drivers/remoteproc/mtk_common.h | 4 +++ drivers/remoteproc/mtk_scp.c | 57 +++++++++++++++++++++++++++++---- 2 files changed, 55 insertions(+), 6 deletions(-)
The definition of L1TCM_SRAM_PDN bits on mt8195 is different to mt8192.
L1TCM_SRAM_PDN bits[3:0] control the power of mt8195 L1TCM SRAM.
L1TCM_SRAM_PDN bits[7:4] control the access path to EMI for SCP.
These bits have to be powered on to allow EMI access for SCP.
Bits[7:4] also affect audio DSP because audio DSP and SCP are
placed on the same hardware bus. If SCP cannot access EMI, audio DSP is
blocked too.
L1TCM_SRAM_PDN bits[31:8] are not used.
This fix removes modification of bits[7:4] when power on/off mt8195 SCP
L1TCM. It's because the modification introduces a short period of time
blocking audio DSP to access EMI. This was not a problem until we have
to load both SCP module and audio DSP module. audio DSP needs to access
EMI because it has source/data on DRAM. Audio DSP will have unexpected
behavior when it accesses EMI and the SCP driver blocks the EMI path at
the same time.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
---
drivers/remoteproc/mtk_common.h | 4 +++
drivers/remoteproc/mtk_scp.c | 57 +++++++++++++++++++++++++++++----
2 files changed, 55 insertions(+), 6 deletions(-)
diff --git a/drivers/remoteproc/mtk_common.h b/drivers/remoteproc/mtk_common.h
index 5ff3867c72f3..27e7172c926d 100644
--- a/drivers/remoteproc/mtk_common.h
+++ b/drivers/remoteproc/mtk_common.h
@@ -51,6 +51,10 @@
#define MT8192_CORE0_WDT_IRQ 0x10030
#define MT8192_CORE0_WDT_CFG 0x10034
+#define MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS 0xF0
+#define MT8195_L1TCM_SRAM_PDN_RESERVED_BITS \
+ MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS
+
#define SCP_FW_VER_LEN 32
#define SCP_SHARE_BUFFER_SIZE 288
diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index dcddb33e9997..4d75af856fd1 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -365,22 +365,32 @@ static int mt8183_scp_before_load(struct mtk_scp *scp)
return 0;
}
-static void mt8192_power_on_sram(void __iomem *addr)
+static void scp_sram_power_on(void __iomem *addr, u32 reserved_mask)
{
int i;
for (i = 31; i >= 0; i--)
- writel(GENMASK(i, 0), addr);
+ writel(GENMASK(i, 0) & ~reserved_mask, addr);
writel(0, addr);
}
-static void mt8192_power_off_sram(void __iomem *addr)
+static void scp_sram_power_off(void __iomem *addr, u32 reserved_mask)
{
int i;
writel(0, addr);
for (i = 0; i < 32; i++)
- writel(GENMASK(i, 0), addr);
+ writel(GENMASK(i, 0) & ~reserved_mask, addr);
+}
+
+static void mt8192_power_on_sram(void __iomem *addr)
+{
+ scp_sram_power_on(addr, 0);
+}
+
+static void mt8192_power_off_sram(void __iomem *addr)
+{
+ scp_sram_power_off(addr, 0);
}
static int mt8192_scp_before_load(struct mtk_scp *scp)
@@ -403,6 +413,27 @@ static int mt8192_scp_before_load(struct mtk_scp *scp)
return 0;
}
+static int mt8195_scp_before_load(struct mtk_scp *scp)
+{
+ /* clear SPM interrupt, SCP2SPM_IPC_CLR */
+ writel(0xff, scp->reg_base + MT8192_SCP2SPM_IPC_CLR);
+
+ writel(1, scp->reg_base + MT8192_CORE0_SW_RSTN_SET);
+
+ /* enable SRAM clock */
+ mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_0);
+ mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_1);
+ mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_2);
+ scp_sram_power_on(scp->reg_base + MT8192_L1TCM_SRAM_PDN,
+ MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);
+ mt8192_power_on_sram(scp->reg_base + MT8192_CPU0_SRAM_PD);
+
+ /* enable MPU for all memory regions */
+ writel(0xff, scp->reg_base + MT8192_CORE0_MEM_ATT_PREDEF);
+
+ return 0;
+}
+
static int scp_load(struct rproc *rproc, const struct firmware *fw)
{
struct mtk_scp *scp = rproc->priv;
@@ -561,6 +592,20 @@ static void mt8192_scp_stop(struct mtk_scp *scp)
writel(0, scp->reg_base + MT8192_CORE0_WDT_CFG);
}
+static void mt8195_scp_stop(struct mtk_scp *scp)
+{
+ /* Disable SRAM clock */
+ mt8192_power_off_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_0);
+ mt8192_power_off_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_1);
+ mt8192_power_off_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_2);
+ scp_sram_power_off(scp->reg_base + MT8192_L1TCM_SRAM_PDN,
+ MT8195_L1TCM_SRAM_PDN_RESERVED_BITS);
+ mt8192_power_off_sram(scp->reg_base + MT8192_CPU0_SRAM_PD);
+
+ /* Disable SCP watchdog */
+ writel(0, scp->reg_base + MT8192_CORE0_WDT_CFG);
+}
+
static int scp_stop(struct rproc *rproc)
{
struct mtk_scp *scp = (struct mtk_scp *)rproc->priv;
@@ -888,11 +933,11 @@ static const struct mtk_scp_of_data mt8192_of_data = {
static const struct mtk_scp_of_data mt8195_of_data = {
.scp_clk_get = mt8195_scp_clk_get,
- .scp_before_load = mt8192_scp_before_load,
+ .scp_before_load = mt8195_scp_before_load,
.scp_irq_handler = mt8192_scp_irq_handler,
.scp_reset_assert = mt8192_scp_reset_assert,
.scp_reset_deassert = mt8192_scp_reset_deassert,
- .scp_stop = mt8192_scp_stop,
+ .scp_stop = mt8195_scp_stop,
.scp_da_to_va = mt8192_scp_da_to_va,
.host_to_scp_reg = MT8192_GIPC_IN_SET,
.host_to_scp_int_bit = MT8192_HOST_IPC_INT_BIT,
--
2.18.0
Il 09/03/22 12:47, Tinghan Shen ha scritto: > The definition of L1TCM_SRAM_PDN bits on mt8195 is different to mt8192. > > L1TCM_SRAM_PDN bits[3:0] control the power of mt8195 L1TCM SRAM. > > L1TCM_SRAM_PDN bits[7:4] control the access path to EMI for SCP. > These bits have to be powered on to allow EMI access for SCP. > > Bits[7:4] also affect audio DSP because audio DSP and SCP are > placed on the same hardware bus. If SCP cannot access EMI, audio DSP is > blocked too. > > L1TCM_SRAM_PDN bits[31:8] are not used. > > This fix removes modification of bits[7:4] when power on/off mt8195 SCP > L1TCM. It's because the modification introduces a short period of time > blocking audio DSP to access EMI. This was not a problem until we have > to load both SCP module and audio DSP module. audio DSP needs to access > EMI because it has source/data on DRAM. Audio DSP will have unexpected > behavior when it accesses EMI and the SCP driver blocks the EMI path at > the same time. > > Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> > --- > drivers/remoteproc/mtk_common.h | 4 +++ > drivers/remoteproc/mtk_scp.c | 57 +++++++++++++++++++++++++++++---- > 2 files changed, 55 insertions(+), 6 deletions(-) > > diff --git a/drivers/remoteproc/mtk_common.h b/drivers/remoteproc/mtk_common.h > index 5ff3867c72f3..27e7172c926d 100644 > --- a/drivers/remoteproc/mtk_common.h > +++ b/drivers/remoteproc/mtk_common.h > @@ -51,6 +51,10 @@ > #define MT8192_CORE0_WDT_IRQ 0x10030 > #define MT8192_CORE0_WDT_CFG 0x10034 > > +#define MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS 0xF0 This is GENMASK(7, 4).. > +#define MT8195_L1TCM_SRAM_PDN_RESERVED_BITS \ > + MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS > + Why are you defining the same thing twice? Please drop this. > #define SCP_FW_VER_LEN 32 > #define SCP_SHARE_BUFFER_SIZE 288 > > diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c > index dcddb33e9997..4d75af856fd1 100644 > --- a/drivers/remoteproc/mtk_scp.c > +++ b/drivers/remoteproc/mtk_scp.c > @@ -365,22 +365,32 @@ static int mt8183_scp_before_load(struct mtk_scp *scp) > return 0; > } > > -static void mt8192_power_on_sram(void __iomem *addr) > +static void scp_sram_power_on(void __iomem *addr, u32 reserved_mask) > { > int i; > > for (i = 31; i >= 0; i--) > - writel(GENMASK(i, 0), addr); > + writel(GENMASK(i, 0) & ~reserved_mask, addr); > writel(0, addr); > } > > -static void mt8192_power_off_sram(void __iomem *addr) > +static void scp_sram_power_off(void __iomem *addr, u32 reserved_mask) > { > int i; > > writel(0, addr); > for (i = 0; i < 32; i++) > - writel(GENMASK(i, 0), addr); > + writel(GENMASK(i, 0) & ~reserved_mask, addr); > +} > + > +static void mt8192_power_on_sram(void __iomem *addr) > +{ > + scp_sram_power_on(addr, 0); > +} > + > +static void mt8192_power_off_sram(void __iomem *addr) > +{ > + scp_sram_power_off(addr, 0); > } > > static int mt8192_scp_before_load(struct mtk_scp *scp) > @@ -403,6 +413,27 @@ static int mt8192_scp_before_load(struct mtk_scp *scp) > return 0; > } > > +static int mt8195_scp_before_load(struct mtk_scp *scp) > +{ > + /* clear SPM interrupt, SCP2SPM_IPC_CLR */ > + writel(0xff, scp->reg_base + MT8192_SCP2SPM_IPC_CLR); > + > + writel(1, scp->reg_base + MT8192_CORE0_SW_RSTN_SET); > + > + /* enable SRAM clock */ > + mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_0); At this point, you can simply use scp_sram_power_{on, off} instead of defining a new function for just one call... I get that your intent here is to enhance human readability, but I don't think that this is really happening with that and, if it is, it's just about a little ignorable difference. Please use scp_sram_power_on() and scp_sram_power_off() directly. scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_1, 0); ... etc :) > + mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_1); > + mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_2); > + scp_sram_power_on(scp->reg_base + MT8192_L1TCM_SRAM_PDN, > + MT8195_L1TCM_SRAM_PDN_RESERVED_BITS); > + mt8192_power_on_sram(scp->reg_base + MT8192_CPU0_SRAM_PD); > + > + /* enable MPU for all memory regions */ > + writel(0xff, scp->reg_base + MT8192_CORE0_MEM_ATT_PREDEF); > + > + return 0; > +} > + Please remember to add me to the Cc's for the next version, so that I will be able to timely give you my R-b tag for this one. Regards, Angelo
Hi Angelo, I'll update your suggestions at next version. Thank you. Best regards, Tinghan On Thu, 2022-03-10 at 15:40 +0100, AngeloGioacchino Del Regno wrote: > Il 09/03/22 12:47, Tinghan Shen ha scritto: > > The definition of L1TCM_SRAM_PDN bits on mt8195 is different to mt8192. > > > > L1TCM_SRAM_PDN bits[3:0] control the power of mt8195 L1TCM SRAM. > > > > L1TCM_SRAM_PDN bits[7:4] control the access path to EMI for SCP. > > These bits have to be powered on to allow EMI access for SCP. > > > > Bits[7:4] also affect audio DSP because audio DSP and SCP are > > placed on the same hardware bus. If SCP cannot access EMI, audio DSP is > > blocked too. > > > > L1TCM_SRAM_PDN bits[31:8] are not used. > > > > This fix removes modification of bits[7:4] when power on/off mt8195 SCP > > L1TCM. It's because the modification introduces a short period of time > > blocking audio DSP to access EMI. This was not a problem until we have > > to load both SCP module and audio DSP module. audio DSP needs to access > > EMI because it has source/data on DRAM. Audio DSP will have unexpected > > behavior when it accesses EMI and the SCP driver blocks the EMI path at > > the same time. > > > > Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> > > --- > > drivers/remoteproc/mtk_common.h | 4 +++ > > drivers/remoteproc/mtk_scp.c | 57 +++++++++++++++++++++++++++++---- > > 2 files changed, 55 insertions(+), 6 deletions(-) > > > > diff --git a/drivers/remoteproc/mtk_common.h b/drivers/remoteproc/mtk_common.h > > index 5ff3867c72f3..27e7172c926d 100644 > > --- a/drivers/remoteproc/mtk_common.h > > +++ b/drivers/remoteproc/mtk_common.h > > @@ -51,6 +51,10 @@ > > #define MT8192_CORE0_WDT_IRQ 0x10030 > > #define MT8192_CORE0_WDT_CFG 0x10034 > > > > +#define MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS 0xF0 > > This is GENMASK(7, 4).. > > > +#define MT8195_L1TCM_SRAM_PDN_RESERVED_BITS \ > > + MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS > > + > > Why are you defining the same thing twice? > Please drop this. > > > #define SCP_FW_VER_LEN 32 > > #define SCP_SHARE_BUFFER_SIZE 288 > > > > diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c > > index dcddb33e9997..4d75af856fd1 100644 > > --- a/drivers/remoteproc/mtk_scp.c > > +++ b/drivers/remoteproc/mtk_scp.c > > @@ -365,22 +365,32 @@ static int mt8183_scp_before_load(struct mtk_scp *scp) > > return 0; > > } > > > > -static void mt8192_power_on_sram(void __iomem *addr) > > +static void scp_sram_power_on(void __iomem *addr, u32 reserved_mask) > > { > > int i; > > > > for (i = 31; i >= 0; i--) > > - writel(GENMASK(i, 0), addr); > > + writel(GENMASK(i, 0) & ~reserved_mask, addr); > > writel(0, addr); > > } > > > > -static void mt8192_power_off_sram(void __iomem *addr) > > +static void scp_sram_power_off(void __iomem *addr, u32 reserved_mask) > > { > > int i; > > > > writel(0, addr); > > for (i = 0; i < 32; i++) > > - writel(GENMASK(i, 0), addr); > > + writel(GENMASK(i, 0) & ~reserved_mask, addr); > > +} > > + > > +static void mt8192_power_on_sram(void __iomem *addr) > > +{ > > + scp_sram_power_on(addr, 0); > > +} > > + > > +static void mt8192_power_off_sram(void __iomem *addr) > > +{ > > + scp_sram_power_off(addr, 0); > > } > > > > static int mt8192_scp_before_load(struct mtk_scp *scp) > > @@ -403,6 +413,27 @@ static int mt8192_scp_before_load(struct mtk_scp *scp) > > return 0; > > } > > > > +static int mt8195_scp_before_load(struct mtk_scp *scp) > > +{ > > + /* clear SPM interrupt, SCP2SPM_IPC_CLR */ > > + writel(0xff, scp->reg_base + MT8192_SCP2SPM_IPC_CLR); > > + > > + writel(1, scp->reg_base + MT8192_CORE0_SW_RSTN_SET); > > + > > + /* enable SRAM clock */ > > + mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_0); > > At this point, you can simply use scp_sram_power_{on, off} instead of defining > a new function for just one call... I get that your intent here is to enhance > human readability, but I don't think that this is really happening with that and, > if it is, it's just about a little ignorable difference. > > Please use scp_sram_power_on() and scp_sram_power_off() directly. > > scp_sram_power_on(scp->reg_base + MT8192_L2TCM_SRAM_PD_1, 0); > ... etc :) > > > + mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_1); > > + mt8192_power_on_sram(scp->reg_base + MT8192_L2TCM_SRAM_PD_2); > > + scp_sram_power_on(scp->reg_base + MT8192_L1TCM_SRAM_PDN, > > + MT8195_L1TCM_SRAM_PDN_RESERVED_BITS); > > + mt8192_power_on_sram(scp->reg_base + MT8192_CPU0_SRAM_PD); > > + > > + /* enable MPU for all memory regions */ > > + writel(0xff, scp->reg_base + MT8192_CORE0_MEM_ATT_PREDEF); > > + > > + return 0; > > +} > > + > > Please remember to add me to the Cc's for the next version, so that I will be > able to timely give you my R-b tag for this one. > > Regards, > Angelo > >
© 2016 - 2024 Red Hat, Inc.