[v2] Add support for ARTPEC-8 UART

[PATCH v2 0/2] Add support for ARTPEC-8 UART

Vincent Whitchurch posted 2 patches 4 years, 3 months ago

Diff against v1
Download series mbox

.../bindings/serial/samsung_uart.yaml         |  2 +
drivers/tty/serial/Kconfig                    |  2 +-
drivers/tty/serial/samsung_tty.c              | 37 +++++++++++++++++++
3 files changed, 40 insertions(+), 1 deletion(-)

Expand all Fold all

[PATCH v2 0/2] Add support for ARTPEC-8 UART

Posted by Vincent Whitchurch 4 years, 3 months ago

This series adds support for the UART hardware on the ARTPEC-8 chip.  This
block is already supported by an existing driver so only a small patch to
describe the properties of the variant is required.

v2:
- This version is based on top of Krzysztof's "minor fixes/cleanups" series
  since they will conflict otherwise.
- Expand commit messages
- Define required clocks in binding
- Fix FIFO size

Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: robh+dt@kernel.org
Cc: alim.akhtar@samsung.com

Vincent Whitchurch (2):
  dt-bindings: serial: samsung: Add ARTPEC-8 UART
  tty: serial: samsung: Add ARTPEC-8 support

 .../bindings/serial/samsung_uart.yaml         |  2 +
 drivers/tty/serial/Kconfig                    |  2 +-
 drivers/tty/serial/samsung_tty.c              | 37 +++++++++++++++++++
 3 files changed, 40 insertions(+), 1 deletion(-)

-- 
2.34.1