From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Use the dev_err_probe() helper to simplify error handling during probe.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
---
 drivers/pinctrl/mediatek/pinctrl-paris.c | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 25d999848c2a..b587379eef4b 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -1024,6 +1024,7 @@ static int mtk_pctrl_build_state(struct platform_device *pdev)
 int mtk_paris_pinctrl_probe(struct platform_device *pdev,
 			    const struct mtk_pin_soc *soc)
 {
+	struct device *dev = &pdev->dev;
 	struct pinctrl_pin_desc *pins;
 	struct mtk_pinctrl *hw;
 	int err, i;
@@ -1036,11 +1037,9 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,
 	hw->soc = soc;
 	hw->dev = &pdev->dev;
 
-	if (!hw->soc->nbase_names) {
-		dev_err(&pdev->dev,
+	if (!hw->soc->nbase_names)
+		return dev_err_probe(dev, -EINVAL,
 			"SoC should be assigned at least one register base\n");
-		return -EINVAL;
-	}
 
 	hw->base = devm_kmalloc_array(&pdev->dev, hw->soc->nbase_names,
 				      sizeof(*hw->base), GFP_KERNEL);
@@ -1065,10 +1064,8 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,
 	spin_lock_init(&hw->lock);
 
 	err = mtk_pctrl_build_state(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "build state failed: %d\n", err);
-		return -EINVAL;
-	}
+	if (err)
+		return dev_err_probe(dev, err, "build state failed\n");
 
 	/* Copy from internal struct mtk_pin_desc to register to the core */
 	pins = devm_kmalloc_array(&pdev->dev, hw->soc->npins, sizeof(*pins),
@@ -1106,10 +1103,8 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,
 
 	/* Build gpiochip should be after pinctrl_enable is done */
 	err = mtk_build_gpiochip(hw);
-	if (err) {
-		dev_err(&pdev->dev, "Failed to add gpio_chip\n");
-		return err;
-	}
+	if (err)
+		return dev_err_probe(dev, err, "Failed to add gpio_chip\n");
 
 	platform_set_drvdata(pdev, hw);
 
-- 
2.35.1.616.g0bdcbb4464-goog