From: Rafał Miłecki <rafal@milecki.pl>

This matches pinctrl.yaml requirement and fixes:

Documentation/devicetree/bindings/mfd/brcm,cru.example.dt.yaml: pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
        From schema: Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 Documentation/devicetree/bindings/mfd/brcm,cru.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
index be4a2df71c25..b85819fbb07c 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
@@ -39,7 +39,7 @@ patternProperties:
   '^phy@[a-f0-9]+$':
     $ref: ../phy/bcm-ns-usb2-phy.yaml
 
-  '^pin-controller@[a-f0-9]+$':
+  '^pinctrl@[a-f0-9]+$':
     $ref: ../pinctrl/brcm,ns-pinmux.yaml
 
   '^syscon@[a-f0-9]+$':
@@ -94,7 +94,7 @@ examples:
             reg = <0x180 0x4>;
         };
 
-        pin-controller@1c0 {
+        pinctrl@1c0 {
             compatible = "brcm,bcm4708-pinmux";
             reg = <0x1c0 0x24>;
             reg-names = "cru_gpio_control";
-- 
2.34.1

On Wed, 16 Feb 2022, Rafał Miłecki wrote:

> From: Rafał Miłecki <rafal@milecki.pl>
> 
> This matches pinctrl.yaml requirement and fixes:
> 
> Documentation/devicetree/bindings/mfd/brcm,cru.example.dt.yaml: pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
>         From schema: Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
>  Documentation/devicetree/bindings/mfd/brcm,cru.yaml | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog