The binding defines the GPIO as "pdn-gpios" so when the GPIO is active
the expectation is that the power down signal is asserted, but the
driver swaps this to represent the inverted logic of the electrical
signal.

The GPIO_ACTIVE_HIGH/LOW flags should be used to identify the inverted
logic here with the driver treating power down as active when the mapped
GPIO value is 1.

Fixes: ec45268467f4 ("ASoC: add support for TAS5805M digital amplifier")
Signed-off-by: John Keeping <john@metanate.com>
---
 sound/soc/codecs/tas5805m.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/sound/soc/codecs/tas5805m.c b/sound/soc/codecs/tas5805m.c
index fa0e81ec875a..12146a860ef8 100644
--- a/sound/soc/codecs/tas5805m.c
+++ b/sound/soc/codecs/tas5805m.c
@@ -155,7 +155,7 @@ static const uint32_t tas5805m_volume[] = {
 
 struct tas5805m_priv {
 	struct regulator		*pvdd;
-	struct gpio_desc		*gpio_pdn_n;
+	struct gpio_desc		*gpio_pdn;
 
 	uint8_t				*dsp_cfg_data;
 	int				dsp_cfg_len;
@@ -444,11 +444,11 @@ static int tas5805m_i2c_probe(struct i2c_client *i2c)
 
 	dev_set_drvdata(dev, tas5805m);
 	tas5805m->regmap = regmap;
-	tas5805m->gpio_pdn_n = devm_gpiod_get(dev, "pdn", GPIOD_OUT_LOW);
-	if (IS_ERR(tas5805m->gpio_pdn_n)) {
+	tas5805m->gpio_pdn = devm_gpiod_get(dev, "pdn", GPIOD_OUT_HIGH);
+	if (IS_ERR(tas5805m->gpio_pdn)) {
 		dev_err(dev, "error requesting PDN gpio: %ld\n",
-			PTR_ERR(tas5805m->gpio_pdn_n));
-		return PTR_ERR(tas5805m->gpio_pdn_n);
+			PTR_ERR(tas5805m->gpio_pdn));
+		return PTR_ERR(tas5805m->gpio_pdn);
 	}
 
 	/* This configuration must be generated by PPC3. The file loaded
@@ -505,7 +505,7 @@ static int tas5805m_i2c_probe(struct i2c_client *i2c)
 	}
 
 	usleep_range(100000, 150000);
-	gpiod_set_value(tas5805m->gpio_pdn_n, 1);
+	gpiod_set_value(tas5805m->gpio_pdn, 0);
 	usleep_range(10000, 15000);
 
 	/* Don't register through devm. We need to be able to unregister
@@ -515,7 +515,7 @@ static int tas5805m_i2c_probe(struct i2c_client *i2c)
 					 &tas5805m_dai, 1);
 	if (ret < 0) {
 		dev_err(dev, "unable to register codec: %d\n", ret);
-		gpiod_set_value(tas5805m->gpio_pdn_n, 0);
+		gpiod_set_value(tas5805m->gpio_pdn, 1);
 		regulator_disable(tas5805m->pvdd);
 		return ret;
 	}
@@ -529,7 +529,7 @@ static int tas5805m_i2c_remove(struct i2c_client *i2c)
 	struct tas5805m_priv *tas5805m = dev_get_drvdata(dev);
 
 	snd_soc_unregister_component(dev);
-	gpiod_set_value(tas5805m->gpio_pdn_n, 0);
+	gpiod_set_value(tas5805m->gpio_pdn, 1);
 	usleep_range(10000, 15000);
 	regulator_disable(tas5805m->pvdd);
 	return 0;
-- 
2.35.1

On Wed, Mar 09, 2022 at 10:41:04AM +0000, John Keeping wrote:

> Fixes: ec45268467f4 ("ASoC: add support for TAS5805M digital amplifier")

Please don't insert fixes tags unless you're actually fixing a bug,
stylistic improvements like this - people try to use the tag for
backporting bug fixes and so on so extra tags create noise for them.

On Wed, Mar 09, 2022 at 12:12:47PM +0000, Mark Brown wrote:
> On Wed, Mar 09, 2022 at 10:41:04AM +0000, John Keeping wrote:
> 
> > Fixes: ec45268467f4 ("ASoC: add support for TAS5805M digital amplifier")
> 
> Please don't insert fixes tags unless you're actually fixing a bug,
> stylistic improvements like this - people try to use the tag for
> backporting bug fixes and so on so extra tags create noise for them.

This isn't purely stylistic - it affects the interpretation of pdn-gpios
in the device tree so that it matches all of the other bindings that use
this property: active means PDN asserted.

There are currently no in-tree users of the binding and the patch adding
it is queued for the next merge window.