */
+ "AP_FLASH_WP_L",
+ "TRACKPAD_INT_ODL",
+ "EC_AP_HPD_OD",
+ "SD_CD_ODL",
+ "HP_INT_ODL_ALC",
+ "EN_PP1000_DPBRDG",
+ "AP_GPIO20",
+ "TOUCH_INT_L_1V8",
+ "UART_BT_WAKE_ODL",
+ "AP_GPIO23",
+ "AP_SPI_FLASH_CS_L",
+ "AP_SPI_FLASH_CLK",
+ "EN_PP3300_DPBRDG_DX",
+ "AP_SPI_FLASH_MOSI",
+ "AP_SPI_FLASH_MISO",
+ "I2S_HP_DATAOUT",
+ "AP_GPIO30",
+ "I2S_SPKR_MCLK",
+ "I2S_SPKR_BCLK",
+ "I2S_SPKR_LRCK",
+ "I2S_SPKR_DATAIN",
+ "I2S_SPKR_DATAOUT",
+ "AP_SPI_H1_TPM_CLK",
+ "AP_SPI_H1_TPM_CS_L",
+ "AP_SPI_H1_TPM_MISO",
+ "AP_SPI_H1_TPM_MOSI",
+ "BL_PWM",
+ "EDPBRDG_PWREN",
+ "EDPBRDG_RST_ODL",
+ "EN_PP3300_HUB",
+ "HUB_RST_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SD_CLK",
+ "SD_CMD",
+ "SD_DATA3",
+ "SD_DATA0",
+ "SD_DATA2",
+ "SD_DATA1",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "PCIE_WAKE_ODL",
+ "PCIE_RST_L",
+ "PCIE_CLKREQ_ODL",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SPMI_SCL",
+ "SPMI_SDA",
+ "AP_GOOD",
+ "UART_DBG_TX_AP_RX",
+ "UART_AP_TX_DBG_RX",
+ "UART_AP_TX_BT_RX",
+ "UART_BT_TX_AP_RX",
+ "MIPI_DPI_D0_R",
+ "MIPI_DPI_D1_R",
+ "MIPI_DPI_D2_R",
+ "MIPI_DPI_D3_R",
+ "MIPI_DPI_D4_R",
+ "MIPI_DPI_D5_R",
+ "MIPI_DPI_D6_R",
+ "MIPI_DPI_D7_R",
+ "MIPI_DPI_D8_R",
+ "MIPI_DPI_D9_R",
+ "MIPI_DPI_D10_R",
+ "",
+ "",
+ "MIPI_DPI_DE_R",
+ "MIPI_DPI_D11_R",
+ "MIPI_DPI_VSYNC_R",
+ "MIPI_DPI_CLK_R",
+ "MIPI_DPI_HSYNC_R",
+ "PCM_BT_DATAIN",
+ "PCM_BT_SYNC",
+ "PCM_BT_DATAOUT",
+ "PCM_BT_CLK",
+ "AP_I2C_AUDIO_SCL",
+ "AP_I2C_AUDIO_SDA",
+ "SCP_I2C_SCL",
+ "SCP_I2C_SDA",
+ "AP_I2C_WLAN_SCL",
+ "AP_I2C_WLAN_SDA",
+ "AP_I2C_DPBRDG_SCL",
+ "AP_I2C_DPBRDG_SDA",
+ "EN_PP1800_DPBRDG_DX",
+ "EN_PP3300_EDP_DX",
+ "EN_PP1800_EDPBRDG_DX",
+ "EN_PP1000_EDPBRDG",
+ "SCP_JTAG0_TDO",
+ "SCP_JTAG0_TDI",
+ "SCP_JTAG0_TMS",
+ "SCP_JTAG0_TCK",
+ "SCP_JTAG0_TRSTN",
+ "EN_PP3000_VMC_PMU",
+ "EN_PP3300_DISPLAY_DX",
+ "TOUCH_RST_L_1V8",
+ "TOUCH_REPORT_DISABLE",
+ "",
+ "",
+ "AP_I2C_TRACKPAD_SCL_1V8",
+ "AP_I2C_TRACKPAD_SDA_1V8",
+ "EN_PP3300_WLAN",
+ "BT_KILL_L",
+ "WIFI_KILL_L",
+ "SET_VMC_VOLT_AT_1V8",
+ "EN_SPK",
+ "AP_WARM_RST_REQ",
+ "",
+ "",
+ "EN_PP3000_SD_S3",
+ "AP_EDP_BKLTEN",
+ "",
+ "",
+ "",
+ "AP_SPI_EC_CLK",
+ "AP_SPI_EC_CS_L",
+ "AP_SPI_EC_MISO",
+ "AP_SPI_EC_MOSI",
+ "AP_I2C_EDPBRDG_SCL",
+ "AP_I2C_EDPBRDG_SDA",
+ "MT6315_PROC_INT",
+ "MT6315_GPU_INT",
+ "UART_SERVO_TX_SCP_RX",
+ "UART_SCP_TX_SERVO_RX",
+ "BT_RTS_AP_CTS",
+ "AP_RTS_BT_CTS",
+ "UART_AP_WAKE_BT_ODL",
+ "WLAN_ALERT_ODL",
+ "EC_IN_RW_ODL",
+ "H1_AP_INT_ODL",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "MSDC0_CMD",
+ "MSDC0_DAT0",
+ "MSDC0_DAT2",
+ "MSDC0_DAT4",
+ "MSDC0_DAT6",
+ "MSDC0_DAT1",
+ "MSDC0_DAT5",
+ "MSDC0_DAT7",
+ "MSDC0_DSL",
+ "MSDC0_CLK",
+ "MSDC0_DAT3",
+ "MSDC0_RST_L",
+ "SCP_VREQ_VAO",
+ "AUD_DAT_MOSI2",
+ "AUD_NLE_MOSI1",
+ "AUD_NLE_MOSI0",
+ "AUD_DAT_MISO2",
+ "AP_I2C_SAR_SDA",
+ "AP_I2C_SAR_SCL",
+ "AP_I2C_PWR_SCL",
+ "AP_I2C_PWR_SDA",
+ "AP_I2C_TS_SCL_1V8",
+ "AP_I2C_TS_SDA_1V8",
+ "SRCLKENA0",
+ "SRCLKENA1",
+ "AP_EC_WATCHDOG_L",
+ "PWRAP_SPI0_MI",
+ "PWRAP_SPI0_CSN",
+ "PWRAP_SPI0_MO",
+ "PWRAP_SPI0_CK",
+ "AP_RTC_CLK32K",
+ "AUD_CLK_MOSI",
+ "AUD_SYNC_MOSI",
+ "AUD_DAT_MOSI0",
+ "AUD_DAT_MOSI1",
+ "AUD_DAT_MISO0",
+ "AUD_DAT_MISO1";
+};
+
&uart0 {
status = "okay";
};
--
2.35.1